• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.146-170
• /
• 2017

Joint channel assignment and routing is a well-known problem in multi-radio wireless mesh networks for which optimal configurations is required to optimize the overall throughput and fairness. However, other objectives need to be considered in order to provide a high quality service to network users when it deployed with high traffic dynamic. In this paper, we propose a re-configuration optimization model that optimizes the network throughput in addition to reducing the disruption to the mesh clients' traffic due to the re-configuration process. In this multi-objective optimization model, four objective functions are proposed to be minimized namely maximum link-channel utilization, network average contention, channel re-assignment cost, and re-routing cost. The latter two objectives focus on reducing the re-configuration overhead. This is to reduce the amount of disrupted traffic due to the channel switching and path re-routing resulted from applying the new configuration. In order to adapt to traffic dynamics in the network which might be caused by many factors i.e. users' mobility, a centralized heuristic re-configuration algorithm called State-Aware Joint Routing and Channel Assignment (SA-JRCA) is proposed in this research based on our re-configuration model. The proposed algorithm re-assigns channels to radios and re-configures flows' routes with aim of achieving a tradeoff between maximizing the network throughput and minimizing the re-configuration overhead. The ns-2 simulator is used as simulation tool and various metrics are evaluated. These metrics include channel-link utilization, channel re-assignment cost, re-routing cost, throughput, and delay. Simulation results show the good performance of SA-JRCA in term of packet delivery ratio, aggregated throughput and re-configuration overhead. It also shows higher stability to the traffic variation in comparison with other compared algorithms which suffer from performance degradation when high traffic dynamics is applied.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.131-134
• /
• 2000

Only MAC protocol can satisfy the service quality of the request of bandwidth, delay time, and cell loss at the same time and it is because MAC protocol provides mobile terminal an environment to use channel evenly and effectively This Paper has been adapted Mobile ATM Standardization of ETSI in maximum and used not only for practicing in-band signal to a priority order but also to the next reserved slot assignment of the dynamic frame. Also, by accepting VBR traffic more adaptively, the effectiveness of transmission channel has been maximized as well, and these are compared with the old way of it and analyzed to confirm the effectiveness.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.77-88
• /
• 2003

This paper proposes a solution algorithm for solving a multi-class analytical DTA model. In the DTA model, three traveler classes are classified according to different assumptions of traveler's route choice behavior: including fixed route, Stochastic Dynamic User Optimum(SDUO), and Dynamic User Optimum(DUO). To solve this DTA model, variables of link flow and exit flow are represented solely by inflow. The resulting Linear Program(LP) subproblem in the inner iteration is solved as a typical time-dependent shortest route problem over a physical network. Accordingly, the required time-space network expansion in solving DTA models is no longer needed.

• Proceedings of the KOR-KST Conference
• /
• 1995.12a
• /
• pp.111-124
• /
• 1995

첨단 교통 체계(Intelligent Transport Systems)의 중요한 요소인 첨단 교통 관리 체계(Advanced Traffic Management Systems)의 성공 여부는 교통정보를 어떻게 제공하고 통제하는데 의존하다. 즉, 정보 제공 방식과 이데 대한 운전자의 반응을 정확하게 파악하고 예측하여야 ITS를 성공적으로 구축할 수 있다. 이 논문에서는 동적 차량 길잡이 장치의 효용성을 평가하기 위한 확률적 통행배정모형을 개발하는 것이다. 개발된 통행배정모형은 운전자의 동적행태조정(Dynamic Behavioural Adjustment)을 명백하게 확솔 과정(Stochastic Process)으로 표현하여 기존의 모형에 비해 통해자들의 행태를 더욱 실제적으로 반영한다. 특히, 각 통행자들에게 K개의 최소경로시간을 제공해줌으로 인하여 통행자의 노선선택에 대한 선택폭을 증가시켜준다. 통행경로의 선택폭의 증가는 쟁점으로 대두되는 문제(교통항제소에서는 차량 길잡이 보유 운전자에게 체계최적(System Optimum)와 이용자최적(User Equilibrium)중 어떠한 원칙하에 교통정보를 제공하여야 하는가에 대한 해결 방안이다. 왜냐하면 만약 교통급제소에서 운전자에게 통행정보를 체계 최상을 하기 위해 정보를 제공하고자 하면, 길잡이 장착 운전자는 더 이상 제공된 정보를 따르지 않고 자기 스스로의 경에 의해 이용자 최상을 달성하고자 할 것이다. 이 논문의 목적은 이러한 복잡한 통행자의 경로선택행위를 반영하는 확률적 평형 통행 배정 모형을 여러가지 통계기법을 도입하여 개발하는 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1238-1244
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. In these networks the optical hardware in the RN is very simple, but a multiple access protocol is needed for upstream traffic control. On the other hand, the role of communications is already well established in the office environment. With the advent of cheap, affordable broadband communications and the increasing complexity of consumer electronics, it seems natural to extend the network into the home. As the application of Home Area Network is ever increasing, we therefore consider connectivity between access network and home network which generates various traffic to design MAC protocol over residential network. Global-FIFO is quite simple and allows dynamic upstream bandwidth assignment on the basis of a request-and-permit mechanism. It has good bandwidth efficiency and being cell-based, it does not consider the various traffic from home network. In this paper, we design and analyze the new MAC resource assignment algorithm called MQ-FIFO (Multiple Queue-FIFO) that provides good performance under the environment of ATM-PON and Home Network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.370-379
• /
• 2014

Recently, the interest in optical network with multifiber link is continuing to rise since the network traffic has been growing exponentially. However, growing traffic in network leads to increasing the energy consumption of the network equipment. In this paper, we propose a dynamic routing and wavelength assignment (RWA) algorithm based on V-like cost function and layered graph to improve energy efficiency in IP over WDM network with multifiber link. The V-like cost function is used to decide the fiber cost according to the number of used wavelengths. The layered graph with multifiber link is used to select the energy efficient route and wavelength. The proposed RWA algorithm is compared and analyzed with conventional algorithm in view of average power consumption and blocking probability through OPNET modeler.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.724-728
• /
• 1995

A new dynamic channel assignment (DCA) algorithm with rearrangement for cellular mobile communication systems is suggested. Our DCA algorithm is both traffic and interference adaptive, which is based on the mathematical formulation of the maximum packing under a realistic propagation model. In developing the algorithm, we adopt the Lagrangean relaxation technique that has been successfully used in the area of mathematical programming. Computational experiments of the algorithm reveal quite encouraging results. Although our algorithm primarily focuses on microcellular systems, it can be effectively applied to conventional cellular systems under highly nonuniform traffic distributions and interference conditions.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.101-110
• /
• 2002

This study first explains general features of traffic assignment models and network loading methods, and investigates the relationship between them. Then it introduces a dynamic network loading method, which accounts far time variable additionally. First of all, this study suggests that it is important to consider some requirements for the dynamic network loading, such as causality, FIFO(First-In-First-Out) discipline, the flow propagation, and the flow conservation. The details of dynamic network loafing methods are explained in the form of algorithm, and numerical examples are shown in the test network by adopting deterministic queuing model for a link Performance function.

• Journal of Korean Society of Transportation
• /
• v.15 no.2
• /
• pp.51-66
• /
• 1997

실시간 변화하는 교통상황을 파악하고 교통혼잡을 완화시키려는 각종 교통정책들을 개발하고 평가하기 위하여 동적 통행배정모형에 대한 연구가 지속되고 있으며 상당한 성과 를 이루고 있다. 그러나 이론적인 어려움과 계산량과 과다로 기존의 모형들은 대부분 단순 가로망을 대상으로 적용되어 왔으며 대규모 가로망에 적용하는 데는 상당한 어려움을 겪고 있다. 본 연구의 목적은 실제 가로망에 쉽게 적용할 수 있는 휴리스틱 동적 통행배정모형을 개발하고 이를 해석할 수 있는 알고리즘을 개발하는 데 있다. 개발되는 모형은 변동부등식 (variational inequality)으로 구축되며 알고리즘은 휴리스틱 알고리즘(heuristic disagonalized algorithm)을 개발한다. 예제 가로망을 대상으로 개발된 모형을 평가하며 도출된 해가 Wrdrop의 균형해(equilibrium)임을 보인다.