• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1520-1523
• /
• 1997

A rigorous dynamic simulation was performed in binary gas mixture H$_{2}$/CO (70:30 vol.%) to determinate start-up operating conditions of PSA(Pressure Swing Adsorption) processes. The rigorous dynamic model for the PSA process contains an Ergun equation for expressing the pressure drop in a bed, and valve equations to compute the boundary pressure change of the bed. As the result of the continuous dynamic simulation of 100 operating cyles in various initial conditions, the unsteady-state appeared in the early period and the cyclic steady-state came out about 20th cycle in feed condition and vaccum condition, and 30th cycle in pure H$_{2}$ condition. As time goes by valve equations made change the pressure at each end of the bed in ressurization, countercurrunt-depressurization and pressure equalization steps. The H$_{2}$ purity and the recovery is 99.99% and 86.73% respectively, which is slightly higher than the experimental data. Main contributiion of this study includes supplying fundamental technologies of handling combined variables PSA processes by developing rigorous models.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.358-367
• /
• 2019

본 연구에서는 활성탄과 제올라이트 13X에 대한 벤젠, 톨루엔 및 자일렌 증기의 기체 흡착평형과 입자내부의 확산 특성을 조사하였다. 압력 범위 0.01~0.07 bar 사이에서 흡착온도를 각각 293.15 K, 303.15 K, 313.15 K로 변화시키면서 정적흡착실험을 수행하였다. 흡착평형은 Langmuir, Freundlich 및 Toth 흡착등온식을 적용하여 해석하였다. 그 결과 표준편차는 Langmuir 식과 Toth 식에서 낮았으며, Freundlich 식에서 표준편차가 가장 컸다. Langmuir 상수를 Arrhenius 식의 형태로 표현하여 구한 흡착에너지는 5.26~31.0 kJ/mol 정도로 물리흡착의 특성을 나타냈다. 흡착제에 따른 흡착질의 최대 흡착량은 활성탄의 경우 벤젠, 톨루엔, 자일렌으로 갈수록 최대 흡착량이 감소했으며, 제올라이트 13X의 경우 활성탄과는 반대로 최대 흡착량이 자일렌에서 가장 크고 벤젠에서 가장 작게 나타났다. 벤젠, 톨루엔 및 자일렌 증기의 유효확산계수는 약 $10^{-5}{\sim}10^{-4}cm^2/s$ 정도로 나타났으며, 압력이 증가함에 따라 값이 작아지고 온도가 증가함에 따라 값이 커지는 경향을 보였다. 온도와 압력의 변화에 따른 유효확산계수의 변화는 활성탄보다 제올라이트 13X에서 민감하게 나타났다. 따라서 압력 변동이 급격하게 발생하는 흡착공정에서 제올라이트 13X를 사용할 경우 정밀한 동적거동 예측을 위해서는 확산계수를 압력에 대한 함수로 표현하는 것이 필요하다.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.667-672
• /
• 2011

The purpose of this work is to present the experiment results by a dynamic adsorption of water vapor on pelletized zeolites (ADZ300, ADZ400, and ADZ500) in fixed bed. The breakthrough curves of water vapor with several different concentrations and temperature in the range of 25~45 $^{\circ}C$ on zeolite bed were investigated. In the same conditions, the breakthrough time on ADZ400 and ADZ500 were little longer than ADZ300, and the equilibrium adsorption capacity on ADZ500 was highest. The higher the concentration of water vapor was, the faster the breakthrough time was, and the slope of breakthrough curves showed a tendency to increase. The faster the flow rate of water vapor was, the faster the breakthrough time was relatively, but variations between flow rate and breakthrough time did not have a proportional relationship. The breakthrough curve maintained constant gradient in spite of variation of flow rate in the same concentration. The temperature rise in zeolite bed by adsorption heat was occurred in the early stage of adsorption. After water molecule layers were formed on the surface of zeolite, the temperature was slowly cooled by water vapors continuously flowed in as constant temperature. The greater the concentration of water vapor and adsorption temperature were, the temperature difference in zeolite bed was increased.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.432-435
• /
• 1996

The performance of one-column isothermal PSA process is assessed by dynamic simulator, gPROMS. The four-step and five-step processes are compared. A five-step process is employed in order to show the effect of the addtional cocurrent depressurization step on the four-step PSA process. Two processes parameters, purity and recovery of SO$_{2}$ are used for the performance comparison. The results of dynamic simulation show that four-step process is superior to five-step process in recovery, but not in purity.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.43-51
• /
• 2006

Starch is widely used as an adhesive material in the paper and corrugated board industry. The adhesion problem of corrugated board is categorized by two main parts called zipper board and white glue line. The object of this research is to investigate the factors affecting the adhesion problem by the gelatinization of various starch solutions and dynamic penetration properties measurements of various commercial base paper and handsheets. Flow property of starch solution is affected by sodium hydroxide addition and reaction level. Absorption property of commercial base papers and handsheets is affected by sizing and stock composition. Optimum bonding between top/bottom liners and corrugated medium is accomplished by acceptable flow viscosity of mixed starch solution and proper adsorption characteristic of base paper.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.205-224
• /
• 2023

The emission of off-gas streams from used fuel recycling is a concern in nuclear energy usage as they contain radioactive compounds, such as, ³H, ¹⁴C, ⁸⁵Kr, ¹³¹I, and ¹²⁹I that can be harmful to human health and environment. Radioactive iodine, ¹²⁹I, is particularly troublesome as it has a half-life of more than 15 million years and is prone to accumulate in human thyroid glands. Organic iodides are hazardous even at very low concentrations, and hence the capture of ¹²⁹I is extremely important. Dynamic adsorption experiments were conducted to determine the efficiency of sodium mordenite, partially exchanged silver mordenite, and fully exchanged silver mordenite for the removal of methyl iodide present at parts per billion concentrations in a simulated off-gas stream. Kinetic analysis of the system was conducted incorporating the effects of diffusion and mass transfer. The possible reaction mechanism is postulated and the order of the reaction and the values of the rate constants were determined from the experimental data. Adsorbent characterization is performed to investigate the nature of the adsorbent before and after iodine loading. This paper will offer a comprehensive understanding of the methyl iodide behavior when in contact with the mordenites.

• 대한의용생체공학회:의공학회지
• /
• 제14권4호
• /
• pp.307-314
• /
• 1993

Plasma protein adsorption is the first event in the blood-material interaction and influenc- es subsequent platelet adhesion towards thlㅈombus formation. Thiㅈomboembolic events are strongly influenced by surface characteristics of materials and fluid dynamics inside the blood pump. In vitro flow visualizaion and an amimal experiment with the moving actuator type TAH were Performed in order to investigate fluid dynamic effects on the protein adsorption. The diffel'encl level, j of shear rate inside the ventricle Lvere determined by consid- ering the direction of the major opening of four healt valves in the implanted TAH and the visualized flow patterns as well. Each ventricle of the explanted TAH was sectionalized into 12 segments according to the shear rate level. The adsorbed protein on each segment was quantified using the ELISA method after soaking in 2% (wye)SDS/PBS for two days. Adsorbed protein layer thicknesses Itvere measured by the Immunogotd method under TEM. The SEM observation show that right ventricle (RV) , immobilized with albumin, displayed different degrees of platelet adhesion on each segment, whereas the left ventricle (LV), grafted by PEO-sulronate, indicated nearly , iame platelet adhesion behavior, regardless of shear rates. The surface concentrations of adsorbed proteins in the low shear rate region are hlghel'than those in the high region, which was confirmed statistically. A modified adsorption model of plasma protein onto polyurethane surface was suggested by considering the effect of the fluid dynamic characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.337-341
• /
• 2001

A new method to extract gold from pyrite roster cinder, which combines ultra-fine-grinding with resin-in-pulp, has been studied in this paper. Compared with traditional leaching technology, it can short leaching time, avoid complex filter process, lower sodium cyanide consumption and increase gold recovery by 35%. During leaching, aluminium oxide ball was used as stirred medium, hydrogen peroxide as leaching aid and sodium hexametaphosphate as grinding aid. With the high efficiency and chemistry effect of ultra-fine-grinding, the leaching process was developed and the gold leaching rate may reach 88%. With AM-2 Б resin as abosorber and sulfocarbamide (TU) as eluent, gold was recovered from cyanide pulp by resin-in-pulp. AM-2 Б resin has good adsorbability in cyanide solution(pH=10). It was easy to elude gold from the loaded resin with 0.1㏖/L cholhydric acid and 1㏖/L sulfocabamide. The effect of contact time, temperature and acidity etc. on the gold absorption had been examined with static methods. The results showed that the adsorption and desorption of gold could both reach over 98%. The effects of flow rate of solution on dynamic adsorption and elution of gold had been examined with dynamic methods. Breakthrough curve and elution curve had been drawn in this paper. A mild condition was determined through a number of experiments: leaching time 2 hours, liquid solid ratio 4:1, sodium cyanide 3kg/t, hydrogen peroxide 0.05%, sodium hexametaphosphate 0.05%; adsorption time 30 minutes, temperature 10-3$0^{\circ}C$, resin($m\ell$) solid(g) ratio 1:10, eluent resin ratio 10-20:1, velocity of eluent $1.5m\ell$/min. Under the mild condition, the gold recovery may reach 85%.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.230-235
• /
• 2005

2'-deoxyribonucleosides중에서 dUrd(2'-deoxyuridine), dGuo(2'-deoxyguanosine), dAdo(2'-deoxyadenosine)의 단일 및 다성분계의 흡착평형식을 동적방법으로 구하기 위해 물과 메탄올(90/10, vol%)을 이동상으로 하는 역상 액체 크로마토그래피를 사용하였다. 시료의 주입부피가 증가함에 따라서 체류시간이 짧아지고 피크가 삼각형 모양을 보여서, Langmuir 흡착평형식으로 가정하였다. PIM (pulsed-input method)에 의해서 Langmuir 흡착평형식의 매개변수를 구하고, 경쟁적인 다성분계의 흡착평형식을 사용하였다. 체류시간이 짧은 dUrd와 dGuo의 경우에서는 단일 및 다성분계에서 실험값과 계산값이 잘 일치하였지만, 가장 늦게 용출되는 dAdo에서는 비이상 비선형적인 특성으로 인해서 약간의 오차가 있었다.