• Structural Monitoring and Maintenance
• /
• 제6권1호
• /
• pp.19-32
• /
• 2019

One way to provide safe buildings and to protect tenants from the terrorist attacks that have been increasing in the world is to study the behavior of buildings members after being exposed to dynamic loads. Buildings behaviour after being exposed to attacks inspired researchers all around the world to investigate the effect of impact loads on buildings members like slabs and to deeply study the properties of High Performance Concrete. HPC is well-known in its high performance and resistance to dynamic loads when it is compared with normal weight concrete. Therefore, the aim of this paper is finding out the impact of dynamic loads on RPC slabs' flexural capacity, serviceability loads, and failure type. For that purpose and to get answers for these questions, three concrete slabs with 0.5, 1, and 2% steel fiber contents were experimentally tested. The tests results showed that the content of steel fiber plays the key role in specifying the static capacity of concrete slabs after being dynamically loaded, and increasing the content of steel fiber led to improving the static loading capacity, decreased the cracks numbers and widths at the same time, and provided a safer environment for the buildings residents.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.157-163
• /
• 2001

The influences of carbon black loading and cure type on the cure characteristics including kinetics and dynamic mechanical properties were investigated for a styrene-butadiene rubber (SBR). The rate constants of accelerated sulfur vulcanization reaction at three different temperatures were determined using a cure rheometer, and they were compared with those from the direct measurement of sulfur concentration. The strain softening behavior under dynamic deformation, known as the Payne effect was also discussed depending on the carbon black loading and cure type.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.42-49
• /
• 1997

The purpose of this study was to investigate the relationships among density, moisture content, and modulus of elasticity in which are important characteristics in physical and mechanical properties of woods. In this study, the dynamic MOE was calculated through the combination with resonance frequency of transverse vibration method and density, and the estimated moisture contents were calculated with two different equations (1, 2) in order to compare with experimental moisture contents. The following results from this study were obtained: 1. According to the regression analysis with two different parameters (E and density), the two regression lines appeared to be straight intersecting at 0.6 density. As another factor, moisture contents in wood also influenced on the analysing regression at the below F.S.P. 2. When considering the relationship between moisture contents and E, the tendency of each moisture content and E showed very similar pattern suggesting that moisture contents in addition to density are very important parameter. 3. When together with moisture contents and density as parameters for multiple regression analysis, coefficiences of determinations are dramatically improved. Interestingly, the coefficiences of determinations are further increased when analysing at the below point of F.S.P. and when analysing higher and lower density separately. In summary, more correct estimation of the dynamic MOE of woods can be possible with only transverse vibration and density in wood. Therefore, with this indirect method, the calculation of MOE in all kinds of woods including timber, live tree and wood products can be feasible resulting in accelerating the efficiency of time and labor.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.229-236
• /
• 2003

본 연구에서는 우란바톨(Ulanbator)에서 북경(Beijing)사이의 지역에서 샘플링한 동결된 응회암 풍화토의 동적 특성을 규명하기 위해 풍화토와, 글래스비드(glass bead)를 대상으로 온도변화에 따른 초음파 속도를 sing-around 법을 사용하여 측정하였다. 본 실험을 통해 초음파 속도는 온도가 증가함에 따라 감소하였고 초음파 속도와 부동수분 사이에는 선형적인 관계가 존재함을 확인하였다. 또한 동결토의 초음파 실험결과, 종파가 시료의 종류에 크게 영향을 받지 않기 때문에 부동수분과 초음파 속도와의 관계규명에 적합하다고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.61-66
• /
• 1997

Paulownia wood has been used as sound board for Korean traditional musical instruments such as Keomungo(Korean lute), Kayagum(twelve-stringed Korean harp) and Changgu(hour-glass shaped drum), etc. The acoustic properties of wood affected not only by dimensions but also by density and stiffness of wood. Due to inhomogeneity and hygroscopicity of wood. the acoustic properties of wood are inconsistent. To clarify the effect of moisture content and air dry density on acoustic properties, longitudinal vibration experiment was accomplished in 3 moisture content levels of 9.6, 11.1 and 12.5% and in 3 air dry density levels of 0.22, 0.25 and 0.28g/$cm^3$. The results were as follows: As the moisture content increased, the fundamental frequency. specific dynamic Young's modulus and sound velocity decreased, but the internal friction increased so that loss of energy increased. The values in damping of sound radiation were rapidly decreased at 12.5%. It meant that the damping of internal friction was larger than damping of sound radiation at high moisture content. As the air dry density increased, the fundamental frequency, specific dynamic Young's modulus and sound velocity increased, but the internal friction and damping of sound radiation decreased so that loss of energy decreased. And acoustic converting efficiency was hardly influenced by increasing air drying density.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.263-271
• /
• 1991

When grains is subjected to oscillating load, the dynamic viscoelastic behavior of the material will be describe the complex modulus of the material. The complex modulus and therefore the storage modulus, the loss modulus, and the phase angle for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex relaxation moduli of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analized. The storage modulus of the rough rice kernel slightly increased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss modulus of the sample very rapidly decreased with increase in the frequency on those frequency ranges. It was shown that the storage modulus and the loss modulus of the sample increased with decrease in grain moisture content. Effect of grain moisture content on the storage modulus of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss modulus of the sample was more significant than effect of grain moisture content.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1765-1774
• /
• 2008

Due to recent increase of product placement(aka. PPL) in TV drama and entertainment program, the audience of these programs is exposed to the advertisement in the form of the props and backgrounds without discernment. Advancement in digital data broadcasting technology enabled advertisers to insert detailed information of the product or associated advertisement link into the content of the broadcast program as an interactive advertisement. With the interactive advertisement, the audience can focus on the content of the program and the advertiser can create an advertisement with a rich content through the interaction between the advertisement and the audience. It is possible because the interactive advertisement is dynamic advertisement behavior only activated by the audience's intention. In this research, we develop a Hot-spot generator to insert interactive advertisement in the DMB broadcast program. We also suggest dynamic Hot-spot generation technique that allows the Hot-spot object to follow not only the shape of the advertising object in the program, but also the movement of the object as the program progresses.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1187-1192
• /
• 2022

강원도는 대표적인 레저휴양 관광지이다. 그러나 관광정보 제공이 기존의 이미지와 텍스트 위주의 단순성을 벗어나지 못하고 있다. 따라서 관광지 활성화를 위한 콘텐츠 사업의 연계 전략이 필요하다. 본 논문에서는 첫째, 360도 회전 VR 콘텐츠 저작기능을 제공하며 둘째, VR 콘텐츠를 맵 상에 등록한 후 사용자가 손쉽게 투어스케줄링을 저작하는 기능을 포함한 동적 플랫폼을 제안한다. 최종적으로 제안 시스템은 예비 관광여행 고객들에게 온라인 선체험을 제공하여 만족도를 높일 수 있는 기회를 제공한다.

• ETRI Journal
• /
• 제27권5호
• /
• pp.595-607
• /
• 2005

The widespread use of the Internet has led to the problem of intellectual property and copyright infringement. Digital rights management (DRM) technologies have been developed to protect digital content items. Digital content can be classified into static content (for example, text or media files) and dynamic content (for example, VOD or multicast streams). This paper deals with the protection of a multicast stream on set-top boxes connected to an IP network. In this paper, we examine the following design and architectural issues to be considered when applying DRM functions to multicast streaming service environments: transparent streaming service and large-scale user environments. To address the transparency issue, we introduce a 'selective encryption scheme'. To address the second issue, a 'key packet insertion scheme' and 'hierarchical key management scheme' are introduced. Based on the above design and architecture, we developed a prototype of a multicasting DRM system. The analysis of our implementation shows that it supports transparent and scalable DRM multicasting service in a large-scale user environment.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.670-677
• /
• 2006

Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.