• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.179-189
• /
• 2000

The purpose of this research is to complement the existing researches on landfill bottom liners behavior during the periods of freeze and thaw. Landfill-related researches have been typically focused on small-scale soil samples that are often compacted under conditions different from those used in the field. Although these tests have been invaluable in clarifying the problem of freeze and thaw, extending the results of such experimental studies to prototype landfills are questionable. In this investigation, the author utilized a large scale laboratory simulation allowing inclusion of the field depth of the cover systems, layered soil profiles, rainfall simulation, a cold climate and boundary conditions similar to those encountered in the landfill. The soil materials were stabilized soils (mixed clays, cements, and minerals) instead of clays. The bottom liners are made up of drainage layer (30 cm), stabilized layer (75 cm), and leach collection layer (60 cm). The stabilized layers are made up of supporting layer (45 cm) and low permeable layer (30 cm) - consisting of $P_A\; and\; P_B$ layer. As a results, depths of penetration increased by about 2~5 more centimeters at rainfall simulated designs than those at no rainfall simulated designs (that is design 3, design 5 and design 7) - it increased by about 20mm/day in the bottom liners and frost heaves also increased it by a few millimeters. Also, a few cracks appeared partly. According to these results, we can surmise that the compacted stabilized soil is more reliable than the compacted clay liners for construction of the landfill liners.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.87-96
• /
• 2003

The purposes of this study were to find out the optimum intensity of magnetic field where magnetism could promote the activity of osteoblast, and to discover the possibility of clinical application in the areas of dental implants and bone grafts by confirming the effect of clinically increasing bone formation. In this experiment, we used the Neodymium magnet, which had magnetic power six times as strong as the current ones and enabled the resistances against the demagnetization up to 20 to 50 times to be minimized with the size of 1mm in sight. In order to culture cells, a specially designed device was used. It was made to adjust the distance and accordingly to control the intensity of the magnetic field, by placing the cell culture plate in the center with a magnet of 1mm long and thick installed on the both ends. Using MC3T3-E1 cell, a kind of osteoblast-like cell, we cultured, for 24 hours, not only the test group which had been cultured under the magnetic fields with different intensity of 5, 10, 50, 100, 500, and 1000 Gauss, but also the control group excluding the influences of the magnetic field. After observing the cell's form and the density of the culture medium through an inverted microscope, we made a series of proceedings needed for the immunofluoroscence staining, such as fixation, normal serum reaction, primary antibody reaction, and secondary antibody reaction. And with a fluorescence microscope, we observed those-above and compared the frequency of expression of IFG-1 receptor. To make a Western immunoblotting analysis, the cells cultured under the same condition as the above had the procedure of the lysis buffer and the acrylamide gel electrophoresis was carried out. Protein transferred into the nitrocellulose membrane and tested on the primary and the secondary antibody reactions was observed and compared. The results were as follows: When observed through an inverted microscope, the nuclear divisions of the cells under the magnetic field of 10 Gauss were the most active, and the density of the cells could be observed the most enormously. As the result of an immunofluoroscence staining of IGF-1 receptor, the expression of IFG-1 was the most frequently observed under the magnetic field of 10 Gauss. On the other hand, few differences of consideration were made between the test group cultured under the magnetic fields of 5, 500, and 1000 Gauss and the control group. In respect of the expression of IFG-1 receptor, the test group cultured under the magnetic fields of 50 and 100 Gauss were higher than the control group, and lower than that cultured under the magnetic field of 10 Gauss.(p<0.05) According to the Western immunoblotting analysis, the band of IFG-1 receptor which had 85KDa of molecular weight was the darkest. Judging from the above-mentioned results, the growth factor receptor of an osteoblast cell which was an important criterion for the bone formation was increased in maximum under the magnetic field of 10 Gauss. Moreover it was observed that the optimum intensity of magnetic field in which magnetism made the activity of the osteoblast cell increase was about 10 Gauss.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.109-116
• /
• 1971

The study involved determination of resistance levels of spider mites to Metasystox, Folidol and C-8514 using slide dip technique: a feid trial of alternative acaricides using an O/P resistant strain. 1. Resistant strains of two-spotted spider mite( Tetranychus urticae Koch) were collected from Taegu, Kyungsan, Chunchun, Yesan, Suwon, Osan and Chungju, and kept in the glasshouse through the experiments. Resistant strains of European red mite (Panonychus ulmi Koch) were collected from Chungju, Taegu, Yesan, Chunchun, Suwon and Whasung, and Wonju susceptible was collected. Immediately after collection, tests were applied. All strains except susceptible populations had regularly been sprayed with Organo-phosphates including Parathion (or Folidol), Metasystox, Phenkapton and Trithion for more than the ten Bast years; and Organo-chlorines such as Kelthane and C-8514 more than five years. Comparisons of the resistant strains and susceptible strains at the $LC_50$ values are as follows: a. With Metasystox, resistance levels of the Chungju, Taegu, Yesan, Chunchun and Suwon resistant strains of P. ulmi were respectively, 96,52,4,3 and 2, times as resistant as the Wonju susceptible strain. b. With Folidol, resistance levels of the Chungju, Chunchun, Yesan, Whasung and Suwon strains of P. ulmi showed respectively, 126, 48, 33, 30 and 6-fold resistance levels over the susceptible strain. c. With C-8514, resistance levels of the Taegu, Suwon, Whasung and Chungju strains of P. ulmi were 42, 31, 30 and 20 times greater than the susceptible strain, respectively. d. With Metasystox, resistance levels of the Taegu, Chunchun, Yesan and Suwon, strains of T urticae were respectively, 32,29,25 and 17 times as resistant as the susceptible strain. e. With C-8514, resistance levels of the Taegu, Chungju and Kyungsan strains of T. urticae showed respectively, 59, 29 and 19-fold resistance levels over the Osan strain. 2. Field trials were carried out to assess the toxicities of eleven alternative materials which would be used for control of O/P resistant strain of Panonychus ulmi. The acaricide groups represented were 2 Organo-chlorines (Kelthane MF and Prethylen), 1 carbamate (Furadan), 1 nitrophenyl (Morocide), 1 carbonate (Morestan), 1 tin(Plictran), 1 fluorine (Nissol), 2 mixtures (Fundal and Banmite) and Organo-phosphate (Phenkapton). Of all acaricides tested Kelthane, Plictran, Fundal and Morestan were the most effective; fol]owed by Banmite, Furadan, Prethylen and Nissol. Sumite and Morocide were intermediate, but Phenkapton(Organo-phosphate) was very poor. In other words, a first application of the above outstanding materials gave very high degrees of control of O/P resistant population of European red mite for about 7 to 12 days. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage to apple trees by any of the acaricides tested of the concentrations used.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.9-34
• /
• 2004

The present study reviews the license registration status of dental technicians and dentists from 1970 to 2002, the number of technician members of The Korea Dental Technician Association from 1990 to 2003, and the number of dentist members in 2003. It also considers the yearly membership fluctuations, its growth rates, yearly increase/decrease, the rate of dentist to dental technician, regional distribution of association members, regional yearly increase/decrease of the members, and the regional distribution of dentists and dental technicians. The purpose is to identify and predict the problems in the demand/supply of dental technicians and the regional imbalance of manpower distribution. By doing so, this study attempts to propose the appropriate standard for the supply of dental technicians and point out the necessity of making mid- or long-term plans for ensuring the efficiency of manpower supply and balanced regional distribution. The result is as follows: 1. The number of dental technicians and dentists in 2002 has grown 36.79 and 9.27 times from 1970, and 2.20 and 2.05 times from 1990, respectively. It tool 11 years for the twofold increase of dental technicians from 1990, one year faster than the same increase of dentists. The number of dental technicians per a dentist was the lowest in 1972 (0.21 person), and the highest in 2002 (0.86 person). Specifically, the fastest growth was observed for a year from 1983 (0.47 technician per a dentist) to 1984 (0.6). From 1984 to 1986, the ratio grew by 0.1 every year. Summing up the numbers of dentists and dental technicians who passed the national certification examination, this study predicted the number of dental technicians per a dentist to be 0.88 in 2003, and 0.90 in 2004. 2. From 1990 to 2003, the average distribution of dental technician was 71.76% in the metropolitan areas and 28.24% in other smaller regions. The proportion of dental technicians working in the three major cities (Seoul, Busan, and Daegu) was the lowest in 2001 (52.39%) and the highest in 1996 (62.66%). The majority number of dental technicians who practiced in the metropolitan areas (about 70% of the entire population) were in service in the three major cities. 3. Compared with 1990, the number of dental technicians in 2003 grew 2.28 times in the large cities, and 2.05 times in other smaller regions. The yearly growth rate was the highest in 1994 over the previous year: 26.06% in large cities and 17.86% in the other regions. In the large metropolitan cities, the growth rate was the highest in Incheon (5.8 times for 5 years from 1998 to 2003), In the rest of the regions, the increase of dental technicians was the highest in Gyeonggi (6.5 times from 1990 to 2003). 4. In 2003, as much as 73.40% of all the members of the Korea Dental Technician Association were distributed in the large metropolitan cities, and the rest 26.60% were in other smaller regions. Meanwhile, 54.35% of the dentists practiced in the metropolitan cities, and the rest 45.65% were in service at other regions. This result indicates that more dental technicians than dentists are concentrated in large cities. More than half of all the technician members of the Association are distributed in the three major cities (i.e. Seoul, Busan, Daegu). On the other hand, 42.03% of dentist members are in these three cities and 53.97% of them practice in Seoul, Gyeonggi, and Busan. In 2003, the ratio of dentist to dental technician is 1:0.43 in general, while the ratio is 1:0.58 in the metropolitan cities, and 1:0.43 in other regions. In 2003, 33.30% of all the certified dental technicians are the member of the Korea Dental Technician Association, while 66.82% of all the licensed dentists are its members.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.76-82
• /
• 2009

Wheat is the most widely cultivated cereal and an important source of dietary protein worldwide. Wheat allergy, defined as an adverse immunologic reaction to wheat, encompasses a broad spectrum of disorders with different pathomechanisms and clinical manifestation. The Nuruk, a traditional Korean Koji for brewing, was made with wheat flour and fermenting microbes such as bacteria, yeast and mold. The strains grown on Nuruk secrete various enzymes as amylase and protease. By the activation of such enzymes, starch and proteins in Nuruk are hydrolyzed to sugar and amino acid. Therefore, it is supposed to reduce allergic proteins in wheat. To study quality properties and degradation degree of allergenicity in Nuruk by fermentation, we investigated the changes of general ingredients and allergenicity in Nuruk during fermentation. Moisture contents was decreased from 24.2% to 13.6% during fermentation. Crude lipid and protein contents were gradually increased during fermentation. After 15 days of fermentation, reducing sugar and total sugar contents were reached its maximum level, and they were 27.45% and 39.00%, respectively. Acid and neutral protease activity were significantly increased during fermentation, but alkaline protease activity was not detected. ${\alpha}$-amylase activity was gradually increased and showed maximum level about 2,833.00 U/g after 15 days of fermentation. Glucoamylase activity was the highest level about 497.9 U/g after 10 days of fermentation. The increase of these proteolytic and saccharogenic enzyme activities will provide efficient condition for production of rice wine. Also, protein fractions were isolated from Nuruk, and degradation of these proteins during fermentation were confirmed by SDS-PAGE. IgE immunoblotting using patient's sera with wheat allergy was performed to confirm allergenic protein in Nuruk. These results as fermentation of Nuruk will provide a useful tool for developing safer wheat products to prevent wheat allergy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1560-1566
• /
• 2013

This study was conducted to find out the effects of aqueous extract from the leaves of Artemisia capillaris (AA) on the reduction of hepatotoxicity induced by ethanol in rats. In this experiment, Sprague Dawley rats were used in the experimental groups, which were divided into 5 groups; normal group, ethanol+UDCA (ursodeoxycholic acid)-treated group (positive control), ethanol-treated group (control), ethanol+Artemisia capillaris aqueous extract-treated group (200 mg/kg of BW) and ethanol+Artemisia capillaris aqueous extract-treated group (400 mg/kg of BW). AST (aspartate aminotransferase), ALT (alanine aminotransferase), GGT (gamma(${\gamma}$)-glutamyl transferase) and LDH (lactate dehydrogenase) activities of the ethanol+Artemisia capillaris aqueous extract-treated group (400 mg/kg of BW) were significantly decreased compared to that of the ethanol-treated group (P<0.05). The triglyceride level of the ethanol-treated group was significantly increased and the HDL-cholesterol level was significantly decreased compared to the normal group (P<0.05). On the other hand, the triglyceride level was significantly decreased (P<0.05) and the HDL-cholesterol level was significantly increased (P<0.05) in the ethanol+Artemisia capillaris aqueous extract-treated groups. Superoxide dismutase (SOD) activity was enhanced significantly (P<0.05) in the ethanol+Artemisia capillaris aqueous extract-treated groups. Also, malondialdehyde contents were decreased in this group (P<0.05). Histologically, in the control group, there was a mild degenerative change around central venule. The AA treated group showed well preserved lobular architectures with no evidence of steatosis or liver damage in aqueous extract from the leaves of Artemisia capillaris treated group (H&E, ${\times}20$). As the results of this study, it is thought that Artemisia capillaris aqueous extract may have effects on the improvement of hepatic damage by ethanol.

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.115-137
• /
• 2010

Information technology (IT) outsourcing, the use of a third-party vendor to provide IT services, started in the late 1980s and early 1990s in Korea, and has increased rapidly since 2000. Recently, firms have increased their efforts to capture greater value from IT outsourcing. To date, there have been a large number of studies on IT outsourcing. Most prior studies on IT outsourcing have focused on outsourcing practices and decisions, and little attention has been paid to objectively measuring the value of IT outsourcing. In addition, studies that examined the performance of IT outsourcing have mainly relied on anecdotal evidence or practitioners' perceptions. Our study examines the contribution of IT outsourcing to economic growth in Korean industries over the 1990 to 2007 period, using a production function framework and a panel data set for 54 industries constructed from input-output tables, fixed-capital formation tables, and employment tables. Based on the framework and estimation procedures that Han, Kauffman and Nault (2010) used to examine the economic impact of IT outsourcing in U.S. industries, we evaluate the impact of IT outsourcing on output and productivity in Korean industries. Because IT outsourcing started to grow at a significantly more rapid pace in 2000, we compare the impact of IT outsourcing in pre- and post-2000 periods. Our industry-level panel data cover a large proportion of Korean economy-54 out of 58 Korean industries. This allows us greater opportunity to assess the impacts of IT outsourcing on objective performance measures, such as output and productivity. Using IT outsourcing and IT capital as our primary independent variables, we employ an extended Cobb-Douglas production function in which both variables are treated as factor inputs. We also derive and estimate a labor productivity equation to assess the impact of our IT variables on labor productivity. We use data from seven years (1990, 1993, 2000, 2003, 2005, 2006, and 2007) for which both input-output tables and fixed-capital formation tables are available. Combining the input-output tables and fixed-capital formation tables resulted in 54 industries. IT outsourcing is measured as the value of computer-related services purchased by each industry in a given year. All the variables have been converted to 2000 Korean Won using GDP deflators. To calculate labor hours, we use the average work hours for each sector provided by the OECD. To effectively control for heteroskedasticity and autocorrelation present in our dataset, we use the feasible generalized least squares (FGLS) procedures. Because the AR1 process may be industry-specific (i.e., panel-specific), we consider both common AR1 and panel-specific AR1 (PSAR1) processes in our estimations. We also include year dummies to control for year-specific effects common across industries, and sector dummies (as defined in the GDP deflator) to control for time-invariant sector-specific effects. Based on the full sample of 378 observations, we find that a 1% increase in IT outsourcing is associated with a 0.012~0.014% increase in gross output and a 1% increase in IT capital is associated with a 0.024~0.027% increase in gross output. To compare the contribution of IT outsourcing relative to that of IT capital, we examined gross marginal product (GMP). The average GMP of IT outsourcing was 6.423, which is substantially greater than that of IT capital at 2.093. This indicates that on average if an industry invests KRW 1 millon, it can increase its output by KRW 6.4 million. In terms of the contribution to labor productivity, we find that a 1% increase in IT outsourcing is associated with a 0.009~0.01% increase in labor productivity while a 1% increase in IT capital is associated with a 0.024~0.025% increase in labor productivity. Overall, our results indicate that IT outsourcing has made positive and economically meaningful contributions to output and productivity in Korean industries over the 1990 to 2007 period. The average GMP of IT outsourcing we report about Korean industries is 1.44 times greater than that in U.S. industries reported in Han et al. (2010). Further, we find that the contribution of IT outsourcing has been significantly greater in the 2000~2007 period during which the growth of IT outsourcing accelerated. Our study provides implication for policymakers and managers. First, our results suggest that Korean industries can capture further benefits by increasing investments in IT outsourcing. Second, our analyses and results provide a basis for managers to assess the impact of investments in IT outsourcing and IT capital in an objective and quantitative manner. Building on our study, future research should examine the impact of IT outsourcing at a more detailed industry level and the firm level.

• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.15-20
• /
• 2008

This study aimed at evaluating the effects of a molting diet method in molt induction and post-molt performance of laying hens. Eighty-one ISA Brown hens at 62 wk of age were randomly divided into three groups. After a 4-wk preliminary period, a control group was fed a corn-soybean-based layer diet, and for the other groups, molting was induced by starvation (MS) or feeding a molting diet (MD). For the MS group, feed was withdrawn for 2 wk; this was followed by feeding a layer diet every other day for 1 wk and then the control diet. The MD group was fed a molting diet containing low-protein and low-energy diet based for 4 wk; this was followed by feeding a layer diet. They had a free access to their diet and water. Egg production, egg quality, feed intake, and ovary and oviduct weights were measured throughout the experimental period. During molting, the feed intake in the MD group was lower than that of the control. Body weight of the molted groups was significantly reduced. The MS group feeding totally ceased egg production within 4d; after the initiation of feeding and decreased; in the MD group, egg production to 9.3% by d 10. On d 14, the ovaries and oviducts of the molted groups were distinctly lighter than those of the control. Throughout the post-molt period, egg production and egg shell thickness of the molted group improved; but there were no significant differences. Eggs from the MD-fed or control group were heavier than those of the MS-fed or control group. Finally, feeding of a low-protein and low-energy diet effectively induces molting and increase post-molt production, but further research will be conducted to determine the effects of the molt diet with other ingredients and to reduce the energy level of the molt diet for maximizing molt induction and post-molt egg quality.

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.553-560
• /
• 2004

This study was carried out to investigate the effect of packaging materials (general, charcoal) on the physicochemical properties of white, brown and black rices stored at 30'E . The weight losses of the rices were $2.2\~3.0\%$ during storage. The germination rates of the white rice packed with general (GW) and charcoal (CW) were both $0.0\%$, whereas those for the brown and black rices (GB and CB, and GBL and CBL) were 10.3 and $10.9\%$, and 11.8 and $12.1\%$, respectively, after 10 weeks of storage. With regard to the weight losses, there were no differences in the germination rates between the packaging materials. The hardness of the rice increased with increasing storage, but the change was smallest for the CBL (charcoal packed, black rice) and largest for the GW (general packed, white rice). The fat acidity of the rices was significantly increased with increasing storage time and those of the rices packed in charcoal materials were significantly lower than those packed in general packaging materials.