• Title/Summary/Keyword: E4/E6 ratio

Search Result 1,237, Processing Time 0.031 seconds

Unconfined Compressive Strength Characteristics of Eco-Friendly Stabilizers and Carbon Fiber Reinforced Soil (친환경고화재와 탄소섬유 보강토의 일축압축강도 특성)

  • Sewook Oh;Sunghwan Yang;Hongseok Kim
    • Journal of the Korean GEO-environmental Society
    • /
    • v.25 no.8
    • /
    • pp.13-19
    • /
    • 2024
  • In this study, to reinforce the surface layer of weathered soil slopes where erosion and collapse of surface layer occur, compression strength tests were conducted by mixing carbon fiber and eco-friendly stabilizer (E.S.B.) To determine the optimal mixing ratio of E.S.B. and carbon fiber, E.S.B. was set at conditions of 10%, 20%, and 30%, and carbon fiber at 0.3%, 0.6%, 0.9%, and 1.2%. Additionally, to analyze the changes in compressive strength according to dry density and curing period, 85% and 95% of the maximum dry unit weight were applied, and curing periods were set to 3 days, 7 days, and 28 days. The standard strength for surface layer reinforcement of slopes is proposed as 4 MPa at 7 days and 6 MPa at 28 days according to ACI 230.1R-09 (2009). The compression test results showed that the unconfined compressive strength of E.S.B. reinforced soil met the standard strength at an E.S.B. mixing ratio of 10% or more for 95% compaction. Moreover, when carbon fiber was mixed with E.S.B. reinforced soil, a ductile fracture pattern was observed after the yield point due to compressive strength, indicating that the mixture could compensate for post-yield failure. It was analyzed that the maximum strength is exhibited at a carbon fiber mixing ratio of 0.6%. The unconfined compressive strength of carbon fiber reinforced soil increases by approximately 54-70% compared to the condition without carbon fiber.

Effect of Rib Pitch on Heat Transfer and Friction Factor in a Two Wall Divergent Channel (2벽면 확대 사각채널에서 리브 피치가 열전달과 마찰계수에 미치는 효과)

  • Ahn, Soo Whan;Lee, Myung Sung;Jeong, Seong Soo;Bae, Sung Taek
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.26 no.4
    • /
    • pp.175-180
    • /
    • 2014
  • Experimental investigations of the heat transfer and friction factors in the ribbed divergent rectangular channel with the channel exit hydraulic diameter to inlet hydraulic diameter ratio of 1.16 were performed. The surface heaters were mounted onto the two opposite walls. The main experimental parameter is the ratio of rib pitch (p) to height (e), at which the ratios (p/e) of 6, 10, and 14 are considered in the channel with ribs on one wall only. The straight ribbed square channel is also considered as a comparison. The major findings are that the ratio of p/e = 6 shows the highest values in the heat transfer and the ratio of p/e = 10 indicates the greatest friction factor in the ribbed divergent channel. Editor's note:No major changes or corrections needed. Well written.

Relationship between Hypertension and the Declining Renal Function in Korean Adults (한국 성인에서 고혈압과 신기능 저하와의 관련성)

  • Lee, Jun Ho
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.53 no.1
    • /
    • pp.32-40
    • /
    • 2021
  • This study examined the association between hypertension (HTN), estimated glomerular filtration rate (eGFR), and urine microalbumin/creatinine ratio (ACR) in Korean adults. Data for 8,922 adults (3,941 men and 4,981 women) aged ≥20 years from the Sixth Korean National Health and Nutrition Examination Survey VI (2013~2014) were analyzed. In men, after adjusting for the related variables, the odds ratios (ORs) of HTN [systolic blood pressure (SBP) ≥140 mmHg, diastolic blood pressure (DBP) ≥90 mmHg, or use of HTN medications] were significantly higher in the decreased eGFR group [eGFR <60 mL/min/1.73 ㎡, 1.98 (95% CI, 1.21~3.24)], elevated ACR group [ACR ≥30 mg/g, 2.03 (95% CI, 1.54~2.69)], and decreased eGFR plus elevated ACR group [eGFR <60 mL/min/1.73 ㎡ and ACR ≥30 mg/g, 6.03 (95% CI, 2.82~12.92)] than in the normal group (eGFR ≥60 mL/min/1.73 ㎡ and ACR <30 mg/g). In women, after adjusting for the related variables, the ORs of HTN were significantly higher in the decreased eGFR group (2.29, 95% CI, 1.27~4.13), elevated ACR group (2.22, 95% CI, 1.68~2.94), and decreased eGFR plus elevated ACR group (10.77, 95% CI, 3.89~29.82) than the normal group. In conclusion, HTN was associated with a decreased eGFR and elevated ACR in Korean men and women. In addition, the prevalence of HTN increased greatly when a decreased eGFR and elevated ACR occurred simultaneously.

Arsenic 분압에 따른 GaAs 양자 구조 표면 변화

  • Lee, Eun-Hye;Song, Jin-Dong;Kim, Su-Yeon;Han, Il-Gi;Jang, Su-Gyeong;Lee, Jeong-Il
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.155-155
    • /
    • 2011
  • 반도체 양자링은 양자점과 같이 효율이 높은 광학 소자 및 전자 소자에 응용 가능할 뿐 아니라, 양자점과는 다른 흥미로운 현상 연구가 가능하기 때문에 지속적으로 연구되고 있는 양자 구조이다. 특히, 반도체 양자링은 다양한 양자 구조를 형성하기 위한 기초 구조로 사용될 수 있으므로, 반도체 양자링 구조의 형성 메카니즘을 연구하는 것 또한 중요하다. 본 연구에서는 Molecular Beam Epitaxy (MBE)를 이용하여 N-type (100) GaAs 기판 위에 GaAs 양자 구조를 형성하였다. As4 분압의 영향, 즉 3-5 ratio가 표면 양자 구조 변화에 미치는 영향을 관찰하기 위해 3족과 5족을 분리하여 성장하는 전형적인 성장 방식인, droplet epitaxy mode를 사용하였다. 성장 온도, Ga metal droplet 밀도 등의 조건을 고정하고 Arsenic 분압을 1e-5 torr부터 3e-8 torr로 감소시켰을 때 표면 이미지를 AFM과 SEM으로 관찰하였다. As4 분압이 1e-5 torr일 때 양자점의 표면 형상을 보여주다가 As4 분압을 줄여갈수록 양자점의 크기가 증가하면서 As4 분압 1e-6 torr에서는 SEM 이미지 상으로도 분명한 양자링을 관찰할 수 있었다. 특히 주목할 것은 As4 분압 1e-6 torr에서 더 줄여갈수록 양자링 중앙 부분의 낮은 부분이 점점 넓어졌다는 점이다. 이것은 As4 분압 1e-6 torr 이상의 조건이 As4와 Ga atom이 결합하여 GaAs 양자점을 형성하는데 적절한 3-5 ratio의 조건인 반면, 그보다 적은 As4 분압에서는 As4와 결합하지 못한 Ga atom의 표면 migration에 의한 driving force로 인해 양자링이 형성되었다고 추측할 수 있다. 이렇게 형성된 양자링을 열처리 후 macro-PL 측정을 통해 광학적 특성을 보고자 하였다. 그 결과 같은 조건에서 열처리되어 PL 측정한 양자점의 에너지에 비해 peak position이 blue shift한 것을 볼 수 있었다. 이것은 As4를 제외한 같은 조건에서 성장된 양자 구조에서 양자링의 경우 양자점에 비해 그 높이가 낮음을 추측해 볼 수 있다. 양자 구조의 모양과 광학 특성의 관계를 밝히기 위해 추후 추가 측정 및 분석이 필요할 것이다.

  • PDF

Quality Characteristics of Brown Sauce Prepared with Rice Powder Beurre mani$\acute{e}$ (쌀가루 Beurre mani$\acute{e}$를 사용한 브라운 소스의 품질 특성)

  • Kim, Ki-Young;Kim, Sung-Kook;Yoo, Seung-Seok
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.19 no.2
    • /
    • pp.247-255
    • /
    • 2009
  • This study examined the quality characteristics of brown sauce prepared with rice powder in place of wheat flour, which is the commonly used thickener. With regard to the general components, as the level of rice powder increased and its ratio in the stock increased, moisture decreased and crude protein, lipid, and ash increased. Reducing sugar content was 4.72% in the control group, and as the mixing ratio of stock to rice powder increased from 100:5 (S1) to 100:13 (S5) in the rice powder-added groups, reducing sugar content increased from 3.94% to 4.82%, respectively. In terms of Hunter's color values, as more rice power was added to the beurre mani$\acute{e}$, L, a, and b values increased. Thus, a sauce of a light brown color was appropriately made. For consistency, as more rice powder beurre mani? was inserted into the analyzer, flow was reduced and viscosity significantly increased. The pH of the control (CS) was 4.94, and there were no significant differences between the control and the rice powder-added groups. In sensory evaluations, color presented its highest score as 6.47 when the mixing ratio of stock to beurre mani$\acute{e}$ was 100:7 (S2). S2 also received the highest score for flavor at 6.32. Viscosity was highest in the control (CS) at 6.26, and was not significantly different from the 100:7 (S2) or 100:9 (S3) groups. Finally, the S2 group had the highest scores for taste (6.21) and overall-acceptability (6.30). In correlation analyses between the sensory characteristics, overall-acceptability as well as the color, flavor, viscosity, and taste of the brown sauce all presented comparatively high positive correlations, in which overall-acceptability and color had the highest correlation.

  • PDF

Effects of the Wire-screen Rib on Heat Transfer and Friction Factors (와이어 스크린 리브이 열전달과 마찰계수에 미치는 효과)

  • Oh, Se-Kyung;Ahn, Soo-Whan;Lee, Dae-Hee
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.2
    • /
    • pp.196-203
    • /
    • 2011
  • Experiments to determine heat transfer coefficients and friction factors are conducted on a stationary transverse parallel wire-screen rib roughened rectangular channel. The test section consists of 198 mm (W) x 40 mm (H) x 712 mm (L). The channel has the aspect ratio of 4.95 and hydraulic diameter of $D_h$=6.66 cm. Four wire screen ribs and a solid rib are used. 0.1 mm-thick-stainless steel foil heaters and thermocouples (T type) are used to measure the heat transfer coefficients. Reynolds numbers studied range from 20,000 to 60,000. The wire-screen rib height (e) to hydraulic diameter ($D_h$) ratio ($e/D_h$) is 0.075; spacing (p) to height ratio (p/e) is 10. Results indicate that the solid rib produces the greatest Nusselt number and friction factor.

A study on reduction of excess sludge in activated sludge system from a petrochemical plant using electro fenton process (전기펜톤공정을 이용한 석유화학공장 폐활성슬러지의 감량화 가능성 평가)

  • Chung, Chong Min;Kim, Kyung Il;Shim, Natalia;Park, Chul Hee;Lee, Sang Hyup
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.23 no.5
    • /
    • pp.669-678
    • /
    • 2009
  • The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

AC Breakdown Voltage Characteristics of $SF_6/CF_4$ and (E/P)crit in quasi-uniform Field (준평등전계에서 $SF_6/CF_4$ 혼합가스의 절연 파괴 전압 및 임계전계 특성)

  • Lee, Byung-Taek;Hwang, Cheong-Ho;An, Jung-Sik;Huh, Chang-Su
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1455_1456
    • /
    • 2009
  • $SF_6$ is the most commonly used insulating gas in electrical systems. But In these days $SF_6$ mixtures and alternative gas has been studied because of global warming. so although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/CF_4$ mixtures. At present study the breakdown characteristics of $SF_6/CF_4$ mixtures in quasi-uniform field was performed. This experiments were carried out under AC voltages. The rod-rod electrode was used with 5 mm gap distance. The mixture of $SF_6/CF_4$ containing 20%,50%,70% of $SF_6$ were compared with pure $SF_6$ and $CF_4$ gas and gas pressure ranged from 0.1 to 0.5 MPa. The show that the breakdown voltages of gas were linearly increased according to the pressure in quasi-uniform field. For breakdown vlotage values of $(E/P)_{crit}$ are important. Because If values of (E/P) is a little more than $(E/P)_{crit}$, electrons rapidly increase and streamer discharge gernerates. Through this experiments values of $(E/P)_{crit}$ are found to vary with the ratio of $SF_6/CF_4$ mixture according to the following relationship. $V_b=(E/P)_{crit}{\cdot}p{\cdot}d$

  • PDF

A New Species of Eudactylopus (Copepoda: Harpacticoida) from the South Coast of Korea Based on Morphological and Molecular Evidence

  • Cho, Dae Hyun;Wi, Jin Hee;Suh, Hae-Lip
    • Animal Systematics, Evolution and Diversity
    • /
    • v.34 no.3
    • /
    • pp.127-142
    • /
    • 2018
  • A new species of Eudactylopus Scott A., 1909 is described from the southern coast of Korea. The specimens were collected using a light trap set overnight at the entrance near a pier. Eudactylopus yokjidoensis n. sp. is similar to E. andrewi Sewell, 1940 and E. spectabilis (Brian, 1923) in two key respects: similar length of proximal and distal inner setae on female P2 enp-2, and modification of two subapical setae on male P2 endopod. However, E. yokjidoensis can be differentiated from the two species by following morphological characteristics: in females, the length ratio of cephalothorax/2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.8 vs. 1 : 1); antennule has nine segments (vs. 7-segmented in E. andrewi); P2 to P4 each bears a process in medial distal margin of basis, while it is just smooth in E. spectabilis; in males; the length ratio of cephalothorax to 2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.6 vs. 1 : 1 in E. andrewi and 1 : 0.8 in E. spectabilis); and P5 exopod has a comb-like innermost seta, while it is bipinnate seta in E. spectabilis. To prove the Korean species of Eudactylopus to be new, full descriptions of both sexes are given here, and the claim is supported by distinct genetic differences between E. yokjidoensis and E. spectabilis (22.3-22.7%) in the mitochondrial gene cytochrome oxidase subunit I(mtCOI) sequence.

Study of bacterial contamination from the Cockroaches in hospital (병원내 바퀴의 세균오염에 관한 연구)

  • 고송자
    • Journal of Korean Academy of Nursing
    • /
    • v.10 no.2
    • /
    • pp.53-61
    • /
    • 1980
  • Hospital has a limited environment in which all different patients are accommodated and therefore it should always be maintained as clean as possible in all its aspects. However the habitation of cockroaches which may be frequently observed in hospital gives us a very unfavuoraqble impression. It may not b e difficult to presume that cocrkoaches carry various microganisms from ward to ward. This study was carried out from July to the end of August. 1979 with a total of 259 cockroaches captured from the three hospitals and general residences in Seoul. Investigation was made to see what kind o f organisms they were imbued with and the results obtained are summarized as follows. Totaly 1) The nine species of the microganisms were isolated from the captured cockroaches and the isolated rate was showed 96.6 %. This organisms consisted of Aerobacter aerogenes(29.7% ). staphylocacci (22.4% ). gram negative bacilli(16.6%). E. coli(10.4%), streptococci(9.7%). fugus(7.3), and yeast (0.4 %). respectively. 2) The ratio of organism isolated from the cockroaches captured in each hospital appeared 98.6% in K hospital. 91.4% in P hospital and 100% in S hospital. respectively. 3) The total ratio of microganisms isolated from cockroaches captured in each ward of the hospitals was 96.9% and that by each ward was 96.0% in medical ward. 98.0% in surgical ward. 96.4% ill operating room. and 100% in infant care room. 4) The ratio of the microganisms isolated from the cockroaches captured in the kitchen of each hospital was 94.1% and that in the K and S hospitals was 100% and the P hospital. 83.3%. 5) The germ-carrying ratio of cockroaches captured from the jiving rooms and kitchens of general residences was 100%. 6) The staphylococci was isolated as 22.4% of 259 the corchrnahes and all of them belonged to negative coagulase. 7) Finaly. E. coli (10.4%) and Aevbarter aerogenes(29.7%) were isolted from the 259 cock-roaches. This was sugested that a great number of habitable cockroaches contacts directly with faces.

  • PDF