• 산업식품공학
• /
• 제15권2호
• /
• pp.169-174
• /
• 2011

This study was performed to analyze the effects of ultra fine pulverization (UFP) on the physicochemical properties of sweet potato starch (SPS). The average diameter and specific surface area of the SPS was decreased from 22.94 to 10.25 $\mu$m and from 0.879 to 1.909 $m^2$ /g throughout UFP, respectively, and the damaged starch content was increased from 13.7 to 99.2%. The pulverized sweet potato starch (PSPS) had higher swelling power, solubility, and transmittance values than the SPS. X-ray diffractograms revealed that the SPS had a C-type pattern, which disappeared in PSPS. The rapid visco analysis (RVA) characteristics, peak viscosity, break down, and set back of SPS ceased to exist in PSPS. According to differential scanning calorimetry (DSC) curves, the peak temperature ($T_p$) and gelatinization enthalpy ($\Delta$E) of SPS were $71.95^{\circ}C$ and 10.40 J/g, respectively, while these remained undetected in PSPS. The enzymatic digestibilities of SPS and PSPS were 61.7 and 84.7%, respectively.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.75-80
• /
• 2002

In this study, the initial number of bacteria before ozone sterilizing shows 290 per $1m{\ell}$ in RUN 1 and RUN 2 equally, but the removal rate shows more than 50% in RUN 1, and 100% in RUN 2 respectively when ozone injection amount is $0.28mg/{\ell}$. It is regarded as a satisfactory result that E-coli concentration without ozone contact is 890, rapid removal effect of E-coli is observed in $0.28mg/{\ell}$ of ozone, and E-coli is removed perfectly in $0.84mg/{\ell}$ of ozone. It is thought that an excellent efficiency is obtained for vibrio alginolyticus because the initial number of bacteria before ozone contact is positive, but it is altered to negative after ozone contact. CODcr shows the tendency which is somewhat reduced as the ozone injection is increased, but the general effect is appeared not so much, and it is thought that the tendency is caused by the reason that sea water contains much salt which is estimated as a component of CODcr, therefore it is regarded that ozone contact has not an important effect on salinity. It is thought that the frequency of changing salt water in the fish preserve of a sliced raw fish restaurant can be reduced to under the standard because NTU of 7 days after sea water injection is 0.70 in the experiment of turbidity, hut more than 50% of turbidity removal efficiency is appeared at $0.28mg/{\ell}$ of ozone injection, and it shows 70% at $0.84mg/{\ell}$ of ozone injection in RUN 1 and RUN 2 commonly.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.66-71
• /
• 2017

The autoignition temperature (AIT) is crucial combustible characteristics which need attention in chemical process that handle hazardous materials. The AIT, also to as minimum spontaneous ignition temperature(MSIT), is the lowest temperature of a hot surface at which the substance will spontaneously ignite without any obvious sources of ignition such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for process safety. This study measured the AITs of n-propanol+acetic acid system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-propanol and acetic acid which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-propanol+acetic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation). In the case of n-propanol and acetic acid system, the minimum autoignition temperature behavior (MAITB), which is lower than the lower AIT, is shown among the two pure substances constituting the mixture.

• 한국의류학회지
• /
• 제27권3_4호
• /
• pp.354-363
• /
• 2003

In this research, an internet-based fabric information system has been developed. Recently, the numbers of textile industries which have their own homepages to advertise their product fabrics fur apparel through the Internet and textile e-Commerce web sites rapidly increase. Unfortunately, traditional fabric information systems based on direct meeting and trust cannot give sufficient information to numerous visitors of the Internet sites including fabric buyers for apparel. They can just view 3-dimensional fabric images and text-based specifications such as fabric density, composition, colors, weight, etc. To solve these problems, the new fabric information system fur apparel has been developed. The web-based fabric information system is composed of the following six modules; $\circled1$ fabric database management system, $\circled2$ a 3-D fabric drape image viewer to illustrate fabric appearances, $\circled3$ a virtual wearing system to apply a fabric to garment designs, $\circled4$ a fabric property viewer to confirm fabric characteristics, $\circled5$ a QC (quality control) document generator to manufacture high qualify garments with a fabric, and$\circled6$actual display mall to view actual fabrics. The fabric information system is simply performed by visitors clicking the buttons hyper-linked with JAVA applets on web browser. The web-based fabric information system enables the web site visitors to understand fabrics shown on the Internet in more details.

• 한국결정성장학회지
• /
• 제23권4호
• /
• pp.180-188
• /
• 2013

삼척도계지역의 탄광에서 석탄채굴시에 부산물로 발생되는 사암계 석탄폐석을 원료로 사용하여 E-glass fiber 조성의 유리를 제조하였다. 본 연구에서는 카본함량이 비교적 적은 실리카-알루미나질의 사암계 석탄폐석을 사용하였으며, 폐석의 투입량을 0~35 %까지 변화시켰다. 서로 다른 석탄폐석 투입량을 갖는 배치원료를 $1550^{\circ}C$에서 2시간 용융하여 E-glass조성을 갖는 투명하고 맑은 유리가 얻어졌고, 81~84 %의 높은 가시광투과율, $5.39{\sim}5.61{\times}10^{-6}/^{\circ}C$의 열팽창계수, 851~$860^{\circ}C$의 연화점을 나타내었다. 유리섬유 시편은 $1150^{\circ}C$에서 섬유인상장치를 통해 얻어졌고, 복합재료의 보강용 유리섬유로서 내화학성 시험과 기계적 특성평가를 위한 인장강도를 측정하였다. 그 결과 석탄폐석을 사용한 E-glass fiber의 특성이 석탄폐석을 사용하지 않은 보통 E-glass 섬유에 비해 충분히 양호한 특성을 나타내어 E-glass 섬유용 원료로서 석탄폐석의 활용가능성을 확인할 수 있었다.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.249-253
• /
• 2010

A-자리 경함 perovskite $La_{1/3}NbO_3$ 단결정 시편을 제작하여 10~800 K 온도범위에서 유전특성을 조사하였다. 50 K와 650 K 부근에서 유전이상이 나타났으며, 고온영역(약 650 K)에서 유전상수의 thermal hysterisis가 크게 나타났다. 교류전도도 측정으로부터 560~690 K에서 입내 활성화 에너지는 0.43 eV로 가장 낮게 나타났다. 이들의 결과로부터 50 K 부근의 dielectric anomaly는 $Nb^{5+}$-이온의 antiparallel 변위에 기인한 것이며, 650 K 부근의 dielectric anomaly는 $La^{3+}$-이온의 재배열에 기인한 것으로 추측된다.

• 한국언어정보학회지:언어와정보
• /
• 제5권2호
• /
• pp.39-55
• /
• 2001

This paper investigates the idiosyncratic understanding of universal quantifiers such as every, each or all by young children at the ages of 4 to 7, and argues that the phenomenon is explicable in terms of the maturation of both the cognitive system and the linguistic system. Evidence for this dual explanation comes from the fact that the visual input, a picture, plays a key role in determining the children's conceptual representation, suggesting the need for the central integration of visual and linguistic elements; and from the fact that a quantifier in the linguistic input has an intrinsic property, i.e. a <+focus> feature. I have tried to explain the nature of the cognitive factors in terms of the function of the central system, suggesting a modified form of Smith & Tsimpli's (1995) yersion of Fodor's (1983) modularity hypothesis. The categorial status of the quantifier in the children's interpretation is considered, focusing on the movement of that quantifier out of its own extended projection to FP. It is claimed that children initially treat quantifiers as modifiers, rather than functional heads, and that the phenomenon of quantifier spreading by children can be attributed to delay in the development of the relevant functional category, i.e., DP (or QP), in language acquisition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.480-483
• /
• 2001

Epitaxial rutile-TiO$_2$ and anatase-TiO$_2$ films were grown at 80$0^{\circ}C$ on $Al_2$O$_3$ (1102) and LaAlO$_3$ (001), respectively, using pulsed laser deposition. The formation of different phases on different substrates could be qualitatively explained by the atomic arrangements at the interfaces. We also successfully deposited epitaxial rutile-TiO$_2$ and anatase-TiO$_2$ films on conductive RuO$_2$ and La$_{0.5}$Sr$_{0.5}$CoO$_3$ electrodes, respectively Using a Kelvin probe, we measured the photovoltaic properties of these multilayer structures. A rutile-TiO$_2$ film grown on RuO$_2$ showed a very broad peak in the visible light region. An epitaxial anatase-TiO$_2$ film grown on La$_{0.5}$Sr$_{0.5}$CoO$_3$ showed a strong peak with a threshold energy of 3.05 eV 3.05 eV

• 연구윤리
• /
• 제4권2호
• /
• pp.1-5
• /
• 2023

Purpose: There are already hundreds of millions of users of the Metaverse platform, and within a few years, it is expected to develop into a stage for new economic activities with huge industrial ripple effects due to the size of users. The purpose of this study is to derive considerations for the development of metaverse ethical guidelines. Research design, data, and methodology: The concept of the metaverse was examined through various opinions of industry and experts on the metaverse, and literature related to metaverse ethics was analyzed in the Korean journal database. Results: Six issues were identified through the existing research. (1) Establishing a unified definition of metaverse (2) Necessity of establishing ethical principles considering the operator (3) Personal information protection and privacy (4) Expression in a virtual environment (5) Copyright and intellectual property rights of creations (6) Virtual economy and fairness of trade. Conclusions: Metaverse ethics will be developed and implemented in a form and method different from the real world, but basically, continuous discussions on ethical rationality are needed in the process. In addition, since the ethical judgment in the metaverse environment accompanies cultural differences and epochal changes, it is necessary to focus on metaverse ethics cases.

• Journal of Information Technology Applications and Management
• /
• 제25권2호
• /
• pp.53-72
• /
• 2018

This empirical study explored characteristics that affect the usefulness of online reviews, in the China e-commerce platform, and implemented multiple regressions to find factors that significantly influence on product sales, ultimately. Till now, prior studies have continuously revealed what factor affects usefulness of online review or product sales, only in respective terms. The point of our study is that we built two-level regression models, thereby being able to comprehensively analyze these two different targets. Before plunging into running regressions, we carefully collected 192,764 online review data for 200 products extracted from the Jingdong, the second biggest e-commerce platform in China. Also, we gathered "review sentimental scores" variable from each review and used that one as a core variable in our regression model, thus we were able to implement both quantitative and qualitative research. The evidences from the two-level regression models showed that the extent to which a product is experience good positively affects both usefulness of a review and product sales, again the usefulness of a review contributes to product sales in sequence. Also, the property of experience good has interaction effect on both for two-level regression models. Our main findings highlight the importance of role of online review to business performance of e-commerce firms.