• TTA 저널
• /
• 통권75호
• /
• pp.63-73
• /
• 2001

• TTA 저널
• /
• 통권93호
• /
• pp.127-131
• /
• 2004

• 한국가금학회지
• /
• 제42권3호
• /
• pp.215-221
• /
• 2015

Chicken breast meat samples were injected with marinade solution (salt, sugar, phosphate, monosodium glutamate, and nucleic acid) with or without 2% citrus peel extract (CPE), and then a subset were irradiated with a 1 or 2 kGy electron beam (EB) and/or subjected to high-pressure (HP) at 300 or 400 MPa. The initial total aerobic bacterial (TAB) count of the control sample was 4.57 log CFU/g and reached 7.17 log CFU/g after 3 days of storage at $4^{\circ}C$. The 2 kGy EB reduced the TAB count to 4.61 log CFU/g after 7 days. The 400 MPa HP treatment was also effective in reducing the TAB count, but the effect was slightly less than that noted with the 2 kGy EB. The CPE, in combination with the EB and HP, decreased the TAB count by 1.71 and 1.32 log CFU/g at the initial stage and further decreased the count during storage. The 2 kGy EB and the HP (300 and 400 MPa) increased the thiobarbituric acid-reactive substances value, whereas the CPE did not show an antioxidative effect. The EB and HP caused no difference in the sensory qualities. In contrast, the CPE decreased all sensory qualities tested. Sensory panelists commented that the samples with CPE were not in the "rejection" category but were "unfamiliar" for chicken breast meat. In conclusion, the EB was more effective than HP in improving the microbial quality of marinated chicken breast meat. The use of CPE in the marinade solution may synergistically increase the shelf life; however, it is necessary to develop an appropriate formulation to ensure that the sensory qualities are maintained.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2001년도 추계공동학술대회 논문자료집 정보화 젼략 패러다임의 변화에 대한 보기술의 대응
• /
• pp.17-17
• /
• 2001

• 기술표준
• /
• 통권39호
• /
• pp.65-73
• /
• 2005

• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.307-315
• /
• 2019

Building prediction and control theory have been drawing the attention of many scientists over the past few years because design and control efficiency consumes the most financial and energy. In the literature, many methods have been proposed to achieve this goal by trying different control theorems, but all of these methods face some problems in correctly solving the problem. The Evolutionary Bat (EB) Algorithm is one of the recently introduced optimization methods and providing researchers to solve different types of optimization problems. This paper applies EB to the optimization of building control design. The optimized parameter is the input to the fuzzy controller, which gives the status response as an output, which in turn changes the state of the associated actuator. The novel control criterion for guarantee of the stability of the system is also derived for the demonstration in the analysis. This systematic and simplified controller design approach is the contribution for solving complex dynamic engineering system subjected to external disturbances. The experimental results show that the method achieves effective results in the design of closed-loop system. Therefore, by establishing the stability of the closed-loop system, the behavior of the closed-loop building system can be precisely predicted and stabilized.

• Journal of Radiation Protection and Research
• /
• 제46권1호
• /
• pp.8-13
• /
• 2021

Background: Salmonella enteritidis (SE) was the main cause of the pandemic of foodborne salmonellosis. The surface of eggs' shells can be contaminated with this bacterium; however, washing them with sodium hypochlorite solution not only reduces their flavor but also heavily impacts the environment. An alternative to this is surface sterilization using low-energy electron beam. It is known that irradiation with 1 kGy resulted in a significant 3.9 log reduction (reduction factor of 10,000) in detectable SE on the shell. FAO/IAEA/WHO indicates irradiation of any food commodity up to an overall average dose of 10 kGy presents no toxicological hazard. On the other hand, the Food and Drug Administration has deemed a dose of up to 3 kGy is allowable for eggs. However, the maximum dose permitted to be absorbed by an edible part (i.e., internal dose) is 0.1 Gy in Japan and 0.5 Gy in European Union. Materials and Methods: The electron beam (EB) depth dose distribution in the eggshell was calculated by the Monte Carlo method. The internal dose was also estimated by Monte Carlo simulation and experimentation. Results and Discussion: The EB depth dose distribution for the eggshells indicated that acceleration voltages between 80 and 200 kV were optimal for eggshell sterilization. It was also found that acceleration voltages between 80 and 150 kV were suitable for reducing the internal dose to ≤ 0.10 Gy. Conclusion: The optimum irradiative conditions for sterilizing only eggshells with an EB were between 80 and 150 kV.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.246-250
• /
• 2015

In this paper, Timoshenko and Euler-Bernoulli beam theories(EB-beam) are used, and Fast Fourier Transformation(FFT) analysis is then employed to extract their natural frequencies using both analytical approach and Co-rotational plane beam(CR-beam) EDISON program. EB-beam is used to analyze a spring-mass system with a single degree of freedom. Sinusoidal force with various frequencies and constant magnitude are applied to tip of each beam. After the oscillatory tip response is observed in EB-beam, it decreases and finally converges to the so-called 'steady-state.' The decreasing rate of the tip deflection with respect to time is reduced when the forcing frequency is increased. Although the tip deflection is found to be independent of the excitation frequency, it turns out that time to reach the steady state response is dependent on the forcing frequency.

• Journal of Information Technology Applications and Management
• /
• 제13권4호
• /
• pp.71-88
• /
• 2006

A business process specification (BPS) plays the role of a contracted business scenario in the execution of the B2B business process instances. XML based specification languages, such as BPSS, WS BPEL, etc., are usually adopted for the specifications. However, composing complex XML based specifications are not easy for humans. As an alternative, graphical modeling languages such as UML and BPMN can be employed. This paper presents an UML based modeling method for graphically specifying ebXML BPSS instances (namely, business process specifications). UML diagrams, directly matching with ebXML BPSS, can be reused for understanding and generating ebXML BPSS instances. We discuss the value of the method by developing a business reference library in the area of supply chain management.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.147-152
• /
• 2006

Failure mechanisms of electron beam physical vapor deposited thermal barrier coatings(EB-PVD TBCs) that occur during thermal cyclic oxidation were investigated. The investigations include microstructural degradation of NiCrAIY bond coat, thermally grown oxides(TGOs) along the ceramic top coat-substrate interface and fracture path within TBCs. The microstructural degradation of the bond coat during cyclic oxidation created Al depleted zones, resulting in reduction of NiAl and ${\gamma}$-Ni solid solution phase. It was observed that the fracture took placed primarily within the TGOs or at the interfaces between TGOs and bond coat.