• 자원환경지질
• /
• 제50권2호
• /
• pp.145-157
• /
• 2017

최근 집중강우로 인하여 전국적으로 산사태 및 사면붕괴 현상이 빈번히 발생하고 있다. 이러한 산지 및 비탈면에서 발생하는 자연재해에 대한 대책안 마련 및 설계 입력자료로서 지반의 강도정수(전단강도)를 도출해야만 한다. 그러나 현재 산지 및 비탈면에 접근하여 지반조사를 하기 위해서는 과다한 산림훼손과 많은 경제적인 비용 등이 요구되어진다. 따라서 본 연구에서는 현장에서 인력운반이 가능한 경량화된 소형동적콘관입시험기를 제작하여 다수의 지역에 대한 지반의 특성 및 강도정수를 산출하였다. 그리고 국내 및 외국의 소형동적콘관입시험 방법에 대해서 연구 분석하여 국내에 적합한 콘 재료와 시험방법을 제안하였으며, 대표적인 지역을 대상으로 현장에서 콘관입시험 Nc값과 표준관입시험 N값과 비교 분석하였다. 이와 더불어 직접전단시험 및 공내전단시험을 실시하여 토층심도별, 기반암별, 흙의 분류별 그리고 #200번체 통과량별로 Nc값과 전단강도와의 상관관계를 분석하였다. 특히 본 연구에서는 산지조건에서 가장 많이 분포하는 사질토를 대상으로 Nc값에 대응하는 전단강도(점착력 및 내부마찰각)와의 상관식을 제안하여 산지 토층에 대한 효율적인 지반강도정수를 산출하도록 하였다.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.25-32
• /
• 2002

Structural and dynamic analyses of inducer and impeller for an oxidizer turbopump are peformed to investigate the safety level of strength and vibration at a design point. Due to high rotational speed of turbopump, effects of centrifugal forces are carefully considered in the structural analysis. Hydrodynamic pressure is also considered as an external force applied to inducer and impeller blades. A three-dimensional Finite Element Method (FEM) is used for linear and nonlinear structural analyses with modified Newton-Raphson iteration method. After the nonlinear trim solution is obtained from the structural analysis, dynamic characteristics are obtained as a function of rotational speed from the linearized eigenvalue analysis at an equilibrium position. According to the results of numerical analysis, the safety margins of strength and vibration resonances are sufficient enough for safe operation within the requited life cycle.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.59-64
• /
• 2002

When the vehicle travels in an actual road, resistance spot weldments of the vehicle structure are exposed to complex loading state. Since the fatigue strength in resistance spot weldment of vehicle body can be determined by effect of residual stresses and loading state of driving, estimating actual loading state and considering residual stress effect are needed. In this study, Fatigue stress-fatigue life relation concerned residual stress effect was obtained by thermo elastic plastic finite element analysis. And applied loading in resistance spot weldments of vehicle body was calculated by dynamic analysis. Presumption of fatigue life was performed using proposed method

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.271-278
• /
• 2001

Structural and dynamic analyses of inducer and impeller for a oxidizer turbopump are peformed to investigate the safety level of strength and vibration at design point. Due to high rotational speed of turbopump, effects of centrifugal forces are carefully considered in the structural analysis. Hydrodynamic pressure is also considered as an external force applied to inducer and impeller blades. A three dimensional finite element method(FEM) is used for linear and nonlinear structural analyses with modified Newton-Raphson iteration method. After the nonlinear trim solution is obtained from the structural analysis, dynamic characteristics are obtained as a function of rotational speed from the linearized eigenvalue analysis at an equilibrium position. According to the results of numerical analysis, the safety margins of strength and vibration resonances m sufficient enough to be operated safely within the required life cycle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.187-191
• /
• 2003

Aluminum carbody for rolling stocks is light and perfectly recycled, but includes severe defects which are very dangerous to fatigue strength. Static load test has been performed up to date to assess structural safety of the carbody. However, static load test is not sufficient to evaluate fatigue strength of the carbody, because fatigue failure is caused by dynamic load. In this study, the established load test methods for carbody are described and the characteristics of the methods are discussed. Also, a testing method to simulate dynamic loading condition is proposed for evaluation of fatigue strength of the carbody The results by the proposed testing method are compared with the results by the static load test and new findings are discussed.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.58-63
• /
• 2010

The purpose of this study is to develop improved boom structures with reliable fatigue strength of weldment and lower production cost. For that purpose, multibody dynamic analysis was performed to evaluate forces acting on arm & boom cylinders and joints of boom structure during operation of an excavator for three working postures, then stress analysis was made to investigate stress distribution around diaphragms at the bottom plate of boom structures which was known to be susceptible to fatigue failures of welded joints, and finally boom structure with optimum arrangement of diaphragms was proposed. This work basically consists of the following two parts: part 1 focuses on multibody dynamic analysis of excavators during operation and part 2 includes evaluations of fatigue strength of welded joints for modified boom structures.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.83-89
• /
• 2002

The purpose of this study is to obtain the basic data for the development of construction material products using non-active Hwangto and stone dust. The test result shows that the unit weight is in the range of 2,050~2,135 kg/m$^3$, the compressive strength is in the range of 107~451 kgf/cm$^2$, the bending strength is in the range of 23~81 kgf/cm$^2$ and the dynamic modulus is in the range of 137$\times$10$^3$~318$\times$10$^3$ kgf/cm$^2$. Also, it is decreased with increase using the non-active Hwangto and stone dust, respectively. The incorporation of non-active Hwangto for cement is possible to 40% in strength.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.81-83
• /
• 2007

Cryogenic rolling combined with warm rolling has been found to be more effective than only cryogenic rolling procedure in improving the strength of a 5052 Al alloy. In this study, cryo-rolled 5052 Al alloys were aged at $175^{\circ}C$. Warm rolling was conducted after dipping plates into silicon oil bath. A notable increase of tensile strength is achieved by the precipitation during warm rolling. The mechanical behavior of this alloy was investigated by hardness and tensile tests. The microstructure was investigated by transmission electron microscopy. It was found that the cryogenic rolling combined with warm rolling was very effective in improving tensile strength.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.61-66
• /
• 2011

The purpose of this study is to develop improved boom structures with reliable fatigue strength of weldment and lower production cost. For that purpose, multi-body dynamic analysis was performed to evaluate forces acting on arm & boom cylinders and joints of boom structure during operation of an excavator for three working postures, then stress analysis was made to investigate stress distribution around diaphragms at the bottom plate of boom structures which was known to be susceptible to fatigue failures of welded joints, and finally boom structures with optimum arrangement of diaphragms was proposed. This work mainly consists of the following two parts: part 1 focuses on multi-body dynamic analysis of excavators during operation and part 2 includes evaluations of fatigue strength of welded joints for modified boom structures.

• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.34-41
• /
• 2000

The analysis of static and dynamic characteristics of reinforced roadbed materials was performed through model and laboratory tests. The strength characteristic of reinforced roadbed materials such as HMS-25 and soil were investigated through the unconfined axial compression test, the model soil box test and the combined resonant column and torsional shear test. The unconfined axial compression strength of HMS-25 shows a steady increasement in strength due to the chemical hardening reaction between HMS-25 and water. The result of model soil box test reveals that railroad roadbed of HMS-25 is better than that of soil in several aspects, such as, bearing capacity and settlement. The combined resonant column and torsional shear test result indicates that shear modulus of HMS-25 and soil increase with the power of 0.5 to the confining pressure and linear relationship to normalized shear modulus and damping ratio.