• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.109-120
• /
• 2018

The distributional characteristics of fault segments in Cretaceous and Tertiary rocks from southeastern Gyeongsang Basin were derived. The 267 sets of fault segments showing linear type were extracted from the curved fault lines delineated on the regional geological map. First, the directional angle(${\theta}$)-length(L) chart for the whole fault segments was made. From the related chart, the general d istribution pattern of fault segments was derived. The distribution curve in the chart was divided into four sections according to its overall shape. NNE, NNW and WNW directions, corresponding to the peaks of the above sections, indicate those of the Yangsan, Ulsan and Gaeum fault systems. The fault segment population show near symmetrical distribution with respect to $N19^{\circ}E$ direction corresponding to the maximum peak. Second, the directional angle-frequency(N), mean length(Lm), total length(Lt) and density(${\rho}$) chart was made. From the related chart, whole domain of the above chart was divided into 19 domains in terms of the phases of the distribution curve. The directions corresponding to the peaks of the above domains suggest the directions of representative stresses acted on rock body. Third, the length-cumulative frequency graphs for the 18 sub-populations were made. From the related chart, the value of exponent(${\lambda}$) increase in the clockwise direction($N10{\sim}20^{\circ}E{\rightarrow}N50{\sim}60^{\circ}E$) and counterclockwise direction ($N10{\sim}20^{\circ}W{\rightarrow}N50{\sim}60^{\circ}W$). On the other hand, the width of distribution of lengths and mean length decrease. The chart for the above sub-populations having mutually different evolution characteristics, reveals a cross section of evolutionary process. Fourth, the general distribution chart for the 18 graphs was made. From the related chart, the above graphs were classified into five groups(A~E) according to the distribution area. The lengths of fault segments increase in order of group E ($N80{\sim}90^{\circ}E{\cdot}N70{\sim}80^{\circ}E{\cdot}N80{\sim}90^{\circ}W{\cdot}N50{\sim}60^{\circ}W{\cdot}N30{\sim}40^{\circ}W{\cdot}N40{\sim}50^{\circ}W$) < D ($N70{\sim}80^{\circ}W{\cdot}N60{\sim}70^{\circ}W{\cdot}N60{\sim}70^{\circ}E{\cdot}N50{\sim}60^{\circ}E{\cdot}N40{\sim}50^{\circ}E{\cdot}N0{\sim}10^{\circ}W$) < C ($N20{\sim}30^{\circ}W{\cdot}N10{\sim}20^{\circ}W$) < B ($N0{\sim}10^{\circ}E{\cdot}N30{\sim}40^{\circ}E$) < A ($N20{\sim}30^{\circ}E{\cdot}N10{\sim}20^{\circ}E$). Especially the forms of graph gradually transition from a uniform distribution to an exponential one. Lastly, the values of the six parameters for fault-segment length were divided into five groups. Among the six parameters, mean length and length of the longest fault segment decrease in the order of group III ($N10^{\circ}W{\sim}N20^{\circ}E$) > IV ($N20{\sim}60^{\circ}E$) > II ($N10{\sim}60^{\circ}W$) > I ($N60{\sim}90^{\circ}W$) > V ($N60{\sim}90^{\circ}E$). Frequency, longest length, total length, mean length and density of fault segments, belonging to group V, show the lowest values. The above order of arrangement among five groups suggests the interrelationship with the relative formation ages of fault segments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2007

This paper aims to provide information to generate a statistical load model of an educational server by analyzing workload of an e-Learning sewer at Dankook University. The result of the analysis shows file size distribution, access frequency and transmission volume for each file type, access interval, changes in preference and clients access rate by networks. In particular, it had different results from previous studies about video file's size distribution and file distribution based on access frequency. This is because the characteristics of e-learning are influenced by using authoring tools for making into video file and by freeing the number of students who register for a course. The result in this paper can be used as a basic data for studies designed to improve e-learning system architecture and server performance.

• Journal of Species Research
• /
• v.8 no.4
• /
• pp.407-420
• /
• 2019

Short-palped crane flies belonging to the genus Epiphragma Osten Sacken, 1860 (Diptera: Limoniidae: Limnophilinae) have a worldwide distribution except the Afrotropics, with the highest diversity in Neotropics and Oriental Region. They are divided into four subgenera: Eupolyphragma Alexander, 1948, Epiphragma s. str., Lipophragma Alexander, 1978, and Parepiphragma Alexander, 1960. Diagnostic characters and wing photographs of all subgenera are given. Genus Epiphragma was previously unknown from the Korean Peninsula. Species Epiphragma (Epiphragma) gracilistylus Alexander, 1933 is newly recorded for North Korea, E. (E.) subfascipenne Alexander, 1920 is newly recorded for South and North Korea, and E. (E.) subinsigne Alexander, 1920 is newly recorded for South Korea. These species are taxonomically revised, and the taxonomic status of E. (E.) gracilistylus is discussed. We present an identification key and redescriptions and illustrations of both sexes from all species in Korea. Redescription of larva and pupa of E.(E.) subfascipenne is presented. Elevation range, period of activity, habitat information, general distribution, and a distribution map in Korean Peninsula is given for each species.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1259-1268
• /
• 1995

The stress distribution around micro holes and the behavior of stress interaction between micro holes are considerd in the study. Several conclusions are extracted as follows : (1) The stress interaction varies with the distance e between micro holes. When the two micro holes are spaced in such a manner that theri two closest points are separated by a distance of micro hole radius (e=1), stress distribution is affected by a opposite micro hole in all the closest region. In addition, if two closest points are seperated by twice the distance of a micro hole radius (e=2), stress distribution is affected by a opposite micro hole in the region of -0.8.leq.x/r.leq.0.8 and the interaction effect can be neglected for e=4. (2)If the depth becomes larger than the radius, or the radius varies, the shape and magnitude of stress distribution around micro holes varies. (3) Hoop stress around a micro hole for the two dimensional configuration is larger than that of the three dimensional micro hole located on the surface of material for .theta. < 60.deg., but it is reversed for .theta > 60.deg.

• Journal of Korean Society on Water Environment
• /
• v.39 no.5
• /
• pp.396-412
• /
• 2023

Species from the mayfly genus Ephemera (Order Ephemeroptera) was assessed for their physical microhabitat suitability (namely E. strigata, E. separigata, and E. orientalis-sachalinensis). Probability distribution models (Exponential, Normal, Lognormal, Logistic, Weibull, Gamma, Beta, and Gumbel) based on the data collected from 23,957 sampling units of 6,787 sites in Korea from 2010 to 2021 were used. Mode and standard deviation calculated from the best-fitting models to species distribution along a water depth gradient were 265 cm and 159 cm in E. orientalis-sachalinensis; 10 cm and 83 cm in E. strigata; 20 cm and 15 cm in E. separigata, respectively. The current velocity gradient was 22 cm/s and 40 cm/s in E. orientalis-sachalinensis; 60 cm/s and 53 cm/s in E. strigata; 82 cm/s and 25 cm/s in E. separigata, respectively. The mean diameter (phi scale) of substrate grains were -3.6 and 2.2 in E. orientalis-sachalinensis; -7.4 and 1.5 in E. strigata; -5.8 and 0.9 in E. separigata, respectively. Habitat suitability range of E. orientalis-sachalinensis was estimated to be 161~369 cm (water depth), 5~44 cm/s (current velocity), -5.2~-2.0 (mean diameter); 3~34 cm (water depth), 36~94 cm/s (current velocity), -8.1~-6.3 (mean diameter) for E. strigata; 12~32 cm (water depth), 63~96 cm/s (current velocity), -6.3~-5.2 (mean diameter) for E. separigata. In relative comparison, E. orientalis-sachalinensis was estimated to be rheophobic, eurybathophilic, and eurypsephophilic; E. strigata to be euryrheophilic, bathophobic, and lithophilic; E. separigata to be stenomesorheophilic, stenobathophobic, stenolithophilic.

• Journal of Distribution Science
• /
• v.20 no.5
• /
• pp.13-22
• /
• 2022

Purpose: This study aimed to identify factors affecting attitudes and intentions toward online purchasing of millennials and gen z in Indonesia by considering distribution capabilities factors. Research design, data and methodology: This study used a non-probability sampling technique. The questionnaire was distributed through an online platform and obtained 225 respondents. The data acquired from the respondents used SPSS 23 and AMOSS 21 to process the Structural Equation Model (SEM). Results: The results of this study stated that attitudes and intentions toward online purchases were influenced by delivery speed and trust. The results also stated that the perception of web quality positively influenced trust. On the other hand, shipping tracking, people's importance to consumers, and online reviews had no significant effects on online purchasing attitudes. Conclusions: This research has made an essential contribution to increasing and expanding our understanding of factors that affect attitudes and intentions toward online shopping in a developing market, Indonesia. From a practical perspective, this research examined the integrated consumer model of millennials and Gen Z online shopping in Indonesia that considers distribution capability, trust, and perceived website quality factors. Therefore, e-commerce business actors can design e-marketing strategies and programs to achieve the company's long-term goals.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.528-530
• /
• 2000

This paper presents a database for extraction of area load characteristics. The database is constructed by the acquired load data, the items of transformer and customers in KEPCO. The acquired load data is acquired from sample distribution transformer that selected as a sample. Finally, we present the daily, weekly and monthly load characteristics of commercial and residential are extracted as using database.

• Journal of Distribution Science
• /
• v.22 no.1
• /
• pp.79-94
• /
• 2024

Purpose: The popularity of social media has altered how customers interact with businesses, and an increasing number of customers prefer to voice their complaints on social media. Bystanders can observe the customer complaint process on social media, but the impact of transparency on bystanders remains uncertain. Therefore, this study established and verified a model for defining the effect of transparency and service recovery types on bystanders. Research Design and Methodology: In this study, we used the internet survey platform "So Jump" to collect data. And we validated three studies with SPSS 26.0 and Smart PLS 4.0. Result: First, we showed that the transparency process (vs. result) is more likely to increase customer forgiveness and E-loyalty and reduce E-NWOM intention among bystanders. Second, customer forgiveness also plays a complementary mediating role between transparency and E-loyalty, as well as between transparency and E-NWOM intention. Finally, we found a modest interaction effect between transparency (process vs. result) and service recovery types (psychological vs. tangible vs. hybrid) on bystanders' customer forgiveness and E-loyalty. Conclusions: This study provides actionable recommendations for how service managers can effectively employ social media as a means for distributing feedback information to manage service recovery in the future.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2002.09a
• /
• pp.1-16
• /
• 2002

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.347-357
• /
• 2011

In this paper, we propose an approximation to the overshoot in M/$E_n$/1 queues. Overshoot means the size of excess over the threshold when the workload process of an M/$E_n$/1 queue exceeds a prespecified threshold. The distribution, $1^{st}$ and $2^{nd}$ moments of overshoot have an important role in solving some kind of optimization problems. For the approximation to the overshoot, we propose a formula that is a convex sum of the service time distribution and an exponential distribution. We also do a numerical study to check how exactly the proposed formula approximates the overshoot.