• Smart Structures and Systems
• /
• 제5권3호
• /
• pp.223-240
• /
• 2009

As in any engineering application, the problem of structural assessment should face the different uncertainties present in real world. The main source of uncertainty in Health Monitoring System (HMS) applications are those related to the sensor accuracy, the theoretical models and the variability in structural parameters and applied loads. In present work, two methodologies have been developed to deal with these uncertainties in order to adopt reliable decisions related to the presence of damage. A simple example, a steel beam analysis, is considered in order to establish a liable comparison between them. Also, such methodologies are used with a developed structural assessment algorithm that consists in a direct and consistent comparison between sensor data and numerical model results, both affected by uncertainty. Such algorithm is applied to a simple concrete laboratory beam, tested till rupture, to show it feasibility and operational process. From these applications several conclusions are derived with a high value, regarding the final objective of the work, which is the implementation of this algorithm within a HMS, developed and applied into a prototype structure.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.699-700
• /
• 2014

The use of Radio Frequency Identification technology (RFID) in medical context enables not only drug identification, but also a rapid and precise identification of patients, physicians, nurses or any other healthcare giver. The combination of RFID tag identification with structured and secured Internet of Things (IoT) solutions enables ubiquitous and easy access to medical related records, while providing control and security to all interactions. This paper defines a basic security architecture, easily deployable on mobile platforms, which would allow to establish and manage a medication prescription service in mobility context making use of electronic Personal Health Records. This security architecture is aimed to be used with a mobile e-health application (m-health) through a simple and intuitive interface, supported by RFID technology. This architecture, able to support secured and authenticated interactions, will enable an easy deployment of m-health applications. The special case of drug administration and ubiquitous medication control system, along with the corresponding Internet of Things context, is presented.

• 한국학교보건학회지
• /
• 제16권1호
• /
• pp.37-54
• /
• 2003

Recent domestic findings indicate steep increase of geriatric diseases such as obesity, diabetes, and high blood pressure among children and adolescents. It is, therefore, necessary to establish a new system for constitution inspection that reflects domestic adolescents' health conditions by the introduction of feasible items and systematic methods in the inspect ion. The objective of this study is to grasp the problems and to present proper ways of improving the system. As the method of the research during the period from September 2001 to March 2002 we refer to the domestic and foreign literature, and ask the advice of the specialists in pediatrics, family medicine, endocrine, cardiology. As on-site research we us e survey of nationwide elementary, middle, and high schools, visit representative local schools and have an interview with school nurses. Through the interview we try to find practical problems of school heath care and find proper method of students physic al examination. The abstract of the problems of student examination system is as following. To the question about the extent of the result of physical examination 46. 46.4%(school doctor) and 42.6%(parents and students) of the respondents answered "don't know". It means neglectfulness about examination itself. 62% of the school nurses responded "unsatisfactory" people who take charge of practical affairs have complaint about pre sent examination method. Because of the short time of the examination, and numerous students, the examination was incomplete. Several questions, method of physical examination, content of physical examination and list of physical examination, were raised. Reform measures for physical examination system of students were presented by physician, school nurses, students and parents of student.

• 동서간호학연구지
• /
• 제18권1호
• /
• pp.25-30
• /
• 2012

Purpose: The purpose of this study was to verify the influence of health point system on the lifestyle among the patients with chronic diseases listed in iCDMS, a project of the Incheon Metropolitan Center for Chronic Disease Control and Prevention. Methods: The data were collected 1,000 persons among the patients listed in iCDMS from March 16, 2009 to December 21, 2010 by telephone survey. The data were analyzed by descriptive statistics, ${\chi}^2$-test, odds ratio and logistic regression with the SPSS 18.0 program. Results: The higher the percentage of the accumulation of the points of necessary medical examinations they have, the better the lifestyle the participants practice moderation in drinking, exercise, and diet (p<.05). Also the higher the percentage e accumulative points of education and visit, the stronger the intention to improve the lifestyle such as for example, receiving the guidance of no smoking, giving up drinking, or being conscious of nutrition and obesity (p<.05). Conclusion: This study suggests that the motivation through an incentive system can increase self-care make an effect on the care of patients with chronic diseases.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.607-621
• /
• 2015

Wireless sensor technology has been opened up numerous opportunities to advanced health and maintenance monitoring of civil infrastructure. Compare to the traditional tactics, it offers a better way of providing relevant information regarding the condition of building structure health at a lower price. Numerous domestic buildings, especially longer-span buildings have a low frequency response and challenging to measure using deployed numbers of sensors. The way the sensor nodes are connected plays an important role in providing the signals with required strengths. Out of many topologies, the dense and sparse topologies wireless sensor network were extensively used in sensor network applications for collecting health information. However, it is still unclear which topology is better for obtaining health information in terms of greatest components, node's size and degree. Theoretical and computational issues arising in the selection of the optimum topology sensor network for estimating coverage area with sensor placement in building structural monitoring are addressed. This work is an attempt to fill this gap in high-rise building structural health monitoring application. The result shows that, the sparse topology sensor network provides better performance compared with the dense topology network and would be a good choice for monitoring high-rise building structural health damage.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.203-207
• /
• 2009

The purpose of this study was to examine differences between male and female in blood oxygen saturation due to 93% oxygen administration of the three levels (1L/min, 3L/min, 5L/min). Ten healthy male ($25.0{\pm}1.8$ years) and ten female ($23.7{\pm}1.9$ years) college students were selected as the subjects for this study. The experiment consisted of three runs, i.e., the three levels of 93% oxygen administration, respectively. The each run consisted of three phases, i.e., Rest 1 (5 min), Hyperoxia (10 min), and Rest 2 (5 min). Blood oxygen saturation were measured throughout the three phases. By increasing the supply rate of highly concentrated oxygen, rising rate of blood oxygen saturation was increased. Blood oxygen saturation of female was higher than male regardless of supply rate of highly concentrated oxygen and phases.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.66-71
• /
• 2017

The autoignition temperature (AIT) is crucial combustible characteristics which need attention in chemical process that handle hazardous materials. The AIT, also to as minimum spontaneous ignition temperature(MSIT), is the lowest temperature of a hot surface at which the substance will spontaneously ignite without any obvious sources of ignition such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for process safety. This study measured the AITs of n-propanol+acetic acid system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-propanol and acetic acid which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-propanol+acetic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation). In the case of n-propanol and acetic acid system, the minimum autoignition temperature behavior (MAITB), which is lower than the lower AIT, is shown among the two pure substances constituting the mixture.

• 대한치과기공학회지
• /
• 제33권3호
• /
• pp.203-210
• /
• 2011

Purpose: The purpose of this study was to compare color correspondence of different sizes of Vita Mark II$^{(R)}$ and TriLuxe$^{(R)}$ Feldspar blocks. Methods: The three commercially available shades(1M2, 2M2, 3M2) of Mark II & TriLuxe blocks for the CEREC$^{(R)}$ CAD/CAM system were examined. For each of three colors, three different sizes were tested, 5 blocks each. The measurements were made using a spectrophotometer equipped with an integrating sphere using the CIE $L^*$, $a^*$, $b^*$ colorimetric system. Results: The $L^*$, $a^*$, $b^*$ value of Vita Mark II$^{(R)}$ ceramic block showed significantly higher than TriLuxe$^{(R)}$ ceramic block(p<0.05). In comparing the Vita Mark II$^{(R)}$ specimen of the three different shade, color differences between materials(${\Delta}E^*$) showed the lowest value of 2.09, and the highest was 2.24. ${\Delta}E^*$ values of the materials of Vita Mark II$^{(R)}$ were higher than 2. As the size of ceramic block differed, the color correspondence of Vita Mark II$^{(R)}$ showed statistically significant difference but, this result is clinically acceptable. Conclusion: All the different sizes of the different shades of Vita TriLuxe$^{(R)}$ blocks for the CEREC$^{(R)}$ system showed the high degree of color correspondence necessary in industrially prefabricated CAD/CAM blocks. The results of the present study suggested that it would be necessary to establish the reproducible and constant color specification system for an esthetic restoration.

• 한국동물위생학회지
• /
• 제35권4호
• /
• pp.313-319
• /
• 2012

Consumer's preference and microbial inspections on fresh raw beef were carried out to understand the actual market status in Gwanju, Korea. Over 15 questions on questionnaire by 1,111 randomly selected respondents between April and May in 2011, results showed 65.5% positive on eating fresh raw beef, 63.8% negative on good hygiene condition of fresh raw beef, and 72.5% positive on the secure of the hygiene-safety for priority program, respectively. For microbial inspections, a total of 302 samples were collected from fresh raw beef purchased from slaughterhouse (n=122), transport (n=69) and consumer (n=81) stage, from lettuce (n=30) at consumer stage. The aerobic plate count (APC), E. coli count and food borne bacteria such as Salmonella spp., Listeria monocytogenes, Staphylococcus(S.) aureus and E. coli O157:H7 were tested in the samples. As results, the level of count on APC of fresh raw beef ranged $6{\times}10^1{\sim}1.8{\times}10^5CFU/g$ from slaughterhouse, $2{\times}10^2{\sim}8.3{\times}10^5CFU/g$ from transport stage and $1{\times}10^2{\sim}4{\times}10^5CFU/g$ from consumer stage. The level of count on E. coli of fresh raw beef ranged $1{\sim}9{\times}10^1CFU/g$ from slaughterhouse, $1{\sim}7{\times}10CFU/g$ from transport stage and $1{\sim}5.5{\times}10CFU/g$ from consumer stage. In total, 26 S. aureus were isolated, 10 (14.5%) from fresh raw beef at transport stage, 12 (14.8%) from fresh raw beef and 4 (13.3%) from lettuce at consumer stage. Enterotoxin of S. aureus was not detected among 26 isolates. All S. aureus isolates were typed using a DiversiLab$^{TM}$ rep-PCR system for genetic similarity test, showing over 95% of genetic relationship amon isolates.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.10.1-10.10
• /
• 2023

The purpose of this paper was to review the problems relating to Korea's occupational health services and suggest ways to improve them. Korea can be classified as a welfare state type of conservative corporatism partially interwoven with liberalism. While experiencing compressed economic growth, the economic sectors of developed (excess areas) and developing (deficient areas) countries are interwoven. Therefore, it is necessary to perfect conservative corporatism along with a complementary reinforcement of liberal contents and to apply a multilayered approach focusing on complementing the deficient areas. It is essential to form a national representative indicator related to occupational health, and a strategy for selection and concentration is needed. The proposed central indicator is the occupational health coverage rate (OHCR), which is the number of workers who have applied for mandatory occupational health services under the Occupational Safety and Health Act in the numerator with the total working population in the denominator. This paper proposes ways to raise the OHCR, which is currently at the level of 25%-40%, to 70%-80%, which is the level of Japan, Germany, and France. To achieve this target, it is necessary to focus on small businesses and vulnerable workers. This is an area of market failure and requires the active input of community-oriented public resources. For access to larger workplaces, the marketability of services should be strengthened and personal intervention using digital health resources should be actively attempted. Taking a national perspective, work environment improvement committees with tripartite (labor, management, and government) participation for improvement of the working environment need to be established at the center and in the regions. Through this, prevention funds linked to industrial accident compensation and prevention could be used efficiently. A national chemical substance management system must be established to monitor the health of workers and the general public.