• 한국게임학회 논문지
• /
• 제9권5호
• /
• pp.13-24
• /
• 2009

전문 스토리텔러들을 양성하기 위한 실무 스토리텔링론이 적극 연구되어야 한다. 최근에 디지털스토리텔링에 대한 관심이 높아지면서 게임스토리텔링의 이론적인 연구가 다양한 각도에서 이루어지고 있다. 그러나 정작 스토리텔러를 양성하기 위한 체계적인 게임 스토리텔링론은 이론적인 틀에 머물고 있으며, 실무적인 부분과 이론적인 부분의 융합은 아직도 미약하기 그지없는 상황이다. 본고에서는 실무적인 게임스토리텔링의 완성도를 높이기 위해, 게임의 내러티브를 구축해 주는 가장 핵심적인 4요소(인물, 사건, 세계관, 게임의 인터랙티브 요소)의 리스트를 작성해 보았다. 스토리텔러가 구상하는 창의적인 발상이 각 분야의 디자이너들에게 정확하게 전달될 수 있도록, 실무적인 측면에서 디테일한 정보리스트를 완성시켜보자는 것이 본 연구의 목표이다.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.860-865
• /
• 2010

When a circuit breaker is opened, a large capacitance around the buses, the circuit breaker and the potential transformer (PT) might cause PT ferroresonance. During PT ferroresonance, the iron core repeats saturation and unsaturation even though the supplied voltage is a rated voltage. This paper describes an analytical analysis of PT ferroresonance in the transient-state. To analyze ferroresonance analytically, the iron core is modelled by a simplified two-segment core model in this paper. Thus, a nonlinear ordinary differential equation (ODE) for the flux linkage is changed into a linear ODE with constant coefficients, which enables an analytical analysis. In this simplified model, each state, which is either saturated or unsaturated state, corresponds to one of the three modes, i.e. overdamping, critical damping and underdamping. The flux linkage and the voltage in each state are obtained analytically by solving the linear ODE with constant coefficients. The proposed transient analysis is effective in the more understanding of ferroresonance and thus can be used to design a ferroresonance prevention or suppression circuit of a PT.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.279-288
• /
• 2020

The computational post-buckling strength of the tilted sandwich composite shell structure is evaluated in this article. The computational responses are obtained using a mathematical model derived using the higher-order type of polynomial kinematic in association with the through-thickness stretching effect. Also, the sandwich deformation behaviour of the flexible soft-core sandwich structural model is expressed mathematically with the help of a generic nonlinear strain theory i.e. Green-Lagrange type strain-displacement relations. Subsequently, the model includes all of the nonlinear strain terms to account the actual deformation and discretized via displacement type of finite element. Further, the computer code is prepared (MATLAB environment) using the derived higher-order formulation in association with the direct iterative technique for the computation of temperature carrying capacity of the soft-core sandwich within the post-buckled regime. Further, the nonlinear finite element model has been tested to show its accuracy by solving a few numerical experimentations as same as the published example including the consistency behaviour. Lastly, the derived model is utilized to find the temperature load-carrying capacity under the influences of variable factors affecting the soft-core type sandwich structural design in the small (finite) strain and large deformation regime including the effect of tilt angle.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.345-355
• /
• 2019

Use of the reconstructed fuel assemblies from partially burnt nuclear fuel pins is analyzed. This reutilization option is a potential candidate technique to make better use of the nuclear resources. Standard two step method is used to calculate node i.e. fuel assembly average burnup and then pin by pin ${\eta}$ values are reconstructed to ascertain the residual reactivity in the used fuel pins. Fuel pins with ${\eta}$ > 1:0 are used to reconstruct to-be-reused fuel assemblies. These reconstructed fuel assemblies are burnt during the cycle 3, 4, 5 and 6 of a 1000 MW PWR core by replacing fresh, once burnt and twice burnt fuel assemblies of the reference core configurations. It is concluded that using reconstructed fuel assemblies for the fresh fuel affect dearly on the cycle length (>50 EFPD) when more than 16 fresh fuel assemblies are replaced. However, this loss is less than 20 days if the number of fresh fuel assemblies is less than eight. For the case of replacing twice burned fuel, cycle length could be increased slightly (10 days or so) provided burnt fuel pins from other reactors were also available. Reactor safety parameters, like axial off set (< ${\pm}10%$), Doppler temperature coefficient (<0), moderator temperature coefficient at HFP (<0) are always satisfied. Though, 2D and 3D pin peaking factors are satisfied (<1:55) and (<2:52) respectively, for the cases using eight or less reconstructed fuel assemblies only.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.7-10
• /
• 2006

Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

• Korean Journal of Radiology
• /
• 제23권2호
• /
• pp.280-288
• /
• 2022

Objective: To compare core needle biopsy (CNB) and repeat fine-needle aspiration (rFNA) to reduce the rate of diagnostic surgery and prevent unnecessary surgery in nodules initially diagnosed as atypia/follicular lesions of undetermined significance (AUS/FLUS). Materials and Methods: This study included 231 consecutive patients (150 female and 81 male; mean age ± standard deviation, 51.9 ± 11.7 years) with 235 thyroid nodules (≥ 1 cm) initially diagnosed as AUS/FLUS, who later underwent both rFNA and CNB. The nodules that required diagnostic surgery after the biopsy were defined using three different scenarios according to the rFNA and CNB results: criterion 1, surgery for low-risk indeterminate (categories I and III); criterion 2, surgery for high-risk indeterminate (categories IV and V); and criterion 3, surgery for all indeterminate nodules (categories I, III, IV, and V). We compared the expected rates of diagnostic surgery between CNB and rFNA in all 235 nodules using the three surgical criteria. In addition, the expected rates of unnecessary surgery (i.e., surgery for benign pathology) were compared in a subgroup of 182 nodules with available final diagnoses. Results: CNB showed significantly lower rates of nondiagnostic, AUS/FLUS, and suspicious for malignancy diagnoses (p ≤ 0.016) and higher rates of follicular neoplasm or suspicious for a follicular neoplasm (p < 0.001) and malignant diagnoses (p = 0.031). CNB showed a significantly lower expected rate of diagnostic surgery than rFNA for criterion 1 (29.8% vs. 48.1%, p < 0.001) and criterion 3 (46.4% vs. 55.3%, p = 0.029), and a significantly higher rate for criterion 2 (16.6% vs. 7.2%, p = 0.001). CNB showed a significantly lower expected rate of unnecessary surgery than rFNA for criterion 1 (18.7% vs. 29.7%, p = 0.024). Conclusion: CNB was superior to rFNA in reducing the rates of potential diagnostic surgery and unnecessary surgery for nodules initially diagnosed as AUS/FLUS in a scenario where nodules with low-risk indeterminate results (categories I and III) would undergo surgery.

• Advances in nano research
• /
• 제12권1호
• /
• pp.25-35
• /
• 2022

Within the framework of the density functional theory combined with the method of non-equilibrium Green's functions (DFT + NEGF), the features of electron transport in fullerene nanojunctions, which are «core-shell» nanoobjects made of a combination of fullerenes of different diameters C₂₀, C₈₀, C₁₈₀, placed between gold electrodes (in a nanogap), are studied. Their transmission spectra, the density of state, current-voltage characteristics and differential conductivity are determined. It was shown that in the energy range of -0.45-0.45 eV in the transmission spectrum of the "Au-C₁₈₀-Au" nanojunction appears a HOMO-LUMO gap with a width of 0.9 eV; when small-sized fullerenes C₂₀, C₈₀ are intercalation into the cavity C₁₈₀ the gap disappears, and a series of resonant structures are observed on their spectra. It has been established that distinct Coulomb steps appear on the current-voltage characteristics of the "Au-C₁₈₀-Au" nanojunction, but on the current-voltage characteristics "Au-C₈₀@C₁₈₀-Au", "Au-(C₂₀@C₈₀)@C₁₈₀-Au" these step structures are blurred due to a decrease in Coulomb energy. An increase in the number of Coulomb features on the dI/dV spectra of core-shell fullerene nanojunctions was revealed in comparison with nanojunctions based on fullerene C₆₀, which makes it possible to create high-speed single-electron devices on their basis. Models of single-electron transistors (SET) based on fullerene nanojunctions "Au-C₁₈₀-Au", "Au-C₈₀@C₁₈₀-Au" and "Au-(C₂₀@C₈₀)@C₁₈₀-Au" are considered. Their charge stability diagrams are analyzed and it is shown that SET based on C₈₀@C₁₈₀-, (C₂₀@C₈₀)@C₁₈₀- nanojunctions is output from the Coulomb blockade mode with the lowest drain-to-source voltage.

• Journal of East Asia Management
• /
• 제1권1호
• /
• pp.29-49
• /
• 2020

In an intensively competitive global market, small-and medium-sized firms are puzzled about how to develop sustainable competitive advantages against global rivalries, thus leading satisfactory economic performance. However, despite the roles and contributions of such small-and medium-sized firms in the local community and national economies in Japan, little guidance has been offered to the practical issues related to their strategic behaviors toward global management. To fill this notable knowledge gap, this study aims to investigate the conditions in which how Japanese small-and medium-sized could dominates global market, which is one of key challenges in the literature of small business and entrepreneurship. To obtain better insights to this research area, this study undertakes an in-depth interview survey with I.S.T (Industrial Summit Technology) Corporation that shows off the highest global market share (40 per cent) with seamless polyimide tube product widely used in office automation equipment (e.g., copiers and printers). This method of survey is designed to deeply understand historical considerations about how I.S.T Corporation could dominate in the global market of such seamless polyimide tube product. Based on findings drawn from an interview, this study identifies five major factors enabling I.S.T Corporation to be a competitive global hidden company: vision sharing through founder's entrepreneurship, core competence, strategic network, risk management, and employee engagement. Specifically, to become a global hidden champion, sharing the vision motivating employees to partake in shaping company's future will be the first step on the road to global success through founder's entrepreneurship. However, in order to achieve such a vision, the importance of company's core competence cannot be overemphasized, which differentiates your customer solution with those of competitors. As such, a group of experts will be naturally formed and demonstrates your expertise in the global market, thereby building sustainable competitiveness. On the other hand, to maintain sustainable competitiveness, it is necessary to make up for the weaknesses small-and medium-sized firms suffer from competitive resources while strengthening their own strengths through strategic networks with external organizations. Here, every company has to understand the critical role of risk management, which is essential in this process of being global company so as not to lose your own strengths. Last but not least, do not forget the significant effects of employee engagement in firm performance. To enhance employees' engagement, a company has to create an ideal organization culture which fits into company's history and personality. In doing so, such organization culture can allow the vision and strategy to be implemented into detailed business tactics while facilitating employees to challenge the status quo by experimenting with creative ideas.

• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.395-409
• /
• 2000

Parametric studies were performed to assess the sensitivity in determining the maximum in-vessel heat removal capability from the core material relocated into the lower plenum of the reactor pressure vessel (RPV）during a core melt accident. A fraction of the sensible heat can be removed during the molten jet delivery from the core to the lower plenum, while the remaining sensible heat and the decay heat can be transported by rather complex mechanisms of the counter-current flow limitation (CCFL) and the critical heat flux (CHF）through the irregular, hemispherical gap that may be formed between the freezing oxidic debris and the overheated metallic RPV wall. It is shown that under the pressurized condition of 10MPa with the sensible heat loss being 50% for the reactors considered in this study, i.e. TMI-2, KORI-2 like, YGN-3&4 like and KNGR like reactors, the heat removal through the gap cooling mechanism was capable of ensuring the RPV integrity as much as 30% to 40% of the total core mass was relocated to the lower plenum. The sensitivity analysis indicated that the cooling rate of debris coupled with the sensible heat loss was a significant factor The newly proposed heat removal capability map (HRCM) clearly displays the critical factors in estimating the maximum heat removal from the debris in the lower plenum. This map can be used as a first-principle engineering tool to assess the RPV thermal integrity during a core melt accident. The predictive model also provided ith a reasonable explanation for the non-failure of the test vessel in the LAVA experiments performed at the Korea Atomic Energy Research Institute (KAERI), which apparently indicated a cooling effect of water ingression through the debris-to-vessel gap and the intra-debris pores and crevices.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.216-222
• /
• 2022

The capacity of high nickel Li(Ni_xCo_yMn_1-x-y)O₂ (NCM, x ≥ 0.8) cathodes is known to rapidly decline, a serious problem that needs to be solved in a timely manner. It was reported that cathode materials with the {010} plane exposed toward the outside, i.e., a radial structure, can provide facile Li⁺ diffusion paths and stress buffer during repeated cycles. In addition, cathodes with a core-shell composition gradient are of great interest. For example, a stable surface structure can be achieved using relatively low nickel content on the surface. In this study, precursors of the high-nickel NCM were synthesized by coprecipitation in ambient atmosphere. Then, a transition metal solution for coprecipitation was replaced with a low nickel content and the coprecipitation reaction proceeded for the desired time. The electrochemical analysis of the core-shell cathode showed a capacity retention of 94 % after 100 cycles, compared to the initial discharge capacity of 184.74 mA h/g. The rate capability test also confirmed that the core-shell cathode had enhanced kinetics during charging and discharging at 1 A/g.