• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.57-66
• /
• 2013

Domestic PCB industry formed by orders of demand companies is extremely vulnerable in its innovation infrastructure including high value-added technology development and information exchange. The majority of PCB products produced in the country relies on the imports from abroad and it causes its vulnerability to external market changes. Due to the negative perceptions about the industry (e.g., 3D job), low treatment (especially SMEs) and expertise employment avoidance in PCB industry, the job market conditions of PCB industry is not so good. In these circumstances, the PCB industry is completely dependent on the demand market such as cellular phones, and tablet PC, and as a result the responsiveness of PCB industry to the changes in demand market is also vulnerable. In this PCB industry, Korean government is trying to build the research infrastructure for PCB industry that realizes the sharing of information among companiesthrough the operation of the PCB industry innovation forum (information innovation), builds SME suppot platform and supports quality improvement (technology innovation), and supports enterprise collaboration processes (material-process-equipment) utilizing PCM open laboratory. The PCB industry technology infratstructure project is going to be promoted by the government(1.3 billion won, each year) and the private investmen(434 million won each year) from 2013 to 2017(5 years project)(table 1). This study analyzes the feasibility of the project, by using the AHP analysis and the results shows that this project is considered feasible because the AHP overall score is evaluated as 0.841, the overall score is greater than or equal to 0.55.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.705-713
• /
• 2016

For the soft ground construction, the factors not considered in the design stage occurs in the construction stage so that they cause the increase of the construction cost due to the structural stability and the design change. The subject of the study is the construction section of the industrial complex access road made in the Ochang region of Chungcheongbuk-do. The study is concerned with selecting the soft ground handling method such as the replacement method using rock debris and the surcharge reflecting the service load as the soft ground handling measure and analyzing the effect of reducing the construction cost with the stability of structures and the reduction of the construction period. The soft ground in the study section consists of sandy and cohesive soil and is 2.4m to 5.5m deep. It is distributed unevenly between the 1.5m to 5.9m stratums under the ground surface. Settlement is not serious, but the future uneven settlement and difference are expected so that the future settlement behavior is estimated by analyzing the site measurement results after the soft ground treatment. Moreover, in consideration of the regional characteristics and economic efficiency, soil with good quality is replaced with rock debris as the replacement material so that 29% of the construction cost is reduced due to the increase of stability and the reduction of duration. If the estimation of the dispersion of the pore water pressure within the dam body and the change of the underground water level and the relation of the actually measured soft ground with consolidation is studied further on the basis of the study, it is expected that the behavior of the soft ground will be correctly estimated in various site conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1216-1221
• /
• 2012

This study is aimed to investigate microbiological contamination of Angelica gigas Nakai. A total of 111 samples including root, soil, and irrigation water were collected from farms and market to detect aerobic bacteria, Bacillus cereus, coliform, Escherichia coli, Listeria monocytogenes,. Salmonella spp., and Staphylococcus aureus. The contaminations of aerobic bacteria, coliform, and Bacillus cereus in the root during cultivation were found 6.71 log CFU $g^{-1}$, 4.13 log CFU $g^{-1}$, and 3.54 log CFU $g^{-1}$, respectively. The contamination of coliform and B. cereus were detected in all steps from harvesting to processing, with the highest count recorded from the cutting step. In marketing, the contaminations of aerobic bacterial, coliform, and B. cereus were 5.5~6.0 log CFU $g^{-1}$, 2.4~2.6 log CFU $g^{-1}$, and 3.5~4.0 log CFU $g^{-1}$, respectively. Listeria monocytogenes, Salmonella spp, and Staphylococcus aureus were not detected in any of samples. This result indicated that hygienic soil management and post harvest management should be performed to reduce the contamination of hazard microorganisms and to produce safe agro-products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.702-709
• /
• 2003

In this paper, we propose an efficient and QoS-aware MAC scheduling algorithm for Bluetooth, which considers both throughput and delay performance of each Master-Slave pair in scheduling decisions, and thus, attempts to maximize overall performance. The proposed algorithm, MTDPP (Modified Throughput-Delay Priority Policy), makes up for the drawbacks of T-D PP (Throughput-Delay Priority Policy) proposed in [6] and improves the performance. Since Bluetooth employs a master-driven TDD based scheduling algorithm, which is basically operated with the Round Robin policy, many slots may be wasted by POLL or NULL packets when there is no data waiting for transmission in queues. To overcome this link wastage problem, several algorithms have been proposed. Among them, queue state-based priority policy and low power mode-based algorithm can perform with high throughput and reasonable fairness. However, their performances may depend on traffic characteristics, i.e., static or dynamic, and they require additional computational and signaling overheads. In order to tackle such problems, we propose a new scheduling algorithm. Performance of our proposed algorithm is evaluated with respect to throughput and delay. Simulation results show that overall performances can be improved by selecting suitable parameters of our algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2027-2035
• /
• 2001

In this paper, we present an audio stream delivery using the AMR (Adaptive Multi-Rate) coder that was adopted by ETSI and 3GPP as a standard vocoder for next generation IMT-2000 service in which includes combined sender (FEC) and receiver reconstruction technique in the Internet. By use of the media-specific FEC scheme, the possibility to recover lost packets can be much increased due to the addition of repair data to a main data stream, by which the contents of lost packets can be recovered. The AMR codec is based on the code-excited linear predictive (CELP) coding model. So we use a frame erasure concealment for CELP-based coders. The proposed scheme is evaluated with ITU-T G.729 (CS-ACELP) coder and AMR - 12.2 kbit/s through the SNR (Signal to Noise Ratio) and the MOS (Mean Opinion Score) test. The proposed scheme provides 1.1 higher in Mean Opinion Score value and 5.61 dB higher than AMR - 12.2 kbit/s in terms of SNR in 10% packet loss, and maintains the communicab1e quality speech at frame erasure rates lop to 20%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.708-720
• /
• 1993

The new preventive control mechanisms for traffic management in BISDN/ATM networks can be divided into Connection Admission Control(CAC), Usage Parameter Control (UPC), and Priority Control. Of these mechanism, Usage Parameter Control continuously monitors the parameters admitted in the network's entry point to guarantee quality of service of connections already admitted. Upon detecting traffic that violates the negotiated parameter, it takes the necessary control measures to prevent congestion. Among these traffic control methods, this paper focuses on the Usage Parameter Control method, and proposes and designs GRACE-LB(Guaranteed Rate Acceptance & Control Element-using Leaky Bucket) which improves upon existing UPC models. GRACE-LB modifies the previous LB model by eliminating the cell buffer, dividing the token Pool into two pools, Long-term pool, Short-term pool, and changing the long-term token generating form using 'Cycle Token' into the same bursty form as the traffic source. Through this, GRACE-LB achieves effective control of the Average Bit Rate(ABR) and burst duration of bursty multimedia traffic which previous LB models found difficult to control. Also, since GRACE-LB can e implemented using only simple operations and there are no cell buffers in it, it has the merit of being easily installed at any place.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.6
• /
• pp.65-76
• /
• 2008

Since Cyber Home Learning is an e-learning system promoted with policy goals of reducing private tutoring costs, solving gaps among regions, and improving scholastic attainments, preceding researches to verify its effects have been developed of evaluation standards focused on achievement of its policy goals rather than educational goals. The evaluation standards suggested in preceding researches have limitations in clearly reviewing Cyber Home Learning's effects by teaching-learning activities factors and Cyber Home Learning's improvement related to teaching-learning activities. Therefore, an evaluation model capable of analyzing effects of Cyber Home Learning from pedagogical aspect is required. The goal of this paper is to design pedagogical evaluation model according to teaching-learning activities factors and analyze effects of Cyber Home Learning. For the goal, researches from Korea and abroad related to Cyber Home Learning have been examined, pedagogical evaluation model was designed according to teaching-learning activities factors, and the model was then experimented through survey and in-depth interview on students who used Cyber Home Learning. It is expected that results of this paper can be used as a basic data to improve quality of Cyber Home Learning service for teaching-learning activities, and will contribute to establishment of more developmental Cyber Home Learning policy in the future.

• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.108-122
• /
• 1986

Changing concepts of health care, are stimulating the demand for health care, thereby orienting society to health care rights to such an extent that they are deemed as fundamental ones inalienable to man. Concomitantly, qualitative as well as quantative improvement is being sought in the nursing service field. Today, efforts are being made in various areas, especially to qualitatively improve nursing services. A second issue concerns proper staffing. It is important to study staffing, in as much as it continues to be the most persistent and critical problem facing hospital nursing administrators today. It involves quantity, quality, and utilization of nursing personnel. A great deal of attention has been focused on this problem since mid 1930's when nursing services began to be felt as an important segment of hospital operation representing the largest single item of hospital budgets. Traditionally, the determination and allocation of nursing personnel resources has relied heavily on gloval approaches which make use of fixed staff-to-patient ratios. It has long been recognized that these ratios are insensitive to variations between institutions and among individual patients. Therefore, the aim of this thesis is to point to the urgent need for the development of methodology and criteria suited to the reality of Korea. The present research selected one place, the W Christian Hospital, and was conducted over a period 10 days from January, and nurses who were them on duty in their unit. The total num-her of patients surveyed was 1,426 and that of 354. The research represents many variables affecting the direct patient care time using the result from the direct observation method, then using a calculation method to estimate the relationship between the patients care time and selected variables in the hospital setting. The amount of direct patient care time varies with many factors, such 89 the patients age. diagnosis and time in hospital. Differences are also found from hospital, clinic to clinic, ward to ward, and even shift to shift. In this research, the calculation method of estimating the required member of nursing staff is obtained by dividing the time of productive patient care activity(with the time of patient care observed), by the sum of the productive time that each the staff can supply, i.e., 360 minutes, which is obtained by deducting the time for personal activities. The results indicate a substantial difference between the time of productive patient care observed directing and the time of the productive patient care estimated using calculating method. If we know accurately the time of the direct patient care on a shift, there required number of staff members calculated if the proper method can be determinded should be able the time of the direct patient care be estimated by the patient classification system, but this research has shown this system to be in accurate in Korea. There are differences in the recommended time of productive patient care and the required number of nursing staff depending upon which method is used. The calculated result is not very accurate, so more research is needed on the patient classification system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.146-170
• /
• 2017

Joint channel assignment and routing is a well-known problem in multi-radio wireless mesh networks for which optimal configurations is required to optimize the overall throughput and fairness. However, other objectives need to be considered in order to provide a high quality service to network users when it deployed with high traffic dynamic. In this paper, we propose a re-configuration optimization model that optimizes the network throughput in addition to reducing the disruption to the mesh clients' traffic due to the re-configuration process. In this multi-objective optimization model, four objective functions are proposed to be minimized namely maximum link-channel utilization, network average contention, channel re-assignment cost, and re-routing cost. The latter two objectives focus on reducing the re-configuration overhead. This is to reduce the amount of disrupted traffic due to the channel switching and path re-routing resulted from applying the new configuration. In order to adapt to traffic dynamics in the network which might be caused by many factors i.e. users' mobility, a centralized heuristic re-configuration algorithm called State-Aware Joint Routing and Channel Assignment (SA-JRCA) is proposed in this research based on our re-configuration model. The proposed algorithm re-assigns channels to radios and re-configures flows' routes with aim of achieving a tradeoff between maximizing the network throughput and minimizing the re-configuration overhead. The ns-2 simulator is used as simulation tool and various metrics are evaluated. These metrics include channel-link utilization, channel re-assignment cost, re-routing cost, throughput, and delay. Simulation results show the good performance of SA-JRCA in term of packet delivery ratio, aggregated throughput and re-configuration overhead. It also shows higher stability to the traffic variation in comparison with other compared algorithms which suffer from performance degradation when high traffic dynamics is applied.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.990-996
• /
• 2006

This research was conducted to evaluate the changes in allergenicity of shrimp by physical treatments using competitive indirect enzyme-linked immunosorbent assay (Ci-ELISA). Shrimp was subjected to physical treatments such as high hydrostatic pressure (HHP), sonication, autoclave and microwave. Heat-stable protein (HSP) purified from raw shrimp was used as a major allergen. The binding ability of monoclonal IgG and shrimp-allergic patients' IgE to HSP treated with HHP decreased, increasing the pressure up to 400 MPa. Especially, it became less than 50% at 400 MPa. The binding ability of mAb to HSP treated with sonication (10, 20, 30 and 60 min) decreased with the treated time. Especially, it became less than 60% with the treatment for 60 min. The allergenicity change of HSP treated with autoclave and microwave little decreased. The binding ability of mAb to HSP during the treatment for 20 min became more than 70%. The results suggest that allergenicity of HSP in raw shrimp be more easily lost by HHP or sonication treatment than by autoclave or microwave treatment.