• 제목/요약/키워드: Dynamic-elastic deformation

검색결과 243건 처리시간 0.021초

비행 환경에 따른 극초음속 비행체의 구조 건전성에 관한 연구 (A Study on the Structural Integrity of Hypersonic Vehicles According to Flight Conditions)

  • 강연철;김규빈;김정호;조진연;김헌주
    • 한국항공우주학회지
    • /
    • 제47권10호
    • /
    • pp.695-704
    • /
    • 2019
  • 극초음속 비행체의 경우 고속으로 이동하는 유체와 구조물 표면사이의 마찰에 의해 공력 가열현상이 발생하며, 이로 인해 구조물의 강성이 저하되고 열 변형이 발생하게 된다. 이러한 물리적인 현상들은 비행체의 열공탄성학적인 불안정성을 초래할 수 있으며, 이와 더불어 구조물의 열적 안전성 감소시킬 수 있다. 이에 본 연구에서는 비행고도/비행시간/마하수를 변화시켜가며 공력열탄성학적 연계해석을 수행하고, 해석된 결과를 이용하여 구조물의 열적 안전성과 동적 안정성에 대해 고찰을 하였다. 구조물의 동적 안전성을 판별하기 위해 계산된 변위와 자동회귀이동평균 기법을 이용하였으며, 내열 안전성은 계산된 온도와 구조물의 녹는점을 비교를 통해 판별을 하였다. 이를 통해 극초음속 비행체의 구조 건전성을 확보하기 위한 설계 방향을 제시하였다.

Finite element analysis for the seismic performance of steel frame-tube structures with replaceable shear links

  • Lian, Ming;Zhang, Hao;Cheng, Qianqian;Su, Mingzhou
    • Steel and Composite Structures
    • /
    • 제30권4호
    • /
    • pp.365-382
    • /
    • 2019
  • In steel frame-tube structures (SFTSs) the application of flexural beam is not suitable for the beam with span-to-depth ratio lower than five because the plastic hinges at beam-ends can not be developed properly. This can lead to lower ductility and energy dissipation capacity of the SFTS. To address this problem, a replaceable shear link, acting as a ductile fuse at the mid length of deep beams, is proposed. SFTS with replaceable shear links (SFTS-RSLs) dissipate seismic energy through shear deformation of the link. In order to evaluate this proposal, buildings were designed to compare the seismic performance of SFTS-RSLs and SFTSs. Several sub-structures were selected from the design buildings and finite element models (FEMs) were established to study their hysteretic behavior. Static pushover and dynamic analyses were undertaken in comparing seismic performance of the FEMs for each building. The results indicated that the SFTS-RSL and SFTS had similar initial lateral stiffness. Compared with SFTS, SFTS-RSL had lower yield strength and maximum strength, but higher ductility and energy dissipation capacity. During earthquakes, SFTS-RSL had lower interstory drift, maximum base shear force and story shear force compared with the SFTS. Placing a shear link at the beam mid-span did not increase shear lag effects for the structure. The SFTS-RSL concentrates plasticity on the shear link. Other structural components remain elastic during seismic loading. It is expected that the SFTS-RSL will be a reliable dual resistant system. It offers the benefit of being able to repair the structure by replacing damaged shear links after earthquakes.

Geometrically nonlinear thermo-mechanical analysis of graphene-reinforced moving polymer nanoplates

  • Esmaeilzadeh, Mostafa;Golmakani, Mohammad Esmaeil;Kadkhodayan, Mehran;Amoozgar, Mohammadreza;Bodaghi, Mahdi
    • Advances in nano research
    • /
    • 제10권2호
    • /
    • pp.151-163
    • /
    • 2021
  • The main target of this study is to investigate nonlinear transient responses of moving polymer nano-size plates fortified by means of Graphene Platelets (GPLs) and resting on a Winkler-Pasternak foundation under a transverse pressure force and a temperature variation. Two graphene spreading forms dispersed through the plate thickness are studied, and the Halpin-Tsai micro-mechanics model is used to obtain the effective Young's modulus. Furthermore, the rule of mixture is employed to calculate the effective mass density and Poisson's ratio. In accordance with the first order shear deformation and von Karman theory for nonlinear systems, the kinematic equations are derived, and then nonlocal strain gradient scheme is used to reflect the effects of nonlocal and strain gradient parameters on small-size objects. Afterwards, a combined approach, kinetic dynamic relaxation method accompanied by Newmark technique, is hired for solving the time-varying equation sets, and Fortran program is developed to generate the numerical results. The accuracy of the current model is verified by comparative studies with available results in the literature. Finally, a parametric study is carried out to explore the effects of GPL's weight fractions and dispersion patterns, edge conditions, softening and hardening factors, the temperature change, the velocity of moving nanoplate and elastic foundation stiffness on the dynamic response of the structure. The result illustrates that the effects of nonlocality and strain gradient parameters are more remarkable in the higher magnitudes of the nanoplate speed.

흐름과 임의반사율을 갖는 부분중복파와의 공존장하에서 해저지반내 동적응답의 해석해 (An Analytical Solution of Dynamic Responses for Seabed under Coexisting Fields of Flow and Partial Standing Wave with Arbitrary Reflection Ratio)

  • 이광호;김동욱;강기천;김도삼;김태형;나승민
    • 한국지반공학회논문집
    • /
    • 제31권6호
    • /
    • pp.27-44
    • /
    • 2015
  • 일정수심상에서 임의반사율을 갖는 부분중복파와 흐름이 공존하는 경우 얕은 두께를 포함한 유한두께 및 무한두께의 해저지반내에서 동적응답을 나타내는 해석해를 유도한다. 해석해에서 반사율이 0인 경우는 진행파와 흐름과의 공존장으로, 반사율이 1인 경우는 완전중복파와 흐름과의 공존장으로 간단히 변환된다. Biot의 압밀이론에 기초하여 해저지반은 투과탄성매체로, 간극유체는 압축성으로, 그리고 지반내 간극수의 흐름은 Darcy법칙으로 각각 가정된다. 도출된 해석해는 기존의 해석결과와의 비교 검토로부터 검증되며, 실제 계산에서는 반사율, 흐름속도, 입사파의 주기 및 지반두께 등의 변화에 따른 지반변위, 간극수압, 유효응력 및 전단응력의 변동특성을 면밀히 검토한다. 이로부터 흐름이 존재하는 경우 흐름으로 인한 입사파와 반사파의 주기 및 파장의 변화로 인하여 흐름이 없는 경우의 지반내 동적응답과는 큰 차이를 나타내며, 또한 반사율의 크기에 따라 동적응답에서 큰 차이가 나타난다는 것을 확인할 수 있다.

디스크 받침에 의한 철도 판형교의 고유진동수 및 동적 거동 변화 (Variation of Natural Frequency and Dynamic Behavior of Railway Open-Steel-Plate-Girder Bridge with Installing Disk Bearings)

  • 최은수;이희업;김성일;김이현
    • 한국강구조학회 논문집
    • /
    • 제18권4호
    • /
    • pp.437-446
    • /
    • 2006
  • 철도판형교는 한국철도 교량에서 약 40%를 차지하고 있는 중요교량 형식중의 하나이다. 그러나 판형교의 대표적인 교량받침은선받침으로 거동 및 유지관리에 상당한 문제들을 발생시키고 있다. 이러한 문제를 해결하기 위한 방안연구의 일환으로 본 연구에서는 판형교의 실교량을 선정하여 선받침을 폴리우레탄 디스크 받침으로 교체하였다. 폴리우레탄 디스크 받침은 탄성받침의 일종으로 폴리우레탄 패드를 사용하여 탄성을 구현한다. 철도 판형교에 이와 같이 탄성받침을 설치하는 경우 실교량의 동특성의 변화 및 동적 거동의 변화를 디젤기관차 재하실험 및 운행차량에 의한 거동 계측을 통해서 분석 평가하였다. 탄성받침에 의해서 판형교의 1차모드 고유진동수가 3% 감소하였으며, 2차 및 3차모드의 고유진동수는 7 및 15% 감소하였다. 디스크 받침에 의해서 판형교의 동적 수직 처짐은 증가하였으나, 디스크의 변형을 제거한 교량의 순수 변형에 의한 처짐은 거의 증가하지 않는다. 교축직각방향의 변위는 디스크 받침의 전단핀 역할에 의해서 감소하는 경향을 보였다. 또한, 수평방향의 가속도도 탄성 받침에 의해서 거의 변화가 없었다.

Dynamic Electromyography Analysis of Shoulder Muscles for One-handed Manual Material Handling

  • Mo, Seung-Min;Jung, Myung-Chul
    • 대한인간공학회지
    • /
    • 제34권4호
    • /
    • pp.313-326
    • /
    • 2015
  • Objective: The objective of this research is to quantitatively analyze muscle activities of arm and shoulder, according to direction in various types of one-handed manual material handling, based on surface electromyography. Background: Workers in industrial sites frequently carry out one-handed manual material handling using arm and shoulder muscles. Therefore, chronic load and accumulated fatigue occur to arm and shoulder muscles, which becomes a main cause of upper arm and shoulder musculoskeletal disorders. The shoulder muscles have widely range of motion, and complex interactions take place among various muscles including rotator cuff muscles. In this regard, research on interactions among should muscles, according to such various dynamic motions, is required. Method: Ten male subjects in their 20s participated in this research. This research considered upward, downward, leftward, rightward, forward and backward directions and fourteen muscles around arm and shoulder (biceps brachii and trapezius, etc.) as independent variables. The mean muscle activity was set as the dependent variable. This research extracted $4^{th}{\sim}7^{th}$ repetition signals according to ten times of repetitive muscle contraction, and analyzed the muscle activity concerned using the envelope detection technique. Results: The mean muscle activity of upward direction was analyzed highly statistically significant. The reason is that the effect of gravity works to arm and shoulder muscles. Also, it is conjectured that deformation of coracoacromial ligament was caused, and its contact pressure increased, due mainly to the shoulder flexion, and therefore load was analyzed high. Muscle activity was analyzed significantly low, according to concentric ballistic motion used in the concentric contraction phase by storing elastic energy in the eccentric contraction phase with a motion to bring the weight to the front of subject's body as to downward, leftward and backward directions. Because, elbow joint's flexion-extension motions mainly occurred, biceps brachii was analyzed high muscle activity as the prime mover. Conclusion: The information on the quantitative load of muscles can be applied to ergonomic work design for one-handed manual material handling to minimize muscle load. Application: This research has effectively identified muscle activity according to dynamic contraction by applying an envelope detection technique. The results can be used for ergonomic work design to minimize muscle load during the one-handed manual material handling, according to each direction. The research results are expected to be used for musculoskeletal disorder prevention and physiotherapy in the rehabilitation medical field, based on the muscle load of arm and shoulder in various directions.

흐름과 완전중복파와의 공존장하에서 해저지반내 동적응답의 해석해 (An Analytical Solution of Dynamic Responses for Seabed under Flow and Standing Wave Coexisting Fields)

  • 이광호;김동욱;김도삼;김태형;김규한;전종혁
    • 한국해안·해양공학회논문집
    • /
    • 제27권2호
    • /
    • pp.118-134
    • /
    • 2015
  • 일정수심상에서 완전중복파와 흐름이 공존하는 경우 얕은 두께를 포함하는 유한두께 및 무한두께의 해저 지반내에서 동적응답을 나타내는 해석해를 유도한다. 이 때, Biot의 압밀이론에 기초하여 해저지반은 투과탄성매체로, 간극유체는 압축성으로, 그리고 지반내 간극수의 흐름은 Darcy법칙으로 각각 가정된다. 도출된 해석해는 기존의 해석결과와의 비교 검토로부터 검증되며, 실제 계산에서는 흐름속도, 입사파의 주기 및 지반두께 등의 변화에 따른 지반변위, 간극수압, 유효응력 및 전단응력의 변동특성을 면밀히 검토한다. 이로부터 흐름이 존재하는 경우 흐름으로 인한 입사파와 반사파의 주기 및 파장의 변화로 인하여 흐름이 없는 경우의 지반응답과는 많은 차이를 나타낸다는 것을 확인할 수 있다.

PSC I형 거더 실물 모형체 실험을 통한 동적거동특성 분석의 실용적 모델링 기법 연구 (The study of a practical modeling method for the analysis of dynamic behavior by the mockup test of prestressed concrete girder)

  • 김형규;장일영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권6호
    • /
    • pp.148-156
    • /
    • 2018
  • 교량 구조물 거동의 건전성 평가는 하중재하-처짐의 정적특성과 충격계수와 고유진동수 등의 동적특성으로 평가하는 것이 일반적이며, 이를 수치해석적 방법으로 비교 분석하는 것이 합리적인 방법이라 할 수 있다. 사용하중에 대한 거동은 탄성영역에서 이루어지므로 실물구조체와 수치해석의 결과는 일체성을 보이지만, 동적특성의 경우 특히, 진동학적 분석에 있어서는 구조물의 기하형상과 사용재료의 이질성에 기인하여 실물 구조체의 결과와 다소 차이를 보인다. 이러한 오차를 수렴시키기 위하여 본 연구는 실물 모형체의 실험결과를 바탕으로 다양한 수치해석적 모델을 제시하고 그 예민도를 분석함으로써, 교량 구조물 평가를 위한 실용적인 모델링 기법을 도출하여 안정적인 예비 해석 결과를 제공하는데 그 목적이 있다. 프리스트레스트 콘크리트 구조물의 긴장재를 환산단면으로 치환한 모델을 기반으로 긴장재의 탄성적 특성을 반영한 모델과 수정된 탄성계수를 적용한 모델의 고유진동수가 실물 모형체의 그것과 가장 유사한 결과를 얻을 수 있었다.

유연한 경동맥 분지관에서 분지각이 혈액의 유동에 미치는 영향에 관한 연구 (Effect of Bifurcation Angle on Blood Flow in Flexible Carotid Artery)

  • 이상훈;최형권;유정열
    • 대한기계학회논문집B
    • /
    • 제37권3호
    • /
    • pp.229-235
    • /
    • 2013
  • 유연한 혈관벽을 가진 경동맥 분지관을 흐르는 혈액의 유동을 해석하기 위하여 비정상상태, 비압축성, 뉴턴 유체를 가정한 3차원 유한요소해석을 수행하였다. 유체영역은 P2P1 유한요소를 사용하였으며, 격자의 움직임을 모사하기 위하여 arbitrary Lagrangian-Eulerian 기법을 적용하였다. Newmark 관계식을 이용하여 고체영역의 선형탄성 방정식의 변수들을 속도에 관한 방정식으로 간략화하였으며, 유체와 고체의 운동에 관하여 완전 결합된 공식을 얻었다. 맥동의 한 주기 동안에 혈관벽의 유연성이 유동장에 큰 영향을 미치며, 경동맥 분지각이 커짐에 따라 경동맥 공동에서 유동장의 정체영역이 더 넓게 분포한다는 연구결과를 얻었다.

Energy dissipation system for earthquake protection of cable-stayed bridge towers

  • Abdel Raheem, Shehata E.;Hayashikawa, Toshiro
    • Earthquakes and Structures
    • /
    • 제5권6호
    • /
    • pp.657-678
    • /
    • 2013
  • For economical earthquake resistant design of cable-stayed bridge tower, the use of energy dissipation systems for the earthquake protection of steel structures represents an alternative seismic design method where the tower structure could be constructed to dissipate a large amount of earthquake input energy through inelastic deformations in certain positions, which could be easily retrofitted after damage. The design of energy dissipation systems for bridges could be achieved as the result of two conflicting requirements: no damage under serviceability limit state load condition and maximum dissipation under ultimate limit state load condition. A new concept for cable-stayed bridge tower seismic design that incorporates sacrificial link scheme of low yield point steel horizontal beam is introduced to enable the tower frame structure to remain elastic under large seismic excitation. A nonlinear dynamic analysis for the tower model with the proposed energy dissipation systems is carried out and compared to the response obtained for the tower with its original configuration. The improvement in seismic performance of the tower with supplemental passive energy dissipation system has been measured in terms of the reduction achieved in different response quantities. Obtained results show that the proposed energy dissipation system of low yield point steel seismic link could strongly enhance the seismic performance of the tower structure where the tower and the overall bridge demands are significantly reduced. Low yield point steel seismic link effectively reduces the damage of main structural members under earthquake loading as seismic link yield level decreases due their exceptional behavior as well as its ability to undergo early plastic deformations achieving the concentration of inelastic deformation at tower horizontal beam.