• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.620-636
• /
• 2015

Survivability is a necessary property of network system in disturbed environment. Recovery ability is a key actor of survivability. This paper concludes network survivability into a novel composite metric, i.e. Network Recovery Degree (NRD). In order to measure this metric in quantity, a concept of Source-Destination Pair (SD Pair), is created to abstract end-to-end activity based on end nodes in network, and the quality of SD Pair is also used to describe network performance, such as connectivity, quality of service, link degree, and so on. After that, a Survivability Test method in large scale Network based on SD pairs, called STNSD, is provided. How to select SD Pairs effectively in large scale network is also provided. We set up simulation environment to validate the test method in a severe destroy scenario and evaluate the method scalability in different large scale network scenarios. Experiment and analysis shows that the metric NRD correctly reflects the effort of different survivability strategy, and the proposed test method STNSD has good scalability and can be used to test and evaluate quantitative survivability in large scale network.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.10
• /
• pp.1746-1754
• /
• 2016

Recently, spherical beads entrapping quorum quenching (QQ) bacteria have been reported as effective moving QQ-media for biofouling control in MBRs for wastewater treatment owing to their combined effects of biological (i.e., quorum quenching) and physical washing. Taking into account both the mass transfer of signal molecules through the QQ-medium and collision efficiencies of the QQ-medium against the filtration membranes in a bioreactor, a cylindrical medium (QQ-cylinder) was developed as a new shape of moving QQ-medium. The QQ-cylinders were compared with previous QQ-beads in terms of the QQ activity and the physical washing effect under identical loading volumes of each medium in batch tests. It was found that the QQ activity of a QQ-medium was highly dependent on its specific surface area, regardless of the shape of the medium. In contrast, the physical washing effect of a QQ-medium was greatly affected by its geometric structure. The enhanced anti-biofouling property of the QQ-cylinders relative to QQ-beads was confirmed in a continuous laboratory-scale MBR with a flat-sheet membrane module.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.224-231
• /
• 1982

${\alpha}-Tocopherol$ was found to be a fluorescent probe in determination of the phasetransition temperature of liposome. Since this was a discovery of a new aspect of ${\alpha}-tocopherol$ as an important biochemical molecule, its molecular spectroscopic characterization was carried out in order to obtain some informations on its spectral and, structural properties in various media, anticipating that the compound may entertain a wide applications in biochemical systems as a spectroscopic probe. Two species of α${\alpha}-tocopherol$, monomer and dimer, were found to exist in organic media, especially in solvents of nonhydrogen bonding ability. Monomer with maximum UV-absorption around $(291{\sim}294nm)$ is highly fluorescent, while dimer which is formed by intermolecular hydrogen bonds and absorbes with spectral peak at 298nm is nonfluorescent. ${\alpha}-tocopherol$ incorporated to liposome exhibits emission property quite different from that in various organic media showing broad and red-shifted fluorescence excitation and emission spectra. This spectral abnormality is to be interpreted to arise from chromanolate-type ion, H-dissociated ${\alpha}-tocopherol$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.286-318
• /
• 1992

The objective of preventive dentistry is the maintenance of a healthy dentition for the life of a patient. Unfortunately, if an individual has not received the benefit of a comprehensive program of preventive dentistry and has finally reached the edentulous state, as a consequence, he receives a set of complete denture. Dentures are mechanical devices and subject to the principles of mechanics. In some cases, the general health and nutritional status of the patient are felt to be the causative factors. But, the most important thing in residual ridge resorption is felt to be caused by the unequal distribution of functional forces. This study was to analyze mandibular stresses of complete denture occlusion by three dimensional finite element method. The results were as follows ; 1. As deformation and stress distribution of the complete denture of the mandible were concentrated on the upper lingual side of the mandible, alveolar ridge resorption of the mandible occurred from lingual side to labio-buccal side. 2. Analyzing by three dimensional F. E. M., the mandible is a very effective form for tolerating stress and deformation biomechanically. 3. According to the concentration of stress distibution in the upper buccal side of the lower posteriors, buccal shelf area must be a primary stress bearing area in the lower complete denture. 4. Lower complete denture moved horizontally to the balancing side under lateral occlusal force. 5. Bilateral balanced occlusion should be constructed in the complete denture for denture stability, especially in the protrusive movement. 6. Physical property of the denture base material was as important for stress distribution in the denture base as or even more than that in the mandible. 7. Impression technique is very important because of most of stress was concentrated between them due to close contact of the mandible and the denture base.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.30-39
• /
• 2011

In this note, a systematic design of a new robust nonlinear continuous variable structure control system(VSCS) based on the modified state dependent nonlinear form is presented for the control of uncertain affine nonlinear systems with mismatched uncertainties and matched disturbance. After an affine uncertain nonlinear system is represented in the form of state dependent nonlinear system, a systematic design of a new robust nonlinear VSCS is presented. The uncertainty of the nonlinear system function is separated into the tow parts, i.e., state dependent term and state independent term for extension of target plants. To be linear in the closed loop resultant dynamics and in order to easily satisfy the existence condition of the sliding mode, the transformed linear sliding surface is applied. A corresponding control input is proposed to satisfy the closed loop exponential stability and the existence condition of the sliding mode on the linear transformed sliding surface, which will be investigated in Theorem 1. For practical application, the discontinuity of the control input as the inherent property of the VSS is improved dramatically. Through a design example and simulation studies, the usefulness of the proposed controller is verified.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.2
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.405-413
• /
• 2004

The rheological properties of an exopolysaccharide, EPS-R, produced by the marine bacterium Hahella chejuensis strain 96CJ 10356 were investigated. The $E_{24}$ of $0.5\%$ EPS-R was $89.2\%$, which was higher than that observed in commercial polysaccharides such as xanthan gum ($67.8\%$), gellan gum ($2.01\%$) or sodium alginate ($1.02\%$). Glucose and galactose are the main Sugars in EPS-R, with a molar ratio of ${\~}1:6.8$, xylose and ribose are minor sugar components. The average molecular mass, as determined by gel filtration chromatography, was $2.2{\times}10^3$ KDa, The intrinsic viscosities of EPS-R were calculated to be 16.5 and 15.9 dL/g using the Huggins and Kraemer equations, respectively, with a 2.3 dL/g overlap. In terms of rigidity, the conformation of EPS-R was similar to that of caboxymethyl cellulose ($5.0{\times}10^{-2}$). The rheological behavior of EPS-R dispersion indicated that the formation of a structure intermediate between that of a random-coil polysaccharide and a weak gel. The aqueous dispersion of EPS-R at concentrations ranging from 0.25 to $1.0\%$ (w/w) showed a marked shear-thinning property in accordance with Power-law behavior. In aqueous dispersions of $1.0\%$ EPS-R, the consistency index (K) and flow behavior index (n) were 1,410 and 0.73, respectively. EPS-R was Stable to pH and salts.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.856-865
• /
• 2011

This paper intends to examine how Fringe, which is in an inseparable relationship with modern fashion, has been changed and what characteristics it is expressed to have in fashion on the basis of its formative property expressed in modern fashion. In order to empirically analyze Fringe, this paper analyzed a total of 346 Fringe of every type that were generally found in the worldis four biggest collections, from 2006S/S to 2011S/S. This paper found some methods Fringe is made, which are: using a snagged fabric or knit as it is; intentionally snagging or tearing a fabric to make the effect of being snagged; knotting the tail or the edge of clothes, and then, macram$\grave{E}$; and cutting leather or suede, which canit be snagged easily, and making Fringe strands. Fringe strands which are made in the above ways are made into a band and then, attached, or Fringe strands, a feathers, a comb, or beads are attached one by one. Or a tassel is independently or consecutively applied to clothes or ornaments, which are expressed in the form of fringes. Threads, strings, leather, suede, metals, plastics, raffia, horsehair, paper, beads, pearls, crystals, or felt were used for rich texture or unique visual effects. Colors of various brightness and chromas were used in consideration of materials. Through the effects of sameness, similarity, contrast, harmony and gradation with colors of clothes, emphasis or unified harmony was expressed. The expressive characteristics of Fringe, which were found in the modern fashion through those formative characteristics, were organic rhythmical beauty, handicraft decorative beauty, and folksy natural beauty.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2001.06a
• /
• pp.237-257
• /
• 2001

This paper investigates the idiosyncratic understanding of universal quantifiers such as every, each or all by young children at the ages of 4 to 7, and argues that the phenomenon is explicable in terms of the maturation of both the cognitive system and the linguistic system. Evidence for this dual explanation comes from the fact that the visual input, a picture, plays a key role in determining the children’s conceptual representation, suggesting the need for the central integration of visual and linguistic elements; and from the fact that a quantifier in the linguistic input has an intrinsic property, i.e. a <+focus> feature. I have tried to explain the nature of the cognitive factors in terms of the function of the central system, suggesting a modified form of Smith & Tsimpli’s (1995) version of Fodor’s (1983) modularity hypothesis. Conceptual representations of two kinds are in competition with each other and they are integrated into a neutral LOT (Language of Thought) representation at some point . In the process of this integration, the representations from the visual input predominate over those from the auditory input, though the quantize. (treated as new information provided by the latter) is salient in the final representations. When visual conceptual representations predominate over purely linguistic ones, quantifier spreading errors occur. By contrast, when the relevant grammatical knowledge has developed sufficiently to counteract the conceptual representations, this peculiar behaviour by children should disappear. It is argued that children have to learn two kinds of grammatical fact with regard to universal quantification: (i) they have to learn the status of the quantifier as a functional head of DP so that it has to be positioned inside DP; and (ii) they have to learn the Left-Branch Condition which specifies that movement of an element in the left-branch position is possible only by pied-piping the entire phrase.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.30-33
• /
• 2015

We report the synthesis of Ni-doped $BaFe_2Se_3$ single crystals by using a flux method. X-ray diffraction (XRD) of $Ba(Fe_{1-x}Ni_x)_2Se_3$ shows a gradual peak shift with an increase in the nominal Ni-doping rate, x = 0, 0.05, and 0.10, due to a decrease in unit-cell volume. All samples show a spin glass transition, and temperature dependence of magnetic susceptibility shows a negligible change in the spin-glass transition temperature ($T_g$) with Ni concentration x. The temperature dependence of electrical resistivity for $BaFe_2Se_3$ shows an insulating behavior, and the resistivity value at 295 K and the activation energy ($E_a$) obtained from the Arrhenius plot decrease with increasing x. These results suggest that the Ni doping can be effectively worked as a dopant for electron charge carriers, but is less efficient in controlling the magnetic property, such as spin glass transition, in the $BaFe_2Se_3$ compound.