• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.127-135
• /
• 2012

This paper introduced the flow forecast modeling system that a water management agency in west central Florida, Tampa Bay Water has been operated to forecast monthly rainfall and streamflow in the Tampa Bay region, Florida. We evaluated current 1-year monthly rainfall forecasts and flow forecasts and actual observations to investigate the benefits of incorporating rainfall forecasts into monthly flow forecast. Results for rainfall forecasts showed that the observed annual cycle of monthly rainfall was accurately reproduced by the $50^{th}$ percentile of forecasts. While observed monthly rainfall was within the $25^{th}$ and $75^{th}$ percentile of forecasts for most months, several outliers were found during the dry months especially in the dry year of 2007. The flow forecast results for the three streamflow stations (HRD, MB, and BS) indicated that while the 90 % confidence interval mostly covers the observed monthly streamflow, the $50^{th}$ percentile forecast generally overestimated observed streamflow. Especially for HRD station, observed streamflow was reproduced within $5^{th}$ and $25^{th}$ percentile of forecasts while monthly rainfall observations closely followed the $50^{th}$ percentile of rainfall forecasts. This was due to the historical variability at the station was significantly high and it resulted in a wide range of forecasts. Additionally, it was found that the forecasts for each station tend to converge after several months as the influence of the initial condition diminished. The forecast period to converge to simulation bounds was estimated by comparing the forecast results for 2006 and 2007. We found that initial conditions have influence on forecasts during the first 4-6 months, indicating that FMS forecasts should be updated at least every 4-6 months. That is, knowledge of initial condition (i.e., monthly flow observation in the last-recent month) provided no foreknowledge of the flows after 4-6 months of simulation. Based on the experimental flow forecasts using the observed rainfall data, we found that the 90 % confidence interval band for flow predictions was significantly reduced for all stations. This result evidently shows that accurate short-term rainfall forecasts could reduce the range of streamflow forecasts and improve forecast skill compared to employing the stochastic rainfall forecasts. We expect that the framework employed in this study using available observations could be used to investigate the applicability of existing hydrological and water management modeling system for use of stateof-the-art climate forecasts.

• Journal of Distribution Science
• /
• v.9 no.4
• /
• pp.43-50
• /
• 2011

Concerning the risk factors of the outbreak of a fire in a traditional market, most of those markets are located in downtown areas or residential areas; thus, although their location may be favorable in terms of marketability, they face a potential risk in that a fire may develop into a large blaze owing to poor environment or the absence of facilities prepared for disaster during a fire. Moreover, as many people are densely poised in the markets, it is very probable that a fire may occur owing to the excessive use of heaters in the winter as well as the reckless use of electric and gas facilities. It seems that traditional markets encounter difficulty being insured against fire, because of their vulnerability and that the vast majority of small-scale sellers are likely to suffer mental anguish and tremendous physical injury in case of a fire. However, most of those sellers in the traditional markets are hand-to-mouth sellers, and they lack awareness of safety concerns and have insufficient experience in safe facility management. As small-scale sellers constitute the majority in the traditional market, the subscription rate of fire insurance in most of the traditional markets is low for the reasons of their needy circumstances and their financial burden. Statistically, the subscription by street vendors is non-existent; therefore, these vendors have a fairly limited access to indemnification after fire damage. Because of these problems, this study's purpose is to identify the current level of insurance subscription by these markets, which are exposed to poor facilities and vulnerability to fire. In order to fix this, it appears that shop owners and consumers will have to band together. For this study, we executed a fire policyholder fact-finding mission at traditional markets with approximately 108 and 981 stores. The research method was executed by an investigation using one-on-one individual interviews using a questionnaire. The contents investigated current insurance subscriptions. The method of analysis looked at the difference of insured amount according to volume size through cross-tabulation of the difference of insured amount by possession form, difference of insured amount by market form, difference of insured amount by category of business, difference of insured amount by market size, etc. Furthermore, the study should be used to propose solutions for problems through theoretical review with the use of a literature research, because the field case study was through interviews with the persons concerned, and the survey of the current insurance subscriptions by traditional market shopkeepers. The traditional market would generally have difficulty affording fire insurance. Fire insurance subscription rates of most of the market proved to be inactive, because of the economic burden of payment. Lack of funds is thought to be the main factor that causes a lack of realization about the necessity of fire insurance. In addition to expensive insurance premiums, sometimes, the companies' valuation of the businesses is lower than their actual valuations, and they do not pay out enough during a claim. The research presents an improvement plan that, when presented at the traditional markets, may strengthen their ability to procure fire insurance through the help of the central government. Researchers connected with the traditional market mainly accomplish the initial research. However, although this research has its limitations, it offers considerable benefits. For future researchers, I would suggest looking at several regions for comparison.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.87-96
• /
• 2003

The purposes of this study were to find out the optimum intensity of magnetic field where magnetism could promote the activity of osteoblast, and to discover the possibility of clinical application in the areas of dental implants and bone grafts by confirming the effect of clinically increasing bone formation. In this experiment, we used the Neodymium magnet, which had magnetic power six times as strong as the current ones and enabled the resistances against the demagnetization up to 20 to 50 times to be minimized with the size of 1mm in sight. In order to culture cells, a specially designed device was used. It was made to adjust the distance and accordingly to control the intensity of the magnetic field, by placing the cell culture plate in the center with a magnet of 1mm long and thick installed on the both ends. Using MC3T3-E1 cell, a kind of osteoblast-like cell, we cultured, for 24 hours, not only the test group which had been cultured under the magnetic fields with different intensity of 5, 10, 50, 100, 500, and 1000 Gauss, but also the control group excluding the influences of the magnetic field. After observing the cell's form and the density of the culture medium through an inverted microscope, we made a series of proceedings needed for the immunofluoroscence staining, such as fixation, normal serum reaction, primary antibody reaction, and secondary antibody reaction. And with a fluorescence microscope, we observed those-above and compared the frequency of expression of IFG-1 receptor. To make a Western immunoblotting analysis, the cells cultured under the same condition as the above had the procedure of the lysis buffer and the acrylamide gel electrophoresis was carried out. Protein transferred into the nitrocellulose membrane and tested on the primary and the secondary antibody reactions was observed and compared. The results were as follows: When observed through an inverted microscope, the nuclear divisions of the cells under the magnetic field of 10 Gauss were the most active, and the density of the cells could be observed the most enormously. As the result of an immunofluoroscence staining of IGF-1 receptor, the expression of IFG-1 was the most frequently observed under the magnetic field of 10 Gauss. On the other hand, few differences of consideration were made between the test group cultured under the magnetic fields of 5, 500, and 1000 Gauss and the control group. In respect of the expression of IFG-1 receptor, the test group cultured under the magnetic fields of 50 and 100 Gauss were higher than the control group, and lower than that cultured under the magnetic field of 10 Gauss.(p<0.05) According to the Western immunoblotting analysis, the band of IFG-1 receptor which had 85KDa of molecular weight was the darkest. Judging from the above-mentioned results, the growth factor receptor of an osteoblast cell which was an important criterion for the bone formation was increased in maximum under the magnetic field of 10 Gauss. Moreover it was observed that the optimum intensity of magnetic field in which magnetism made the activity of the osteoblast cell increase was about 10 Gauss.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.75-86
• /
• 2008

Many kinds of environment friendly agricultural materials (EFAMs) were used for the plant protection, furthermore they support the growth of crops in the greenhouses and the kindly environment friendly farming. Natural enemies might be used for control of insect pest with EFAMs at the same space and time. For testing the toxicity of EFAMs against to natural enemies, 10 EFAMs were selected and tested in small greenhouses and farm's fields. In case of Harmonia axyridis larva, there was no predacious activity against cotton aphids in the block with EFAMMo L, EFAMPE D, EFAMME G and EFAMAE A, otherwise, aphid population was rapidly decreased in the control block without EFAMs. Both of Trialeurodes vaporariorum and Encarsia formosa population were slightly decreased in the block with EFAMs. There were significantly decreased in the block with IEFAM C, FEFAM D, EFAMSM Band EFAMPE D compared with control area. Especially, there was significantly maintained a very low population, both T. vaporariorum and E. formosa in the block with EFAMMo C. The parasitized ratio of Aphidius colemani is also very low in the block with EFAMs compared with control area. In the block with IEFAM C, FEFAM D, EFAMPE D and EFAMMo L, there were significantly different with control area in the number of mummies. Otherwise, in case of Diglyphus isaea and Liriomyza trifolii, there was no significantly different between blocks with and without EFAMs. In the block with EFAMMo C, Tetranychus urticae and Phytoseiulus persimilis populations were significantly maintained a very low level. However, the population of T. urticae was increased, but P. persimilis was decreased in the block with EFAMMo L.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.49-81
• /
• 2007

Research in the IS (Information Systems) outsourcing has focused on the importance of legal contracts and partnerships between vendors and clients. Without detailed legal contracts, there is no guarantee that an outsourcing vendor would not indulge in self-serving behavior. In addition, partnerships can supplement legal contracts in managing the relationship between clients and vendors legal contracts by itself cannot deal with all the complexity and ambiguity involved with IS outsourcing relationships. In this paper, we introduce a psychological contract (between client and vendor) as an important variable for IS outsourcing success. A psychological contract refers to individual's mental beliefs about his or her mutual obligations in a contractual relationship (Rousseau, 1995). A psychological contract emerges when one party believes that a promise of future returns has been made, a contribution has been given, and thus, an obligation has been created to provide future benefits (Rousseau, 1989). An employmentpsychological contract, which is a widespread concept in psychology, refers to employer and employee expectations of the employment relationship, i.e. mutual obligations, values, expectations and aspirations that operate over and above the formal contract of employment (Smithson and Lewis, 2003). Similar to the psychological contract between an employer and employee, IS outsourcing involves a contract and a set of mutual obligations between client and vendor (Ho et al., 2003). Given the lack of prior research on psychological contracts in the IS outsourcing context, we extend such studies and give insights through investigating the role of psychological contracts between client and vendor. Psychological contract theory offers highly relevant and sound theoretical lens for studying IS outsourcing management because of its six distinctive principles: (1) it focuses on mutual (rather than one-sided) obligations between contractual parties, (2) it's more comprehensive than the concept of legal contract, (3) it's an individual-level construct, (4) it changes over time, (5) it affects organizational behaviors, and (6) it's susceptible to organizational factors (Koh et al., 2004; Rousseau, 1996; Coyle-Shapiro, 2000). The aim of this paper is to put the concept, psychological contract commitment (PCC), under the spotlight, by finding out its mediating effects between legal contracts/partnerships and IS outsourcing success. Our interest is in the psychological contract commitment (PCC) or commitment to psychological contracts, which is the extent to which a partner consistently and deeply concerns with what the counter-party believes as obligations during the IS project. The basic premise for the hypothesized relationship between PCC and success is that for outsourcing success, client and vendor should continually commit to mutual obligations in which both parties believe, rather than to only explicit obligations. The psychological contract commitment playsa pivotal role in evaluating a counter-party because it reflects what one party really expects from the other. If one party consistently shows high commitment to psychological contracts, the other party would evaluate it positively. This will increase positive reciprocation efforts of the other party, thus leading to successful outsourcing outcomes (McNeeley and Meglino, 1994). We have used matched sample data for this research. We have collected three responses from each set of a client and a vendor firm: a project manager of the client firm, a project member from the vendor firm with whom the project manager cooperated, and an end-user of the client company who actually used the outsourced information systems. Special caution was given to the data collection process to avoid any bias in responses. We first sent three types of questionnaires (A, Band C) to each project manager of the client firm, asking him/her to answer the first type of questionnaires (A).

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.79-87
• /
• 2007

An evaluation of the influence of nutritional health camp for in obese elementary students was assessed. Anthropometric measurement, 24-hour recall of dietary intake, MMTIC(Murphy-Meisgeier Type Indicator for Children) and questionnaire response(nutritional knowledge, nutritional attitude, and self-satisfaction) was documented in 43 obese elementary students(29 boys and 14 girls). The mean age of the elementary students was 11.2 years. The mean height, body weight and obesity index was 144.7 cm, 55.4 kg and 41.0% in boys, and 136.1 cm, 45.2 kg, 40.0% in girls. The mean energy intake was 1,522.4 kcal in boys and 1,494.9 kcal in girls. The subjects taking less than estimated average requirement(EAR) for vitamin ${B_2}$, folate, vitamin C and calcium was over 70%. A considerable number of students(65.1%) showed U band(undetermined character). The students demonstrated a propensity towards increased average nutritional knowledge and self-satisfaction after attending the nutritional health camp. In addition, a significant increase in average nutritional attitude was observed(p<0.001). The results of this study suggest that nutritional health camp positively influenced the nutritional attitude of elementary students.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.35-41
• /
• 2003

The study was conducted to develope a rapid method for the detection of Yersinia enterocolitica in spring water and vegetables via multiplex polymerase chain reaction (PCR) technique using ail, yst, uirF and subgenus-specific Y16S primers. Specificity and sensitivity of multiplex PCR and application of best primers for the detection of Y. enterocolitica from spring water and vegetables were investigeted. Y. enterocolitica ATCC 27729 strains gave 356 bP and 200 bp (Y16S) and 134 bp (yst) bands. but Y. enterocolitica ATCC 9610 and ATCC 23715 strains gave 200 bp and 134 bp bands.In the meanwhile, non-pathogenic Yersinia species, such as Y. frederikseni, Y. inter-media, Y. kristenseni and Y. pseudotuberculosis gave only single 200 bp band, and other bacteria including Escherichia coli O157:H7 ATCC 25392, Shigella dysenteri. Staphylococcu aureus ATCC 25923 and Listeria mo-nocytogenes ATCC 19111 did not show any bands. Among primers, yst and Y16S primer showed the best sensitivity. Seven CFU/mL Y. enterocolitica cells could be detected with yst and Y16S primers and the sensitivity was significantly improved by the further 2nd PCR after 38 cycles of first PCR amplication. Spring water, cabbage and mushroom were inoculated with Y. enterocolitica to determine the sensitivity of multiplex-PCR for the rapid detection of Y. enterocolitica. Multiplex-PCR assay could detect 7 or 70 cells in spring water and vegetables using whole cell lysate with repeating PCR amplication.

• Journal of Korean Theatre Studies Association
• /
• no.49
• /
• pp.5-47
• /
• 2013

Among the styles of performing arts, perhaps the genre that has attracted the largest audience would be musical. Popularity of musical has brought diverse changes in our performing arts market, and, upon emerging another musical genre, called 'Korean Traditional Musical Comedy,' it has been well-received by the audiences. 'Korean Traditional Musical Comedy' is a word that are formed by merging two other terms such as 'Korean Traditional Music' and 'Musical (Comedy).' In the meantime, however, it has yet some problems in order to be defined as the genre that has concrete concepts. It is because the term such as Korean Traditional Musical Comedy was created being closely associated with a marketing purpose rather than a term that defines the characteristics of a genre of performing arts. Although this new musical genre has drawn attentions of many audiences by adding 'Musical Comedy' to 'Korean Traditional Music' that was not quite popular to the public, it still does not have any established forms so that there is a fine line between "Korean Traditional Musical Comedy" and another genre like traditional style folk opera ("Changgeuk"). Looking at the characteristics of the musical work called 'Korean Traditional Musical Comedy, in general, first of all, it is a performance where music and drama are played. Here, the distinctive characteristic of this musical is that 'Korean Traditional Music' is sung. And the kinds of Korean traditional musics being sung are mainly Pansori (dramatic story-singing) and folk-songs, and, in most cases, Korean traditional musical instruments are being used as accompanying music. In this paper, the researcher investigated the aspects of experiment centering around Korean Musical Group, Taroo. These days, various experiments has been repeated not only for the works of Taroo but other musical work presently called 'Korean Traditional Musical Comedy' also. Having encompassed overall performance factors including use of musical instruments, dance, acting, materials for drama as well as music in drama, the researcher has gone through experiments repeatedly. Meanwhile, however, the subject matters that make 'Korean Traditional Musical Comedy' mostly attractive to the audiences are music and songs or sounds. ["Sori" also called "Chang" (唱)] Particularly, under the current situation of our musicals, the role of "Sori" is extremely important. The factor that plays absolutely most important role in acceptance and transformation of "Sori" is the created Pansori. Since the created Pansori is composed with new rhythmic patterns and new narrative poems, it tells the present story. Also it draws good responses from the audiences owing to easy conveyance of dialogues. And, its new style brings diversification to organization of musical instruments, so then this leads to the arrangements of music for Korean traditional music instruments, as well as instrumental music ensemble, orchestra, and jazz band, etc. Likewise, upon appearing creative musics in 'Korean Traditional Musical Comedy,' professional music and vocal compositions have begun to emerge naturally. And, the song specialist and writer, of course, staffs including direction, lighting, and sounds, etc are required. That is, professional composition method are forced to be introduced to all areas. Other than this, there are many music pieces which are based on our unique songs and sounds ("Sori") and such traditional factors as use of lead singer for ceremony or chorus, and the method that puts weight on Pansori. Accordingly many things accomplished. However, it is required that 'Korean Traditional Musical Comedy' go through numerous discussions and more experiments. Above all, the most important things are the role of actor and actress, and their changes, and training of actor and actress further. Good news is there are good audience responses. 'Korean Traditional Musical Comedy' is an open genre. As musicals are divided into several domains according to the characteristics thereof, 'Korean Traditional Musical Comedy' will be able to show its distinctive features in various styles according to embodiment.