• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.499-503
• /
• 2003

This paper we study the exact controllability for the nonlinear fuzzy control system in $E_N^n$by using the concept of fuzzy number of dimension n whose values are normal, convex, upper semicontinuous and compactly supported surface in $E_N^n$

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.564-576
• /
• 2017

${\cdot}$ GaN E-HEMT provides superior performance vs. Si MOSFET or IGBT, and also superior performance vs. SiC, below ~1200V ${\cdot}$ GaN E-HEMT is replacing Si MOSFET and IGBT in major application segments, and Industry Adoption will accelerate ${\cdot}$ Technology advances in GaN E-HEMT have made high-current true Normally-Off devices available in current ranges from 7A to 250A ${\cdot}$ While GaN has improved Properties vs. SiC or Si, different types of GaN devices offer different levels of performance or robustness ${\cdot}$ JEDEC Industrial-Grade Qualification of GaN E-HEMTs has been achieved, and Automotive Qualification is in progress.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.2
• /
• pp.1-14
• /
• 1990

The Radio Navigation System(R. N. S.) has been progressed consistantly with the development of electric-electronic engineering techniques since the R. D. E had been developed in 1910. The R. N. S. mostly depends on either Hyperbolic Navigation System(H. N. S.) or Spherical Navigation System(S. N. S.) in the ocean, and on Rectangular Navigation System (R. N. S.) in the air near the airport or an a combinations of the above systems in both area. Another effective R. N. S may be the Ellipse-Hyperbola Navigation System(E-H N. S.), which is proposed and named such in this paper. The equations calculating GDOP are derived and the GDOP values are calculated in the case of H. N. S., S. N. S, and E-H. N. S., respectively, for the specified case that four transmitting stations are arranged on the apex of a square, Then the GDOP diagrams of above navigation systems are presented for qualitative comparison in this paper. To measure the distances from the receiver to the stations in S. N. S., and/or the sum of distances to two stations in E-H N. S., the time synchronization between the transmitter clocks and the receiver clock is a major premise. The author has proposed the algorithm for getting this synchronmization utilizing the by S. N. S. or E-H N. S while GDOPs of those are relatively good. Even though clock synchronization error is a voidable due to the fix error used, the simulated results shows that the position accuracy of S. N. S. and E-H N. S. by the proposed method is far upgraded compared with that determined by H. N. S. directly, as far as the outer region of transmitter arrangement is concerned.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.1
• /
• pp.211-218
• /
• 2007

Nonlinear ARMA model $X_n\;=\;h(X_{n-1},{\cdots},X_{n-p},e_{n-1},{\cdots},e_{n-p})+e_n$ is considered and easy-to-check sufficient condition for strict stationarity of {$X_n$} without some irreducibility or continuity assumption is given. Threshold ARMA(p, q) and momentum threshold ARMA(p, q) models are examined as special cases.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.100-100
• /
• 2016

물리기상증착방법 (Physical vapor deposition)에 의하여 합성된 천이금속 질화물 박막은 경도, 내마모성 등 절삭공구의 성능을 향상시키며, Ti-Al-N, Ti-Zr-N, Zr-Al-N, Cr-Si-N 등의 3원계 경질 박막에 대한 연구가 지속적으로 이루어지고 있다. 이중에서도 CrAlN 코팅은 높은 경도, 낮은 표면 조도 등의 우수한 기계적 특성 이외에 고온에서 안정한 합금상 형성으로 인하여 우수한 내열성을 보유하여 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구사용 환경의 가혹화로 인하여 코팅의 내마모성 및 내열성 등의 물성 향상을 통한 공구의 수명 향상이 필요시 되고 있으며, 코팅에 적합한 중간층을 합성함으로써 공구 코팅으로의 적용 가능성을 높이는 연구들이 진행되고 있다. 본 연구에서는 CrAlN 코팅의 물성을 향상시키기 위해 CrAlN 코팅과 WC-Co 6wt.% 모재 사이에 CrN, CrZrN, CrN/CrZrSiN 등의 다양한 중간층을 합성하였으며, 중간층을 포함한 모든 코팅의 두께는 $3{\mu}m$ 로 제어하였다. 합성된 코팅의 미세조직, 경도 및 탄성계수, 내모성을 분석하기 위해 field emission scanning electron microscopy(FE-SEM), nano-indentation, ball-on-disk 마모시험기 및 ${\alpha}-step$을 사용하였다. 코팅의 내열성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 500, 600, 700, 800, 900, $1,000^{\circ}C$로 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였다. CrAlN 코팅을 나노 인덴테이션으로 분석한 결과, 모든 코팅의 경도(35.5-36.2 GPa)와 탄성계수(424.3-429.2 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, 코팅의 마찰계수는 중간층의 종류에 따라 다른 값을 보였으며, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅의 마찰계수는 0.34로 CrZrN 중간층을 증착한 CrAlN 코팅의 마찰계수(0.41)에 비해 낮은 값을 보였다. 또한, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아, CrN/CrZrSiN 중간층을 합성한 CrAlN 코팅의 내마모성이 상대적으로 우수한 것으로 판단된다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio 는 각각 0.076, 0.083 으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 모든 코팅을 열처리 후 경도 분석결과, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었고, 이는 CrZrSiN 중간층 내에 존재하는 $SiN_x$ 비정질상의 우수한 내산화성에 의한 결과로 판단된다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.347-357
• /
• 2011

In this paper, we propose an approximation to the overshoot in M/$E_n$/1 queues. Overshoot means the size of excess over the threshold when the workload process of an M/$E_n$/1 queue exceeds a prespecified threshold. The distribution, $1^{st}$ and $2^{nd}$ moments of overshoot have an important role in solving some kind of optimization problems. For the approximation to the overshoot, we propose a formula that is a convex sum of the service time distribution and an exponential distribution. We also do a numerical study to check how exactly the proposed formula approximates the overshoot.

• The Journal of Dong Guk Oriental Medicine
• /
• v.8 no.2
• /
• pp.175-199
• /
• 2000

Acupuncture and moxibustion play an important role not only in the medical service and health care of Korea, China and japan but also in those of many western countries such as Germany, France, United States of America. An unexpected results induced by careless acupuncture and moxibustion treatments may be mild or severe, and are due to practitioner's mistake and particular body condition of a patient. This study was performed to establish a preventive measures against medical accident induced by acupuncture therapy. Total 23 acupuncture points which are included in a J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ were selected as prohibited acupuncture points. Although the records in J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ are an important data historically which show dangerous acupuncture points, there are few a full investigation on J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ up to the present. So present study was done for literature review to understand a feasibility of the records in J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ in association with dangerous acupuncture points. Based upon the locations of these acupuncture points, the dangerous region were classified three categories, head, soma and limb. And abnormal signs related to the improperly performed acupuncture treatment on each point were investigated by using historical reference books on acupuncture and moxibustion. And then names, locations, depth of insertion, operation methods and side effects of each point were investigated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.380-389
• /
• 2005

The Goldschmidt iterative algorithm for a floating point divide calculates it by performing a fixed number of multiplications. In this paper, a variable latency Goldschmidt's divide algorithm is proposed, that performs multiplications a variable number of times until the error becomes smaller than a given value. To calculate a floating point divide '$\frac{N}{F}$', multifly '$T=\frac{1}{F}+e_t$' to the denominator and the nominator, then it becomes ’$\frac{TN}{TF}=\frac{N_0}{F_0}$'. And the algorithm repeats the following operations: ’$R_i=(2-e_r-F_i),\;N_{i+1}=N_i{\ast}R_i,\;F_{i+1}=F_i{\ast}R_i$, i$\in${0,1,...n-1}'. The bits to the right of p fractional bits in intermediate multiplication results are truncated, and this truncation error is less than ‘$e_r=2^{-p}$'. The value of p is 29 for the single precision floating point, and 59 for the double precision floating point. Let ’$F_i=1+e_i$', there is $F_{i+1}=1-e_{i+1},\;e_{i+1}',\;where\;e_{i+1}, If '$[F_i-1]<2^{\frac{-p+3}{2}}$ is true, ’$e_{i+1}<16e_r$' is less than the smallest number which is representable by floating point number. So, ‘$N_{i+1}$ is approximate to ‘$\frac{N}{F}$'. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation is derived from many reciprocal tables ($T=\frac{1}{F}+e_t$) with varying sizes. 1'he superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a divider. Also, it can be used to construct optimized approximate reciprocal tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.4-4
• /
• 2017

Atmospheric carbon dioxide enrichment ($eCO_2$) often increases soil nitrous oxide ($N_2O$) emissions, but the underlying mechanisms are not fully understood. Emerging evidence suggests that $eCO_2$ alters plant N preference in favor of ammonium ($NH_4{^+}-N$) over nitrate ($NO_3{^-}-N$). Yet, whether and how this attributes to the enhancement of $N_2O$ emissions has not been investigated. We examined the effects of $eCO_2$ on soil $N_2O$ emissions in the presence of two N forms ($NH_4{^+}-N$ or $NO_3{^-}-N$), using wheat (Triticum aestivum L.) as a model plant. Our results showed that N forms dominated $eCO_2$ effects on plant and microbial N utilization, and thus soil $N_2O$ emissions. Elevated $CO_2$ significantly increased the rate and the sum of $N_2O$ emissions by three to four folds when $NO_3{^-}-N$, but not $NH_4{^+}-N$, was supplied. Enhanced $N_2O$ emission was related to the reduced plant $NO_3{^-}-N$ uptake in wheat. We propose a new conceptual model in which $eCO_2$-inhibition of plant $NO_3{^-}-N$ uptake and/or $CO_2$-enhancement of soil labile C enhances the N and/or C availability for denitrifiers and increases the intensity and/or the duration of $N_2O$ emissions. Together, these findings suggest that to enhance plant N use efficiency and reduce $N_2O$ emission, crop breeding and management need to consider altered plant preference of N sources under future $CO_2$ scenarios.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.188-197
• /
• 2006

Fiber reinforced composite (FRC) is usually used as a connector joining a few teeth into one unit in orthodontics. However, fracture often occurs during the two to three years of the orthodontic treatment period due to repeated occlusal loading or water sorption in the oral environment. We simulated the repair by overlapping and attaching portions of two FRC strips in the middle and performed a three-point bending test to investigate the changes of the repair strength among the different FRC groups. The specimens were grouped according to the overlapping lengths of the two FRC strips, which were 1, 2, 3 and 4 mm (group E1, E2, E3 and E4, respectively) and the control group consisted of unrepaired, intact FRC strips. Each group consisted of 6 specimens and were cured with a light emitting diode curing unit. Group E4 showed the highest maximum loads of 2.67 N, then the control group (2.39 N), group E3 (2.35 N), E2 (2.10 N), and E1 (1.75 N) in decreasing order. Group E4 also showed the highest stiffness, which was 2.32 N/mm, however, the stiffness of group E3 (2.06N/mm) was higher than that of the control group (1.88 N/mm). According to the visual examination, the specimens tended to be bent rather than being fractured into two pieces with an increased length of overlapping portions. The above results suggest that a minimum overlapping length of 3 mm was necessary to obtain an adequate repair of a 10 mm length of FRC connector. In addition, the critical section adjacent to the joint area, where the thickness decreased abruptly, should be reinforced with flowable resin to minimize the bending tendency.