• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.253-256
• /
• 2011

본 논문에서는 표면효과와 비선형 탄성효과를 고려한 FCC 나노박막의 순차적 멀티스케일 해석 모델을 제시한다. 표면에서의 구성방정식은 표면응력과 표면탄성계수를 이용하여 선형으로 표시되며, 표면효과를 나타내기 위한 표면물성들은 EAM 포텐셜을 이용한 원자적 계산 방법으로 계산된다. 두께가 얇은 나노박막은 표면응력으로 인하여 면내 방향으로 수축 또는 인장의 변형이 발생하게 된다. 나노박막의 평형상태에서의 변형율은 두께가 얇은 박막의 경우 재료가 선형 탄성 영역을 벗어나는 값을 가지는 경우가 많으므로 나노박막의 해석시 벌크 영역의 비선형 탄성 효과를 고려해야 한다. 이러한 비선형 탄성 효과를 고려하기 위해 본 연구에서는 FCC 구조를 가지는 금속의 비선형 탄성 모델을 제시하고, EAM 포텐셜로 계산된 응력과 탄성 계수를 이용하여 매칭 기법을 통하여 비선형 탄성 모델의 계수들을 결정한다. 또한 Cauchy-Born Rule 모델과 분자동역학 전산모사를 통하여 본 연구에서 제안된 비선형 탄성 모델에 대한 검증을 수행한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.817-820
• /
• 2002

In this letter, we developed a 400Gb/s optical transmitter using an electroabsorption modulator and measured its characteristics. As a result, the extinction ratio, the output power and the wavelength are varied while DC bias voltage and temperature of an electroabsorption modulator are changed. Based upon these experimental results, a design of 400Gb/s optical transmitter can be optimized.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.877-880
• /
• 2012

정보통신기술의 발전으로 기업의 내에서만 업무를 하던 시대에서 벗어나 언제 어디서나 손쉽게 업무를 수행할 수 있는 스마트워크 환경이 가능하게 되었다. 특히 모바일 디바이스의 성능 발전과 급속한 보급은 스마트워크를 이용하는 환경이 다양해지는 계기가 되었고 이로 인해 동일한 사용자라 할지라도 스마트워크에 접근하는 방법이나 환경이 동적으로 변경 될 수 있다. 이러한 특성은 보안 위협의 유형도 다양하게 하여 기업 내부의 정보를 보호하기 어렵게 만들었다. 이로 인해 기존의 사용자 정보 중심의 통합 인증 관리시스템인 EAM(Extranet Access Management)만으로 다양한 위협에 대응하기에는 부족하게 되었다. 이에 본 논문에서는 기존 EAM 시스템의 한계를 알아보고 스마트워크 환경에서 사용자 정보 외에 디바이스, 네트워크, 위치 정보를 활용하여 접근 시의 환경에 따라 사용자의 권한도 동적으로 생성하는 방식을 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.41-48
• /
• 2002

The bandwidth limitation of traveling-wave electroabsorption modulator(TW-EAM) is determined by the transit time, the velocity-mismatch between optical-wave and microwave, the impedance-matching, the dispersion and the microwave loss. In this paper, we introduce an hovel impulse response of TW-EAM considering transit time as well as velocity-mismatch. We analyze the effect of transit-time and velocity-mismatch at the same time, using the FDTD method. We investigate the modulation bandwidth by changing the depth of the intrinsic region. We suggest that the optimum depth of the intrinsic region is 0.2${\mu}{\textrm}{m}$ when the absorption coefficient($\alpha$) is 0.2${\mu}{\textrm}{m}$-1.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.643-644
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.711-712
• /
• 2011

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.188-188
• /
• 1999

The embedded atom method (EAM) of Daw and Baskes as a semiempirical method, has been successfully applied to the fcc or nearly filled d-band transition metals due to its computational feasibility and its methodological simplicity. Then Baskes modified the EAM (MEAM) to include directional bonding and applied it to metals, semiconductors, and diatomic gases, all of which have different types of bondings. Here, we present a detailed study of the energetics of adsorption on the fcc(111) surfaces and binary system within the framework of MEAM. In adsorption on fcc(111) surfaces, there are two energetically favored sites, so called, fcc site and hcp site, which may trigger stacking fault in the growth of films and might switch growth mode between 3D growth and layer by layer growth. We scrutinized the role of the hcp sites, which would offer dynamic growth pathways although the dynamics are not yet clear within the limited experimental resolution. Featuring these transient motions in the atomic level should contribute to the understanding the growth mechanisms on fcc(111) surface. And we also applied MEAM for initial stage energetics at the Cr coverage of sub- monolayer on W(110). We hope that recently observed extraordinary growth behavior at the Cr coverage of 0.7 monolayer, self- organized nano-scale lines, can be resolved in this MEAM binary system calculation.

• Composites Research
• /
• v.24 no.3
• /
• pp.17-24
• /
• 2011

The EAM simulation of nanoindentation was performed to investigate misfit dislocation slip in the Ag/Cu. The film layer, whose thickness in the range of 2-5nm, was indented by a spherical indenter with the N$\'{o}$se-Hoover thermostat condition. The simulation shows that the indentation position relative to misfit dislocation (MFD) has the effect on the dislocation, glide up or cross slip, for Ag film layer thickness less than 4 nm. Elastic energy variation during MFDs slip was revealed to be a key factor for the softening of Ag/Cu. The critical film layer thickness was evaluated for each case of Ag/Cu according to the spline extrapolation technique.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.129-137
• /
• 2011

In this paper, a fast and reliable emergency broadcasting system for Advanced Television System Committee (ATSC) Mobile DTV is proposed. The proposed protocol is based on the Emergency Alert Message (EAM) standard currently used for cable TV emergency broadcasting in the United States. The protocol is implemented and evaluated to enable fast emergency information propagation. ATSC Mobile DTV enables digital mobile broadcasting without affecting the existing ATSC legacy digital TV system. Since ATSC Mobile DTV devices are mobile and self-powered, they can effectively propagate emergency information. The proposed emergency broadcasting protocol can be applied in all countries adopting the ATSC standard.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.53-62
• /
• 2005

This paper presents an interface configuration between the Access Point(AP) of Wibro and Radio Over Fiber(ROF) transceivers for the wireless broadband internet system. The wireless internet could provides 60km/h mobility and 50Mbps IP based data services for each mobile terminal. Thus, low cost of each cell is inevitably required. This paper suggests an interface configuration between AP and Passive Integrated Picocell(PIP) involving ROF links. Characteristics of a typical Fabry-Perot ROF link and a PIP using a passive Electro-Absorption Modulator(EAM) are described and measured for wireless internet applications. In addition, results of RF coverage of a PIP have been shown.