• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2972-2979
• /
• 2000

Dynamic characteristics of powder metal is very important to mechanical structures requiring high strength or endurance for impact loading. But owing to distinctive property of powder metal, that is relative, it has been investigated restrictively compared to static characteristics. The objectives of this study is to investigate dynamic characteristics of powder metal and compare it to a fully density material. To find the characteristics, an explicit finite element method is used for simulation of Split Hopkinson Pressure Bar experiment based on the stress wave propagation theory. We obtained a dynamic stress-strain relationship and dynamic behavior of powder metal, as well as the variation of material properties during dynamic deformation.

• 한국정보과학회논문지:데이타베이스
• /
• 제33권4호
• /
• pp.396-408
• /
• 2006

시간의 흐름에 따라 누적되는 대용량의 과거 위치를 관리하는 이동 객체 데이타베이스에서 이동 객체의 과거 위치를 효율적으로 검색하기 위해서는 이동 객체의 특성을 고려한 색인 구조가 필요하다. 그러나, 영역 질의 성능이 우수한 다차원 색인인 KDB-tree를 이동 객체 데이타베이스에 적용할 경우 시간 도메인이 증가하는 이동 객체 데이타베이스의 특성으로 인해 공간 도메인 가중 분할이 발생한다. 공간 도메인 가중 분할은 하나의 노드가 차지하는 MBR의 공간 영역이 분할 횟수에 반비례하게 감소되어 시공 간 영역 질의 처리시 색인의 검색 비용을 증가시키는 문제가 있다. 이 논문에서는 이동 객체 데이타베이스에서 시공간 영역 질의를 효율적으로 처리하기 위한 KDB-tree의 동적 분할 정책을 제안한다. 동적 분할 정책은 공간 우선 분할 방법을 적용하는 분할 도메인 선정 방법과 포인터 페이지에서 공간 활용도를 최대화시킬 수 있는 최근 시간 분할 정책, 영역 페이지에서 적용되는 최후 시간 분할 정책으로 구성된다. 제안한 동적 분할 정책의 성능을 평가하기 위해 3DR-tree, MV3R-tree, KDB-tree와의 성능을 비교한다. 영역 질의를 위한 성능 평가에서 동적 분할 정책을 적용한 MKDB-tree는 기존 색인에 비해 평균 30% 이상의 노드 접근 회수를 감소시킨다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.634-637
• /
• 2004

This paper presents a Split Hopkinson Pressure Bar(SHPB) technique to obtain compressive stress-strain data for rubber materials. An experimental technique that modifies the conventional Split Hopkinson Pressure Bar(SHPB) has been developed for measuring the compressive stress-strain responses of materials with low mechanical impedance and low compressive strengths such as rubber. This paper introduces an all-polymeric pressure bar which achieves a closer impedance match between the pressure bar and the specimen materials. In addition, we are a pulse shaper to lengthen the rising time of the incident wave to ensure stress equilibrium and homogeneous deformation of a rubber materials. It is found that the modified technique can be determine the dynamic deformation behavior of an NBR rubber more accurately.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.359-367
• /
• 2012

In this paper, the input split type series-parallel hybrid electric vehicle (SPHEV) is established and the interpretation of the dynamic characteristics in four kinds of HEV modes, such as electric vehicle mode, engine mode, hybrid mode, and regeneration mode, is described. For this research, the forward-facing approach simulation method is chosen, which is useful for vehicle dynamic analysis. The rating of each powertrain component is designed based on energy-based concept and electrical peaking hybrid (ELPH) method. Finally, the designed powertrain is evaluated with the developed PSiM simulator and simulation results are shown.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.795-798
• /
• 1997

This study is about the dynamic behavior of steel(SM45C). Dynamic tests were performed using SHPB(Split Hopkinson Pressure Bar) which is designed and modified to be used in both tensile and compressive modes. Quasi-static compression tests were also carried out for the comparison to the dynamic results. Not only the dynamic mechanical properties but also the effect of the notch of the specimen on stress-strain curve were investigated. The dynamic test results reveal that strain and stress are sensitively affected by the notch. The depth and the number of notch increase the stress and decrease the strain.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.371-376
• /
• 2004

It is well known that a specific experimental method such as the Split Hopkinson Pressure Bar (SHPB) technique is the simplest experimental technique to determine the dynamic material properties under the impact compressive loading conditions with strain-rate of the order of $10^3/s{\sim}10^4/s$. This type of experimental procedure has been widely used with proper modification on the test setups to determine the varying dynamic response of materials for the dynamic boundary conditions such as tensile and fracture as well. In this paper, dynamic compressive deformation behaviors of an Ethylene Copolymer materials widely used for the isolation of vibration from varying structures under dynamic loading are estimated using the SHPB technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.945-950
• /
• 2001

Vacuum interrupters that is used in various switchgear components such as circuit breakers, distribution switches, contactors, etc. spreads the arc uniformly over the surface of the contacts. The electrode of vacuum interrupters is used sintered Cu-Cr material satisfied with good electrical and mechanical characteristics. Because the closing velocity is 1-3m/s, the deformation of the material of electrodes depends on the strain rate and the dynamic behavior of the sintered Cu-Cr material is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain-rate is obtained from the split Hopkinson pressure bar test using cylinder type specimens. Experimental results from both quasi-static and dynamic compressive tests with the split Hopkinson pressure bar apparatus are interpolated to construct the Johnson-Cook equation as the constitutive relation that should be applied to simulation of the dynamic behavior of electrodes. To evaluate impact characteristic of a vacuum interrupter, simulation is carried out with five parameters such as initial velocity, added mass of a movable electrode, wipe spring constant, initial offset of a wipe spring and virtual fixed spring constant.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.158-165
• /
• 2003

A specific experimental method, the Split Hopkinson pressure bar (SHPB) technique has been widely used to determine the dynamic material properties under the impact compressive loading conditions with strain rate of the order of 10$^3$/s∼l0$^4$/s. In this paper, dynamic deformation behaviors of rubber materials widely used for the isolation of vibration from structure under varying dynamic loading are determined by using plastic SHPB technique. A transition point to scope with the dynamic deformation behavior of rubber-like material is defined in this paper and used to characterize the specifics of the dynamic deformation of rubber materials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권10호
• /
• pp.4007-4024
• /
• 2020

It is tremendously important to construct decision trees to use as a tool for knowledge representation from a given decision table. However, the usual algorithms may split the decision table based on each value, which is not efficient for numerical attributes. The methodology of this paper is to split the given decision table into binary groups as like the CART algorithm, that uses binary split to work for both categorical and numerical attributes. The difference is that it uses split for each attribute established by the directed acyclic graph in a dynamic programming fashion whereas, the CART uses binary split among all considered attributes in a greedy fashion. The aim of this paper is to study the effect of binary splits in comparison with each value splits when building the decision trees. Such effect can be studied by comparing the number of nodes, local and global misclassification rate among the constructed decision trees based on three proposed algorithms.

• Composites Research
• /
• 제31권5호
• /
• pp.221-226
• /
• 2018

변형률 속도 $100s^{-1}{\sim}10000s^{-1}$ 범위에서 사용되는 홉킨스바(SHPB)는 재료의 동석 거동 특성을 확인하기 위해 가장 널리 사용되는 장치이다. SHPB 시험은 입력봉 및 전달봉에서 측정된 변형률을 사용하여 시험편의 응력, 변형률 및 변형률 속도를 얻을 수 있는 응력파 전달 이론을 기반으로 한다. 본 연구에서는 고 변형률 속도에서 폴리프로필렌 자기보강 복합재료(SRPP)의 동적 특성을 얻기 위해 직접 SHPB를 설계 및 제작하였다. 또한 본 연구를 통해 제작된 SHPB에서 얻은 변형률 데이터의 신뢰성 확보를 위하여 Digital Image Correlation (DIC)를 통해 얻은 변형률 데이터와의 비교를 진행하였다. 이는 SRPP 시편의 고속 압축 시험을 통해 이루어 졌으며 SHPB를 통하여 얻은 데이터와 DIC를 통해 얻은 변형률 데이터의 유사함을 확인하였고 이를 통하여 장비의 신뢰성을 검증하였다.