• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.91-96
• /
• 1995

In this paper we propose algorithms for high resolution image sequence interpolation. Image sequences, in general, are assumed to have greater amount of information than a still image. By this reason, image sequences can be used to improve the resolution of interpolated image sequences. Therefore the proposed algorithms can be the theoretical basis for interpolating dynamic image sequences. In order to demonstrate the validity of the proposed algorithms, experimental results using both synthetic and real test images are presented.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.3 s.108
• /
• pp.255-262
• /
• 2006

Frequency spectrum using the conventional Fourier analysis gives adequate information about the dynamic characteristics of the slider air bearing for the linear and stationary cases. The intermittent contacts for the extremely low flying height, however, generate nonlinear and nonstationary vibration at the instant of contact. Nonlinear dynamic model should be developed to simulate the impulse response of the air bearing during slider-disk contact. Time-frequency analysis is widely used to investigate the nonstationary signal. Several time-frequency analysis methods are employed and compared for the slider vibration signal caused by the impact against an artificially induced scratch on the disk. The representative Wigner-Ville distribution leads to the severe interference problem by cross terms even though it gives good resolution both in time and frequency. The smoothing process improves the interference problem at the expense of resolution. In order to get the results with good resolution and little interference, the reassignment method is proposed. Among others the reassigned Gabor spectrogram shows the best resolution and readability with negligible interference.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.690-693
• /
• 2004

This paper proposes a multi-resolution electrostatic potential field (MREPF) based solution to the mobile robot path planning and collision avoidance problem in 2D dynamic environment. The MREPF is an environment method in calculation time and updating field map. The large scale resolution map is added to EPF and this resolution map interacts with the small scale resolution map to find an optimal solution in real time. This approach can be interpreted with Atlantis model. The simulation studies show the efficiency of the proposed algorithm.

• Journal of Environmental Science International
• /
• v.15 no.12
• /
• pp.1141-1154
• /
• 2006

Orographic effect is one of the important factors to induce Local circulations and to make atmospheric turbulence, so it is necessary to use the exact topographic data for prediction of local circulations. In order to clarify the sensitivity of the spatial resolution of topography data, numerical simulations using several topography data with different spatial resolution are carried out under stable and unstable synoptic conditions. The results are as follows: 1) Influence of topographic data resolution on local circulation tends to be stronger at simulation with fine grid than that with coarse grid. 2) The hight of mountains in numerical model become mote reasonable with high resolution topographic data, so the orographic effect is also emphasized and clarified when the topographic data resolution is higher. 2) The higher the topographic resolution is, the stronger the mountain effect is. When used topographic data resolution become fine, topography in numerical model becomes closer to real topography. 3) The topographic effect tends to be stronger when atmospheric stability is strong stable. 4) Although spatial resolution of topographic data is not fundamental factor for dramatic improvement of weather prediction accuracy, some influence on small scale circulation can be recognized, especially in fluid dynamic simulation.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.25-32
• /
• 2004

The new algorithm for higher performance of dynamic PIV has been proposed. Present study considered mathematical basis of PIV analysis for multiple-time-step images and it enables us to analyze the high time-resolution PIV, which is obtained by dynamic PIV system. Conventional single pair image PIV analysis gives us the velocity field data in each time step but it sometimes contains unnecessary information of target flow. Present technique utilize multi-time step correlation information, and it is analyzed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.417-425
• /
• 2020

Multi-resolution modeling(MRM) is required when simulating objects in variable resolution and can be applied for interoperating systems, which simulate objects in fixed resolution. However, most interoperation middleware do not support MRM, so participating models must handle several issues to simulate MRM system. In this paper, we propose an interoperation system, which is composed of several different resolution models, based on the High Level Architecture and Run-Time Infrastructure(HLA/RTI). In the proposed architecture, each model participates to a HLA federation through MRM adapter application, which supports data resolution conversion and HLA services while communicating with the model. MRM adapter application can be implemented based on an MRM adapter, and an adapter application development tool is proposed to support developing the application. Using the tool, developers can easily implement data resolution conversion component plugged-in HLA adapter. A case study is implemented in the proposed MRM system, and shows that models of different resolution works successfully with dynamic resolution changes.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.611-616
• /
• 2003

Recently, the HFC-CATV network stand in a substructure of superhighway information network. Because of sharing up to 500 of subscribes, the Collision Resolution Algorithm needs in the upstream channel of HFC-CATV network. In order to provide Quality of Service (QoS) to users with real-time data such as voice, video and interactive service, the research of Collision Resolution Algorithm must include an effective priority scheme. In IEEE 802.14, the Collision Resolution Algorithm has high request delay because of static PNA(Priority New Access) slots structure and different priority traffics with the same probability. In order to resolve this problem, this paper proposed dynamic priority collision resolution algorithm with ternary tree algorithm. It has low request delay according to an increase of traffic load because high priority traffic first resolve and new traffic content with different probability. In the result of the simulation, it demonstrated that the proposed algorithm needs lower request delay than that of ternary tree algorithm with static PNA slots structure.

• Journal of Broadcast Engineering
• /
• v.28 no.3
• /
• pp.314-328
• /
• 2023

In this paper, we propose a texture map compression method based on the hierarchical coding method of SHVC to support the scalability function of dynamic mesh compression. The proposed method effectively eliminates the redundancy of multiple-resolution texture maps by downsampling a high-resolution texture map to generate multiple-resolution texture maps and encoding them with SHVC. The dynamic mesh decoder supports the scalability of mesh data by decoding a texture map having an appropriate resolution according to receiver performance and network environment. To evaluate the performance of the proposed method, the proposed method is applied to V-DMC (Video-based Dynamic Mesh Coding) reference software, TMMv1.0, and the performance of the scalable encoder/decoder proposed in this paper and TMMv1.0-based simulcast method is compared. As a result of experiments, the proposed method effectively improves in performance the average of -7.7% and -5.7% in terms of point cloud-based BD-rate (Luma PSNR) in AI and LD conditions compared to the simulcast method, confirming that it is possible to effectively support the texture map scalability of dynamic mesh data through the proposed method.

• Journal of Arbitration Studies
• /
• v.30 no.3
• /
• pp.95-113
• /
• 2020

The worldwide diffusion of COVID-19 contributes to electronic commerce all over the world. The proliferation of high volume and small value electronic commerce naturally has combined artificial intelligence with online dispute resolution (ODR). This paper investigates the age effect on Artificial Intelligence acceptability in online dispute resolution and its empirical findings are as follows. First, seven measures out of the nine employed in this case study shows a coherent dynamic pattern over the age spectrum. In other words, the total samples are a heterogenous group rather than a homogeneous one. Second, medium answer occupies a non-negligible portion across answers from nine research questions. It seems to indicate that a considerable portion of Korean respondents are hesitant to make a choice on artificial intelligence at this juncture. Third, all of the respondents agree that the introduction of AI to the dispute resolution could contribute to the hastening of the dispute resolution process. Fourth, most of the respondents agree that artificial intelligence might have the cognitive ability but not the sympathetic or affective ability to handle the electronic commerce disputes.