• 한국안전학회지
• /
• 제27권6호
• /
• pp.78-83
• /
• 2012

In this study, some experimental results of the peroxide-degradation process of polypropylene(PP) in a co-rotating twin-screw extruder to produce controlled rheology polypropylene(CRPP) are presented. The peroxide was dicumyl peroxide(DCP) and the concentration of DCP was in the range 0-0.3 wt%. It was found that the rheological properties of PP change significantly during reactive extrusion. Melt flow index(MFI) increased with DCP concentration. Intrinsic viscosity decreases with increasing DCP concentration. From dynamic rheological data, number average molecular weight(Mn), weight average molecular weight(Mn) and molecular weight distribution(MWD) were calculated. Results indicated that Mw decreases and MWD becomes narrower with increasing peroxide concentration. Especially, particle size distribution of CRPP decreases with increasing DCP concentration by chemical powdering process, and anti-slip floor paint, CRPP(DCP 0.2 wt%) powder by 10phr was friction coefficient 2.15 ${\mu}$, abrasion resistance 511.18%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1621-1622
• /
• 2006

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristic s were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Also we observed the movement characteristics of PZT actuator with LDV(Laser Doppler Vibrometer) system, oscilloscope and dynamic signal analyzer. Missing nozzles caused by bubbles in chamber were monitored by their resonance frequency. Using the water based ink of viscosity of 4.8 cps and surface tension of 0.025N/m, it is possible to eject stable droplets up to 20kHz, 4.4m/s and above 8pL at the different applied driving waveforms.

• 에너지공학
• /
• 제24권1호
• /
• pp.132-136
• /
• 2015

바이오디젤은 재생가능한 친환경적인 연료로서 화석연료의 대체에너지로 수송분야에서 각광받고 있다. 따라서 바이오디젤의 사용량은 향후 꾸준히 증가할 것으로 보이며, 이에 대한 연구가 필요하다. 따라서 본 연구에서는 순수 디젤 대비 바이오디젤이 질량기준으로 0%, 5%, 20%, 50%, 100% 혼합된 연료를 사용하여 분무 및 연소실험을 진행하고, 분무각, 평균 입경, 열발생율 등의 특성을 도출하였다. 실험 결과, 바이오디젤의 혼합률이 증가할수록 연료의 점도 및 밀도가 증가하여 분무각과 특정 위치에서의 평균 입경이 작아지는 것을 확인할 수 있었으며, 바이오디젤의 함산소 특성으로 인해 초기 연소가 촉진되며, 이로 인해 연소 종료 시점이 앞당겨 지는 것을 볼 수 있었다.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1080-1085
• /
• 2012

본 논문에서는 작동유의 최대 동점성 계수가 400cSt까지 변하는 조건에서 항공기 도어 댐퍼용 칼날형 댐핑 오리피스를 설계하였다. 전산 유동 해석과 실험을 통하여 칼날 오리피스의 유량계수를 분석하였고, 오리피스의 크기와 칼날 각도, 유동방향, 레이놀즈수가 미치는 영향을 고려하였다. 이 결과를 바탕으로 오리피스의 크기에 따라 댐퍼의 성능 기준을 충족시키기 위해 제한해야 하는 댐퍼의 쿨롱 마찰력 범위를 유도하였다.

• 한국도로학회논문집
• /
• 제1권2호
• /
• pp.121-133
• /
• 1999

본 논문은 국내 정유사에서 생산되는 도로 포장용 아스팔트에 대하여 노화에 따른 거동 특성을 파악하였다. 이를 위해 국내의 5개 정유회사에 생산되는 두가지 등급의 아스팔트 제품(침입도 85-100, 침입도 60-70)을 포함한 총 9종에 대하여 노화 단계별(노화 이전, 단기노화, 장기노화)로 국내 스트레이트 아스팔트의 침입도$(25^{\circ}C)$, 점도$(50^{\circ}C\;135^{\circ}C)$, 연화점, 및 DSR 시험$(-20^{\circ}C\sim30^{\circ}C)$을 수행하여, 아스팔트의 물성 변화 특성을 고찰하였다. 연구 결과, 국내 스트레이트 아스팔트의 거동은 고온($60^{\circ}C$근방) 및 상온$(10-30^{\circ}C)$범위에서 정유사 제품에 따라 상당한 차이를 나타내었으며, 저온의 경우에는 정유사 제품이나 등급에 관계없이 거의 유사한 거동을 나타내었다. 따라서 어느 정유사의 아스팔트를 사용하는가에 따라, 저온에서의 온도 균열에 대한 저항성은 다소 비슷한 수준일 것으로 판단되지만, 소성변형 및 피로 균열에 대한 저항성이 상이하게 나타날 것으로 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제19권2호
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

• 융합정보논문지
• /
• 제9권8호
• /
• pp.155-163
• /
• 2019

수평원형관에서 나노입자인 산화알미늄과 기본유체인 물의 혼합인 나노유체에 대한 층류 혼합대류열전달현상을 유한체적법의 수치적 방법으로 규명하였다. 나노유체에 대하여 2상 혼합모델을 적용하였으며, 나노입자의 물성은 온도와 체적농도의 함수를 사용하였다. 수치해석에 적용한 모든 모델의 타당성 검증을 위하여 Kim등의 실험결과와 비교하였으며 좋은 결과를 얻었다. 벽면을 일정한 열유속으로 가열하므로 나노유체는 벽면부근에서 형성된 부력에 의하여 2차유동이 생성된다. Richardson수와 나노입자의 농도가 증가할수록 강한 2차유동이 형성되어 열전달을 향상시키게 된다. 또한 Richardson수와 나노입자의 농도가 증가하면 대류열전달계수와 전단응력도 증가한다. 이런 연구들은 열교환기의 성능향상을 위하여 나노유체를 적용하는데 기본자료로 활용이 가능하다. 이번 연구를 기반으로 향후 2중관형열교환기등 다양한 열교환기에 적용할 예정이다.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.15-21
• /
• 2021

In this study, we investigated the dynamics of a droplet impacting rough hydrophobic surfaces through high-speed imaging. Micrometer-sized structures with grooves and pillars were fabricated on smooth Polydimethylsiloxane (PDMS) surfaces by laser ablation. We used Newtonian and non-Newtonian liquid droplets to study the drop impact dynamics. De-ionized water and aqueous glycerin solutions were used for the Newtonian liquid droplet. The solutions of xanthan gum in water were prepared to provide elastic property to the Newtonian droplet. We found that the orientation of the surface structures affected the maximal spreading diameter of the droplet due to the degree of slippage. During the droplet retraction, the dynamic receding contact angles were measured to be around 90° or less. It resulted in the formation of the micro-capillary bridges between the receding droplet and the surface structures. Then, the rupture of the capillary bridge led to the formation of micrometer-sized droplets on top of the surface structures. The size of the microdroplets was found to increase with increasing the impacting velocity and viscosity of the Newtonian liquid droplets. However, the size of the isolated microdroplets decreased with enhancing the elasticity of the droplets, and the size of the non-Newtonian microdroplets was not affected by the impacting velocity.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.149-154
• /
• 2010

단일 탄소섬유/페놀수지 및 탄소나노튜브-페놀수지 복합재료의 계면적 특성을 젖음성과 함께 전기저항 측정 및 미세역학시험법을 사용하여 평가하였다. 순수 페놀수지 및 탄소나노튜브-페놀수지 복합재료의 Broutman시편을 사용한 압축강도는 인장강도와 비교하였다. 탄소나노튜브-페놀수지 복합재료의 접촉저항은 2점 및 4점법에 의한 경사형 시편을 사용하여 측정하였다. 동적접촉각에 의한 표면에너지와 젖음성은 Wilhelmy 플레이트 법으로 측정하였다. 표면에서 탄소나노튜브가 불균일한 미세구조로 형성되므로, 동적접촉각은 90도 이상의 소수성을 나타내었다. 탄소나노튜브-페놀수지 복합재료는 보다 나은 응력전달 효과에 기인하여 순수 페놀수지보다 더 큰 겉보기 강성도를 보여주었다. 단일 탄소섬유와 탄소나노튜브-페놀수지 복합재료간의 접착일, $W_a$은 탄소나노튜브 첨가로 인한 점도 증가 때문에, 순수 페놀수지 보다 더 크게 나타났다. 이는 마이크로 풀 아웃 시험에서 단일 탄소섬유의 미세파손 형태와 일치함을 보여 주었다.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.47-58
• /
• 2018

PURPOSES : The purpose of this study is to evaluate the mechanical properties of a cold-recycling asphalt mixture used as a base layer and to determine the optimum emulsified-asphalt content for ensuring the mixture's performance. METHODS : The physical properties (storage stability, mixability, and workability) of three types of asphalt emulsion (CMS-1h, CSS-1h, and CSS-1hp) were evaluated using the rotational viscosity test. Asphalt emulsion residues, prepared according to the ASTM D 7497-09 standard, were evaluated for their rheological properties, including the $G*/sin{\delta}$and the dynamic shear modulus (${\mid}G*{\mid}$). In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were evaluated for the cold-recycling asphalt mixtures fabricated according to the type and contents of the emulsified asphalt. RESULTS : The CSS-1hp was found to be superior to the other two types in terms of storage stability, mixability, and workability, and its $G*/sin{\delta}$ value at high temperatures was higher than that of the other two types. From the dynamic shear modulus test, the CSS-1hp was also found to be superior to the other two types, with respect to low-temperature cracking and rutting resistance. The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt content. However, the mixtures with one-percent emulsified-asphalt content did not meet the national specification in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). CONCLUSIONS : The emulsified-asphalt performance varied greatly, depending on the type of base material and modifying additives; therefore, it is considered that this will have a great effect on the performance of the cold-recycling asphalt pavement. As the emulsified-asphalt content increased, the strength change was significant. Therefore, it is desirable to apply the strength properties as a factor for determining the optimum emulsified-asphalt content in the mix design. The 1% emulsified-asphalt content did not satisfy the strength and aggregate coverage criteria suggested by national standards. Therefore, the minimum emulsified-asphalt content should be specified to secure the performance.