• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.10-18
• /
• 2003

This paper presented a design and control of a biped walking RGO(robotic gait orthosis) and its simulation. The biped walking RGO was distinguished from the other one by which had a very light-weight and a new RGO system will be made of 12-servo motors and 12-controllers. The vibration evaluation of the dynamic PLS(posterior leaf splint) on the biped walking RGO was used to access by the 3-axis accelerometer with a low frequency vibration of less than 30 Hz. The galt of the biped walking RGO depends on the constrains of mechanical kinematics and the initial posture. The stability of dynamic walking was investigated by analyzing the ZMP (zero moment point) of the biped walking RGO. It was designed according to the human wear type and was able to accomodate itself to the environments of S.C.I. Patients. The Joints of each leg were adopted with a good kinematic characteristics. To analyse joint kinematic properties. we made the strain stress analysis of the dynamic PLS and the analysis study of FEM with a dynamic PLS.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.203-211
• /
• 2006

In this research, a comprehensive study is performed upon the design of a quadruped walking robot. In advance, the walking posture and skeletal configuration of the vertebrate are analyzed to understand quadrupedal locomotion, and the roles of limbs during walking are investigated. From these, it is known that the forelimbs just play the role of supporting their body and help vault forward, while most of the propulsive force is generated by hind limbs. In addition, with the study of the stances on walking and energy efficiency, design criteria and control method for a quadruped walking robot are derived. The proposed controller, though it is simple, provides a useful framework for controlling a quadruped walking robot. In particular, introduciton of a new rhythmic pattern generator relieves the heavy computational burden because it does not need any computation on kinematics. Finally, the proposed method is validated via dynamic simulations and implementing in a quadruped walking robot, called AiDIN(Artificial Digitigrade for Natural Environment).

• The Journal of Korean Physical Therapy
• /
• 제22권1호
• /
• pp.47-51
• /
• 2010

Purpose: The purpose of this study was to determine whether there are any differences, with and without a toe spreader (TS), in dynamic foot pressure distribution in children with spastic diplegic cerebral palsy. Methods: Dynamic foot pressure recording using the RSscan system were obtained during walking in 12 participants (male=7, female=5) with and without TS. Mean force was measured for four different plantar regions; great toe, forefoot, midfoot, hindfoot. Displacement of center of pressure (COP), velocity of COP displacement and stance time were also measured during gait. Results: TS walking exhibited statistically significant decrease of mean force under great toe and forefoot (p<0.05), compared with a barefoot walking. Also, TS walking exhibited statistically significant increase of antero-posterior displacement of COP (p>0.05). Conclusion: These findings indicate the potential clinical utility of toe spreader to correct dynamic foot pressure during stance phase in children with spastic diplegic cerebral palsy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.538-538
• /
• 2000

This paper presents a learning controller for repetitive gate control of biped robot. The learning control scheme consists of a feedforward learning rule and linear feedback control input for stabilization of learning system. The feasibility of teaming control to biped robotic motion is shown via dynamic simulation with 12 dof biped robot.

• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.307-314
• /
• 2006

In this paper, we present a comprehensive study for the development of quadruped walking robot. To understand the walking posture of a tetrapod animal, we begin with a careful observation on the skeletal system of tertapod animals. From taking a side view of their skeletal system, it is noted that their fore limbs and hind limbs perform characteristic roles during walking. Moreover, the widths of footprints and energy efficiency in walking have a close relationship through taking a front view of their walking posture. According to these observations, we present a control method where the kinematical solutions are not necessary because we develop a new rhythmic gait pattern for the quadruped walking robot. Though the proposed control method and rhythmic pattern are simple, they can provide the suitable motion planning for the robot since the resultant movement is based on the animal's movements. The validity of the proposed idea is demonstrated through dynamic simulations.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2368-2375
• /
• 2015

To accommodate various navigational commands, a humanoid should be able to change its walking motion in real time. Using the modifiable walking pattern generation (MWPG) algorithm, a humanoid can handle dynamic walking commands by changing its walking period, step length, and direction independently. If the humanoid is given a command to perform an infeasible movement, the algorithm substitutes the infeasible command with a feasible one using binary search. The feasible navigational command is subsequently translated into the desired center-of-mass (CM) state. Every sample time CM reference is generated using a zero-moment-point (ZMP) variation scheme. Based on this algorithm, various complex walking patterns can be generated, including backward and sideways walking, without detailed consideration of the feasibility of the navigational commands. In a previous study, the effectiveness of the MWPG algorithm was verified by dynamic simulation. This paper presents experimental results obtained using the small-sized humanoid robot platform DARwIn-OP.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.273-280
• /
• 2000

Building structures which are in need of large open space make the damping effect of the structures decrease greatly. Assembly and office buildings with a lower natural frequency have a higher possibility of experiencing excessive vibration induced by human activities. These excessive vibration make the residents uncomfortable and the serviceability deterioration. The loads induced by human activities were classified into two types. First type is in place loads as like jumping, foot stamping and body bouncing. The other type is moving loads as like walking, running and dancing. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities, The earlier works were mainly concerned to parameters study of dynamic loads as like activity type, weight, sex, surface condition of structure and etc. In this paper, we have measured directly the walking loads by using the platform. And we have evaluated and analyzed load-time history of walking loads. One of the most important parameter is pacing rate (walking speed) in the walking loads. The difference between the maximum value and minimum value of walking loads depends on the walking speed.

• 융합신호처리학회논문지
• /
• 제13권2호
• /
• pp.113-118
• /
• 2012

기존의 4족 보행 로봇에서의 다리 부착 위치는 말, 사자 등의 동물에서 볼 수 있는 것과 같은 형태로서 사람들에게 익숙한 형태이기 때문에 외관상 자연스러우나 보행의 안정성, 보행의 속도 등 보행의 관점에서는 비효율적인 측면이 있다. 본 논문에서는 자연계에는 존재하지 않는 형태로서 보행이 효율적으로 이루어지도록 네 다리를 몸체에 부착한 형태의 4족 보행 로봇에 대하여 기술한다. 제안된 4족 보행 로봇은 로봇의 진행 방향에 대하여 좌우 다리와 전후다리를 갖는다. 일반적인 구조의 4족 보행 로봇은 정적인 보행을 하기 위하여 항상 세 다리가 지면에 닿아야하고 로봇의 무게 중심을 로봇 진행 방향에 대하여 좌우로 이동시켜주어야 한다. 또한 보행 속도를 높이기 위해서는 두 다리만 동시에 지면에 닿는 동적인 보행을 수행하여야 하는데 이는 제어하기가 쉽지 않고 사용된 모터의 특성에 따라서는 동적인 제어가 불가능할 수도 있다. 반면 제안된 로봇은 정적인 보행에서도 두 다리를 동시에 이동할 수 있어 보행의 안정성과 효율성을 크게 향상시켰다.

• The Journal of Korean Physical Therapy
• /
• 제24권2호
• /
• pp.73-81
• /
• 2012

Purpose: The aim of the present study was to measure the standing balance symmetry of stroke patients using a force-plate with computer system, and to investigate the correlation between the standing balance symmetry and that of the walking function in stroke patients. Methods: 48 patients with stroke (34 men, 14 women, $56.8{\pm}11.72$ years old) participated in this study. Static standing balance was evaluated by the weight distribution on the affected and the nonaffected lower limbs, sway path, sway velocity, and sway frequency, which reflected the characteristic of body sway in quiet standing. Dynamic standing balance was evaluated by anteroposterior and mediolateral sway angle, which revealed the limit of stability during voluntary weight displacement. Symmetry index of static standing balance, (SI-SSB) calculated by the ratio of the affected weight distribution for the nonaffected weight distribution, and symmetric index of dynamic standing balance (SI-SDB) by the ratio of the affected sway angle for the nonaffected sway angle. Functional balance assessed by a Berg balance scale (BBS), and the functional walking by 10m walking velocity, as well as the modified motor assessment scale (mMAS). Results: Static balance scales and SI-SSB was the only correlation with BBS (p<0.05). Dynamic balance scales and SI-DSB, not only was correlated with BBS, but also with 10m walking velocity and mMAS (p<0.01). Additionally, there was a significant difference between SI-SSB and that of SI-DSB (p<0.01). Conclusion: The balance and the walking function relate to real life in the stroke showed strong relationships with the dynamic standing balance symmetry in the frontal plane and the ability of anterior voluntary weight displacement in sagittal plane.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.245-255
• /
• 2019

In this paper, an inverted-pendulum model consisting of a point supported by spring limbs with roller feet is adopted to simulate human walking load. To establish the kinematic motion of first and second single and double support phases, the Lagrangian variation method was used. Given a set of model parameters, desired walking speed and initial states, the Newmark-${\beta}$ method was used to solve the above kinematic motion for studying the effects of roller radius, stiffness, impact angle, walking speed, and step length on the ground reaction force, energy transfer, and height of center of mass transfer. The numerical simulation results show that the inverted-pendulum model for walking is conservative as there is no change in total energy and the duration time of double support phase is 50-70% of total time. Based on the numerical analysis, a dynamic load factor ${\alpha}_{wi}$ is proposed for the traditional walking load model.