• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1098-1104
• /
• 2011

본 연구에서는 주행하는 차량에서 관심 도로면의 형상을 재현할 수 있는 시스템을 제안하였다. 차체에 부착된 센서로부터 측정된 신호에 혼입된 차량의 동적 거동 영향을 배제하고 형상 정보를 재현할 수 있는 멀티 센서 시스템을 적용하였고, Lab 실험을 수행하여 센서부에 인가되는 동적 외란에 대해서도 강건한 성능을 검증하였다. 실제차량에 시스템을 구현하여 다양한 도로면에 대한 검증 실험을 수행하였으며 해석적 노면 모델과의 비교를 통하여 그 효용성을 제시하였다.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.755-764
• /
• 1999

In this study, the system level network simulation is considered with adaptive array antenna in CDMA mobile communication system. A network simulation framework is implemented based on IS-95A/B system to consider dynamic handoff, system level network behavior, and deploying strategy into the overall CDMA mobile communication network under adaptive array algorithm. Its simulation model, such as vector channel model, adaptive beam forming antenna model, handoff model, and power control model, are described in detail with simulation block. In order to maximize SINR of received signal at antenna, maximin algorithm is particularly considered, and it is computed at each simulation snap shot with SINR based power control and handoff algorithm. Graphic user interface in this system level network simulator is also implemented to define the simulation environments and to represent simulation results on real mapping system. This paper also shows some features of simulation framework and simulation results.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.769-776
• /
• 2010

The ultracapacitor module has recently been recast for use in hybrid energy storage systems (HESSs). As a result, accurate state-of-charge (SOC) estimation for an ultracapacitor module is as important as that of primary sources in order to be utilized efficiently in an energy storage system (ESS). However, while SOC estimation via the open-circuit voltage (OCV) method is generally used due to its linear characteristics compared with other ESSs, this method results in many errors in cases of highcurrent charging/discharging within a short time period. Accordingly, this paper introduces a dynamic SOC estimation algorithm that is capable of SOC compensation of an ultracapacitor module even when there is a current input and output. A cycle profile that simulates the operating conditions of a mild-HEV was applied to a vehicle simulator to verify the effectiveness of the proposed algorithm.

• 방송공학회논문지
• /
• 제19권4호
• /
• pp.510-520
• /
• 2014

IEEE 802.11n 무선랜은 여러 개의 MPDU를 집적하여 하나의 PPDU(Physical Layer Protocol Data Unit)로 전송하는 A-MPDU(Aggregate - MAC Protocol Data Unit) 방식의 매체 접근 제어(MAC: Media Access Control) 프로토콜을 사용하여 높은 처리율을 지원하고 있다. 기존에는 채널 환경에 따라 집적하는 MPDU의 개수를 동적으로 바꿔주는 채널 정보 기반의 A-MPDU 방식이 많이 연구되었지만 이러한 방식들은 수신자로 부터의 복잡한 무선 채널 정보를 이용하기 때문에 시스템 오버헤드가 증가한다. 따라서 본 논문에서는 이러한 문제점을 해결하기 위해 복잡한 무선 채널 정보를 이용하지 않고 A-MPDU내의 MPDU 수신여부를 나타내는 BA 신호를 이용해 작은 오버헤드를 가지고도 A-MPDU내의 집적된 MPDU의 개수를 동적으로 결정하는 BA 기반 동적 A-MPDU 방식을 제안하였다. 본 논문에서는 NS-2(Network Simulator-2)에 의한 모의실험을 통하여 제안된 방식이 기존의 고정 A-MPDU 방식보다 더 높은 처리율과 더 낮은 패킷 오류율을 가짐을 확인하였다.

• 한국정밀공학회지
• /
• 제6권2호
• /
• pp.65-76
• /
• 1989

The objective of this paper is to design the variable structure system(VSS) controller for the tracking control of excavator which is driven by electro-hydraulic servomechansim. It is generally agreed that the dynamic characteristics of the robot arm such as excavator are coupled, time varying, and highly nonlinear, and also hydraulic system contains nonlinear characteristics in itself, so performing exact position control and trajectory tracking control need remarkable consideration. To solve this porblem, this system was designed as a variable structure system. The salient feature of VSS is that the sliding mode occur on a switching surface. While in sliding mode, the system remains insensitive to parameter variations and disturbances. This control algorithm was applied to a hydraulic excavator by simulaltion and to a simulator by experiment. And its effectiveness was verified. And the results of VSS for the electro-hydraulic excavator was compared with that of the PID when load disturbances and system parameter variations exist.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.593-602
• /
• 2004

We have developed a digital control rod control system not only to improve its performance but also to improve its reliability and speed of response so that it can replace the old fashioned analog system. However, a new developed digital control system should be tested to prove the validity by using any prototype or mock-up before application. The reliability prediction and the reliability block diagram analysis methods were adopted to verify the reliability of the developed hardware. For the case of software, especially fur a new developed control algorithm it has been tested to prove performances and validation by using a dynamic simulator and mock-up of control rod drive mechanism altogether. Here we want to present some key factors regarding to the new developed digital system with some verification procedures.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.91-97
• /
• 2010

동역학 행렬 제어(Dynamic Matrix Control) 기법은 각종 산업 현장에서 가장 활발하게 적용되고 있는 고급 제어 기법으로, 최근에는 공정제어의 표준 기법으로 인식되고 있다. 일반적으로 동역학 행렬 제어에서는 대상 플랜트의 거동을 묘사하기 위하여 계단 응답 모델을 이용한다. 본 논문에서는 화력발전의 관류 보일러-터빈 시스템에 동역학 행렬 제어 기법을 적용한 결과를 제시한다. 먼저 제어를 위해 두 개의 입력변수로 스프레이와 댐퍼를 선정한 후, 두 개의 주요 출력 변수에 대한 계단 응답 모델을 생성하였다. 그 후, 생성된 2 입력 - 2 출력 계단 응답 모델을 바탕으로 한, 동역학 행렬 제어의 최적화 계산을 통해 매 순간 보일러 스팀 온도를 제어하는 구조의 제어기를 설계하였다. 제시된 제어기를 두산(주)의 보일러 시뮬레이션 모델인 APESS에 적용한 결과 만족할 만한 제어 성능을 나타냄을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.991-992
• /
• 2006

Multiprocessor system is efficient and high performance architecture to overcome a limitation of single core SoC. In this paper, we propose a multiprocessor SoC (MPSoC) architecture which provides the low complexity and the high performance. The dynamic routing scheme has a serious problem in which the complexity of routing increases exponentially. We solve this problem by making a cluster with several PEs (Processing Element). In inter-cluster network, we use deterministic routing scheme and in intra-cluster network, we use dynamic routing scheme. In order to control the hierarchical network, we propose efficient router architecture by using smart crossbar switch. We modeled 2-D mesh topology and used simulator based on C/C++. The results of this routing scheme show that our approach has less complexity and improved throughput as compared with the pure deterministic routing architecture and the pure dynamic routing architecture.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.114-122
• /
• 2009

An adaptive Kalman filter is designed as a post-navigation filter to improve the accuracy of GPS receiver's navigation performance in high dynamic environments. Not only the adaptive Kalman filter reduces the large noise error of navigation data which is obtained by least square method, but also the filter is not degraded as normal Kalman filter in high acceleration movements because the system noise is estimated. Also an initialization structure of the filter is desisted in consideration for irregular output condition of navigation data by least squared method such as reacquisition status in GPS receiver. The filter performance is verified by GPS simulator which has the simulation capability of high velocity and acceleration. Finally, a vehicle test including DGPS is executed to conform the real improvement of that filter performance. This filter can be applied to various data measurement systems to improve accuracy in high dynamic conditions besides GPS receiver.