• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.947-950
• /
• 2008

This paper reports of traceable and repeatable time resolved colorimetric measurements of the luminance- and colour variation occurring during the frame refresh period of FPD's. During one frame period a number of measurements are performed, and for the dynamic artifacts a simulated smooth pursuit eye tracking algorithm is included.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.929-935
• /
• 2005

This paper contains a review of methods to analise static and dynamic properties of trap states in TFTs. The Gap Density of States is extracted from C-V and I-V characteristics. Switch on transients and small signal ac measurements are used in conjunction with simulation and an analytic model to extract traps dynamic parameters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.195-196
• /
• 2000

Fast response time is realized by using LTN-LCDs. To calculate the dynamic electro-optical characteristics, Ericksen-Leslie theory is used for the dynamic profile of molecules and order tensor representation is adopted for the free energy calculation.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.25-31
• /
• 2021

The semiconductor and display equipment demands an ultra-fine precision of several nm to several ㎛, and the scale is getting smaller due to the explosive development. The manufacturing process equipment for such products with ultra-fine precision is very sensitive to ultra-small vibrations flowing from the floor, resulting in problems of production defects and yield degradation. The vibration criteria are a standard that regulates the vibration environment of the floor where such precision process equipment will be installed. The BBN vibration criteria defined the allowable vibration velocity level in the frequency domain with a flat and inclined line and presented a rating according to it. However, the actual vibration criteria have appeared with various magnitudes in the frequency domain according to the dynamic characteristics of individual equipment. In this study, the relationship between the relative motion of two major points in the equipment and the vibration magnitude of the floor is presented using the frequency response function of a simple 3-DOF model. It is describing the magnitudes according to the frequency of the floor vibration that guarantees the allowable relative motion and this can be used as the vibration criteria. In order to obtain the vibration criteria experimentally a method of extracting through a modal test was introduced and verified analytically. It provides vulnerable frequency and magnitude to floor vibration in consideration of the dynamic characteristics of individual equipment. And it is possible to know necessary to improve the dynamic characteristics of the equipment, and it can be used to check the vibration compatibility of the place where the equipment will be installed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1577-1580
• /
• 2012

The orientational and dynamic behavior of liquid crystal molecules on the alignment layer surfaces of liquid crystal display (LCD) devices is crucial to their performance, but there are only a few methods of experimentally elucidating the interactions between the liquid crystals and the alignment layers. Inspired by the natural and technical similarities between membrane proteins in lipid bilayers and liquid crystals in LCDs, we employed solid-state NMR methodologies originally developed for the study of membrane proteins in lipid bilayers for the in-situ analysis of liquid crystal display panels. In this article, we present a home-built 500 MHz narrowbore (NB) The orientational and dynamic behavior of liquid crystal molecules on the alignment layer surfaces of liquid crystal display (LCD) devices is crucial to their performance, but there are only a few methods of experimentally elucidating the interactions between the liquid crystals and the alignment layers. Inspired by the natural and technical similarities between membrane proteins in lipid bilayers and liquid crystals in LCDs, we employed solid-state NMR methodologies originally developed for the study of membrane proteins in lipid bilayers for the in-situ analysis of liquid crystal display panels. In this article, we present a home-built 500 MHz narrowbore (NB) $^{19}F-^{13}C$ double resonance solid-state NMR probe with a flat-square coil and the first application of this probe for the in-situ analysis of LCD panel samples. double resonance solid-state NMR probe with a flat-square coil and the first application of this probe for the in-situ analysis of LCD panel samples.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1483-1486
• /
• 2006

We describe the contrast enhancement of images using an APL(Average Picture Level) in an AC-PDP. A CEC(Contrast Enhancement Curve) determined by the APL was applied to enhance the contrast of images depending on the dominant gray levels. The most effective advantage of the proposed method is that it is easier to adjust the dynamic ranges to be enhanced with good quality and implement in a hardware system. The simulation result shows that the proposed method enhanced the contrast of given images significantly and kept the original brightness except the specific area of them compared to the HE(Histogram Equalization).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.647-650
• /
• 2005

A new driving scheme, Address and Display Period Complex Driving for Expanding Gray Scale(ACE), is proposed by mixing Address Display period Separated(ADS) and Address While Display(AWD). In this method scan lines are divided in blocks driving by AWD and scan lines in block progress sequential high speed addressing. ADS driving get accomplished in low gray level for expanding gray scale. Scan time is reduced and the number of subfields is increased by high speed addressing of ACE. That expands the gray scale and decreases the dynamic false contour. Also, that improves contrast by using ramp reset.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.461-463
• /
• 2009

We report on the fabrication of ZnO-based thin-film transistor (TFT) inverters with top and bottom gate structures with $Al_2O_3$ dielectrics grown by atomic layer deposition (ALD). Since the top gate ZnO-based TFT showed somewhat lower field effect mobility than that of the bottom gate device, our ZnO-based TFT inverters were designed with identical dimensions for both channels. This TFT inverter device demonstrated an high voltage gain at a low supply voltage of 5 V and clear dynamic behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1344-1351
• /
• 2004

This study develops a haptic display model which is an indispensable for the force generation in the virtual environment. In developing the haptic display model, a Proxy concept and a Karnopp friction model are utilized to generate the reaction force and the friction force. Also this study develops a 2 D.O.F. remote wiping system. This system is composed of a 2 D.O.F. master manipulator, a force sensor equipped 2 D.O.F. slave manipulator and a real time controller. With the developed remote wiping system, this study identifies the friction characteristic of the aluminum, acryl and rubber plate. The results are used as the dynamic friction coefficient of the haptic display model. This study shows the efficiency of the developed haptic display model by the comparison between the friction characteristic of the haptic display with the developed haptic display model and the friction characteristic of the real aluminum, acryl and rubber plate.