• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.432-436
• /
• 2014

While searching for healthier diets, people became more attentive to agricultural organic products. However, organic foods may be more susceptible to microbiological contamination because of the use of livestock manure compost and liquid manure, potential sources of pathogenic bacteria. This study was undertaken to investigate the persistence of Salmonella enterica, Escherichia coli O157:H7, and Listeria monocytogenes in soil, liquid manure amended soil, and liquid manure. Loamy soil, liquid manure amended soil, and liquid manure were inoculated with S. enterica, E. coli O157:H7, and L. monocytogenes. Samples were incubated in consistent moisture content at $25^{\circ}C$. Samples had been periodically collected during 120 days depending on the given conditions. S. enterica and E. coli O157:H7 survived over 120 days in loamy soil and over 60 days in liquid manure amended soil, respectively. L. monocytogenes decreased faster than other pathogens in soil. S. enterica, E. coli O157:H7, and L. monocytogenes survived for up to 5 days in liquid manure. S. enterica and E. coli O157:H7 in soil decreased by 2 to $2.5log\;CFU\;g^{-1}$ for 120 days. S. enterica and E. coli O157:H7 in liquid manure amended soil decreased slowly for 21 days. However, S. enterica, E. coli O157:H7, and L. monocytogenes sharply decreased after 21 days. S. enterica, E. coli O157:H7, and L. monocytogenes in soil increased by 0.5 to $1.0log\;CFU\;g^{-1}$ for 7 days. Foodborne pathogens in soil and liquid manure amended soil gradually decreased over time.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.84-95
• /
• 2002

• Kyungpook Mathematical Journal
• /
• v.53 no.4
• /
• pp.515-540
• /
• 2013

Let $G=O(2){\times}O(2){\times}O(2)$. Then a closed G-invariant minimal hypersurface with constant scalar curvature in $S^5$ is a product of spheres, i.e., the square norm of its second fundamental form, S = 4.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.163-173
• /
• 1997

Polystyrene/polycarbonate 조성이 약 50/50인 3종류의 Poly(carbonate-g-styrene) 공중합체의 동적 탄성율, E*($\omega$)와 동적 스트레인-광학계수 O*($\omega$)을 유리전이 영역부근의 여러온도에서 동시에 측정하여 연구하였다. 두 개의 공중합체는 각각의 스티렌 그라프트쇄 에 5, 10 wt%의 MAH를 함유하고 있다. 이들 공중합체의 E*($\omega$)와 O*($\omega$)완화거동과 그라 프트 공중합체의 상용성과 연관하여 비교 고찰하였다. 공중합체들의 E*($\omega$)는 전형적인 무 정형 고분자의 유리전이 완하거동을 보였으며 정성적인 차이를 발견할수 없었다. 그러나 고 강도의 단일 tan$\delta$분산의 저주파수 영역에 미세분산을 나타내, 공중합체는 2상으로 분리되 어 있음이 추정되엇다. 폴리스티렌 그라프트체에 무수 말레인산 함유량이 증가함에 따라, 저 주파수 영역의 미세피크가 $\alpha$주분산에 병합되어 성분 고분자간의 상호 형동성이 증가함을 알수 있었다. 3공중합체의 유사한 기계적 특성과는 달리, 광학적 완화 스펙트럼 O*($\omega$)는 정 성적으로 명확한 차이를 보여 공중합체들의 광학완화 거동이 명확히 다름을 나타냈다. 기계 적 특성보다는 광학적 특성이 공중합체내의 성분 고분자의 미세한 완하 거동에 훨씬 민감한 응답을나타냈다. 이러한 특성적인 공중합체의 O*($\omega$)차이를 공중합체의 조성단일 고분자 PS, PC의 O*($\omega$)의 가성성을 가정하여 모사하였다 모사에서 구한 광학적 부분 기여 파라메 터를 사용하여 공중합체의 상용성을 고찰하였다.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.540-544
• /
• 2000

The effect of atmospheric annearling on the densification and electrical poperty of the Ca-doped $YCrO_3$were investigated. In order to study the densification and elecrical properties of $Y_{0.7}Ca_{0.3}CrO3$ the sample sintered at $1700^{\circ}C$ for 12hrs were subsequently annealed at $1400^{\circ}C$ under various atmospheres($O_2$, Air, $N_2$)as a function of time. The density of $Y_{0.7}Ca_{0.3}CrO3$ was $4.5/cm^3$ before annealing. Under the $N_2$ annealingm the bulk density of $Y_{0.7}Ca_{0.3}CrO3$ was increased to $4.9g/cm^3$ at 24hrs and then remained unchanged at 48hrs. When $Y_{0.7}Ca_{0.3}CrO3$nwas annealing at $1400^{\circ}C$ for 12hrs and 24hrs under $O_2$ activation energies were about 0.16eV at 12hrs and 24hrs, and showed 0.167eV below 400K, and 0.24eV over 400K at 48hrs.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.113-119
• /
• 2019

The key features of 5G mobile communications recently commercialized can be represented by High Data Rate, Connection Density and Low Latency, of which the features most distinct from the existing 4G will be low Latency, which will be the foundation for various new service offerings. AR and self-driving technologies are being considered as services that utilize these features, and 5G Network Latency is also being discussed in related standards. However, it is true that the discussion of E2E Latency from a service perspective is much lacking. The final goal to achieve low Latency at 5G is to achieve 1ms of air interface based on RTD, which can be done through Ultra-reliable Low Latency Communications (URLLC) through Rel-16 in early 20 years, and further network parity through Mobile Edge Computing (MEC) is also being studied. In addition to 5G network-related factors, the overall 5G E2E Latency also includes link/equipment Latency on the path between the 5G network and the IDC server for service delivery, and the Processing Latency for service processing within the mobile app and server. Meanwhile, it is also necessary to study detailed service requirements by separating Latency for initial setup of service and Latency for continuous service. In this paper, the following three factors were reviewed for initial setup of service. First, the experiment and analysis presented the impact on Latency on the Latency in the case of 1 Data Lake Setup, 2 CRDX On/Off for efficient power, and finally 3H/O on Latency. Through this, we expect Low Latency to contribute to the service requirements and planning associated with Latency in the initial setup of the required services.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.135-135
• /
• 2008

Various biosensors were evaluated for identifying and detecting foodborne pathogens in a rapid and effective manner. First, five strains of Escherichia coli and six strains of Salmonella were identified using Fourier transform infrared spectroscopy and a statistical program. For doing this, lipopolysaccharides (LPSs) and outer membrane proteins (OMPs) were extracted from a cell wall of each bacterial strain. As a result, each strain was identifed at the level of 97% for E. coli and 100% for Salmonella. Second, E. coli O157:H7, S. Enteritidis, and Listeria monocytogenes were identified by multiplex PCR products from four specific genes of each bacteria using a capillary electrophoresis (CE). Also, ground beef for E. coli O157:H7, lettuce for S. Enteritidis, and hot dog for L. monocytogenes were used to determine the possibility of detecting pathogens in foods. Foods inoculated with respective pathogen were cultivated for six hours and multiplex PCR products were obtained and assessed. The minimum detection levels of tested bacteria were <10 cells/g, <10 cells/g, and $10^4$ cells/g for E. coli O157:H7, S. Enteritidis, and L. monocytogenes, respectively. Third, it was possible to detect S. Typhimurium in a pure culture and lettuce by a bioluminescence-based detection assay using both recombinant bacteriophage P22::luxI and a bioluminescent bioreporter. In addition, bacteriophage T4 was quantitatively monitored using E. coli including luxCDABE genes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.267-275
• /
• 2015

In this paper, ZnO films were prepared by atomic layer deposition (ALD) and CdS films were deposited using chemical bath deposition (CBD) to form ZnO/CdS heterojunction. More accurate mapping of band arrangement of the ZnO/CdS heterojunction has been performed by analyzing its electrical and optical characteristics in depth by various methods including transmittance, x-ray photoemission spectroscopy (XPS), and ultraviolet photoemission spectroscopy (UPS). The optical bandgap energies ($E_g$) of ZnO and CdS were 3.27 eV and 2.34 eV, respectively. UPS was capable of extracting the ionization potential energies (IPEs) of the materials, which turned out to be 8.69 eV and 7.30 eV, respectively. The electron affinity (EA) values of ZnO and CdS calculated from IPE and $E_g$ were 5.42 eV and 4.96 eV, respectively. Energy-band structures of the heterojunction could be accurately drawn from these parameters taking the conduction band offset (CBO) into account, which will substantially help acquisition of the full band structures of the thin films in the CIGS solar-cell device and contribute to the optimal device designs.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.325-330
• /
• 2001

고상반응법으로 이론 밀도의 약 97%의 소결 밀도를 갖는 N $d_{1-x}$S $r_{x}$G $a_{1-x}$M $g_{x}$ $O_{3{\delta}}$(x=0, 0.03, 0.07, 0.1) 고체전해질을 제조하였다. X선 회절 분석 결과, x=0.03일 때의 X선 회절도는 순수한 NdGa $O_3$와 같았으나, x=0.07, 0.1일 때에는 불순물이 나타났다. 교류 복소임피던스는 4$50^{\circ}C$~90$0^{\circ}C$의 온도 범위에서 공기 중에서 측정하였으며, 각 조성에 대하여 상호 비교 분석하기 위하여 복소비저항 스펙트럼으로 변환하여 해석하였다. 전기전도도는 N $d_{0.93}$S $r_{0.07}$G $a_{0.93}$M $g_{0.07}$ $O_{0.97}$(x=0.07) 시편이 90$0^{\circ}C$에서 6$\times$$10^{-3}$ S$cm^{-1}$ /로 가장 우수하였으며, 활성화 에너지는 저온 영역에서는 1 eV, 고온 영역에서는 0.74 eV이었다.다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.61-64
• /
• 2007

This study progressed fresh mortar test and hardening mortar test as a characteristic analysis of high strength mortar that is not water but replaced liquid, and the results are summarized as following. As a characteristic of fresh mortar, the flow that is following by the changes of the kind of replaced liquid decreased in order of E, M, A, K, O, L, G, and H, and it is indicated that liquid except H, the flow was better then others. The test show the bending strength of G, L, K, O at and H were more increased then plain as the replaced liquid change on the first day, and on the 28th day, G, L, and K was more increased then plain. The compressive strength of G, K, and O was similar with P(-10) at the first day. On 7th day, the test show G, and L was more increased then P(-10), and other replaced liquid were similar or decreased. On the 28th day, G, K, and A was similar with P(-10) and it is decreased in order of E, L, O, and H.