• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.49-56
• /
• 2004

Today's popular ventilation systems include the combined jet fans and electrostatic precipitation systems or the combined jet fans and vertical shaft system. Tunnels with these two ventilation systems applied have been designed and opened, more and more interest has been put in maintenance of a tunnel after opening. Therefore. it is to become more important to come up with the optimal operation mode and the method for the evaluation of ventilation system. In this study, to evaluate a tunnel ventilation and its economy, a dynamic simulation program was developed which can simulate the unsteady-state tunnel air velocity and concentration of pollutants according to the traffic flow variations and operation condition of a ventilation system. We clarified the effectiveness usage on tunnel ventilation by using it and also we could found the most economical ventilation operation mode by application in real exit tunnel. We obtained that combination of fan system and electrostatic precipitation system was more economical than jet fan priority operation mode.

• Korean Journal of Health Education and Promotion
• /
• v.35 no.5
• /
• pp.1-16
• /
• 2018

Objectives: This study aimed to examine systems behavior of urban walking by analyzing a dynamic structure in Seoul, South Korea. Methods: As a systems thinking approach to urban walking and health promotion, we developed a Casual Loop Diagram based on literature review and expert consultation. The reviewed literature included: 1) qualitative studies that explores the experiences of urban walkers in Seoul; 2) a systematic review study on the built environmental factors related to walking; 3) policy research reports related to urban walking in Seoul. Results: The feedback structure for urban walking was related to the three urban environments (safety & walking environment, socioeconomic environment, and public transportation environment), and was characterized by a trade-off consisting of eight reinforcing loops and four balancing loops. Conclusions: The policies for a walkable city require multi-sectoral cooperation in order to change the causal loop structure related to the decline of walking. Therefore, it is necessary to establish legal and institutional conditions so that multi-sectoral and multidisciplinary approaches are possible.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.297-302
• /
• 2019

A-pillar is closely related to safety for the purpose of protecting the bodies of passengers by mitigating the impact that may be caused by the vehicle being overturned while driving. Therefore, the A-pillar should protect these parts from a variety of dynamic loads. This study result is thought to contribute for the strength and durability of A-pillar by designing two types of parts before making this product and analyzing the product which thickness is adjusted for the light weight of vehicle. If this study result is practically applied to the parts of A-pillar in a car, it is considered that the damage can be protected by the durability verification of design. By utilizing the data of analysis and design on the strength and durability of automotive A-pillar in this study, the esthetic sense can be given by being grafted onto the real automotive part.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.471-476
• /
• 2008

The superstructure type of the railway bridge in our country, is mainly classified into the box girder and the I-type girder. The box girder is widely used in the high speed railway bridge because of the safety due to dynamic behavior. The I-type girder is used in the conventional railway bridge, and is also divided into the general type and the composite type, and the newly modified types have been developed. According to the current railway bridge design code, the girder design by the span length in various types of railway bridge is performed in is study. The suitable girder height and the construction cost by the span length are analyzed, and the comparative analysis of the structural efficiency and the economical efficiency is carried out. From this study, the composite type girder is appeared the good result in respect of the structural efficiency. However, in the economical aspect, the general I-type girder is required less cost than the other types.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.211-218
• /
• 2021

A recent spread of personal mobility devices such as electric kickboards has brought about a rapid increase in accident cases. Such vehicles are susceptible to falling accidents due to their low dynamic stability and lack of outer protection chassis. This paper presents the development of an automatic emergency braking system and a safe starting system as driving assistance devices for electric kickboards. The braking system employed artificial intelligence to detect nearby threaening objects. The starting system was developed to disable powder to the motor until when the driver's boarding is confirmed. This study is meaningful in that it proposes the convergence technology of advanced driver assistance systems specialized for personal mobility devices.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.285-306
• /
• 2011

This paper analyzed the effects the regional competitiveness index on the characteristics of the regional growth. This study divides the regions in the US based on the static and dynamic standard of income for the characteristics of the regional growth. The results of the analysis are as follows. First some regions such as Alaska, Connecticut, Maryland, Massachusetts, Virginia, Washington and Wyoming have higher levels of SCI and both the rate of growth and per capita income than the national average. These are considered prosperous regions based on their high level of SCI. Second, in regards to the relation between the income level and regional competitiveness index for the regional growth, the variables such as human resource, science technology, business incubation, openness, safety and environmental policy are significant. Third, infrastructure, human resource, science technology and openness are the significant variables concerning the relation between the rate of income growth and regional competitiveness index for the regional growth.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.98-105
• /
• 2019

In order to improve the fuel economy and dynamic behavior of automobiles, the weight reduction tendency of automobile parts is obvious. Also, in order to maximize assembly and maintenance convenience, various parts are integrated and modularized. Multi-piece methods require many manufacturing processes and become a factor of lowering the strength of parts. It is advantageous to overcome the disadvantages by integrally manufacturing to reduce the processing steps and ensure the strength of the parts. However, when it is necessary to process in a narrow space inside the part, it is impossible to process with the existing spindle. The angle head spindle is only a component of a machine tool, but it is a core part that requires high technology and is highly utilizable in products requiring high precision machining. Therefore, various and continuous studies needs for angle head spindles in areas such as vibration absorption, operational safety, excellent dimensional stability, and strength. In this paper, we propose an optimal design for angle head spindle by performing structural analysis and shape optimization for angle head spindle gear and case.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.53-72
• /
• 2019

Safety measures for tower cranes are extremely important among the seismic countermeasures at high-rise building construction sites. In particular, the collapse of a tower crane from a high position is a very serious catastrophe. An example of such an accident due to an earthquake is the case of the Taipei 101 Building (the author was the project director), which occurred on March 31, 2002. Failure of the bolted joints of the tower-crane mast was the direct cause of the collapse. Therefore, it is necessary to design for this eventuality and to take the necessary measures on construction sites. This can only be done by understanding the precise dynamic behavior of mast joints during an earthquake. Consequently, we created a new hybrid-element model (using beam, shell, and solid elements) that not only expressed the detailed behavior of the site joints of a tower-crane mast during an earthquake but also suppressed any increase in the total calculation time and revealed its behavior through computer simulations. Using the proposed structural model and simulation method, effective information for designing safe joints during earthquakes can be provided by considering workability (control of the bolt pretension axial force and other factors) and less construction cost. Notably, this analysis showed that the joint behavior of the initial pretension axial force of a bolt is considerably reduced after the axial force of the bolt exceeds the yield strength. A maximum decrease of 50% in the initial pretension axial force under the El Centro N-S Wave ($v_{max}=100cm/s$) was observed. Furthermore, this method can be applied to analyze the seismic responses of general temporary structures in construction sites.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2018

Structures, systems and components of nuclear power plants should be able to maintain safety even in the event of design-basis accidents such as high-energy line breaks. The high-pressure steam jet ejected from the broken pipe may cause damage to the adjacent structures. The ANSI/ANS 58.2 code has been adopted as a technical standard for evaluating the jet impingement load. Recently, the U.S. NRC pointed out the non-conservativeness of the ANSI/ANS 58.2, because it does not take into account the blast wave effect, dynamic behavior of the jet, and oversimplifies the shape and load characteristics of the supersonic steam jet. Therefore, it is necessary to improve the evaluation method for the high-energy line break accident. In order to evaluate the behavior of supersonic steam jet, an appropriate numerical analysis technique considering compressible flow effect is needed. In this study, numerical analysis methodology for evaluating supersonic jet impingement load was developed and verified. In addition, the conservativeness of the ANSI/ANS 58.2 model was investigated using the numerical analysis methodology. It is estimated that the ANSI jet model does not sufficiently reflect the physical behavior of under-expanded supersonic steam jet and evaluates the jet impingement load lower than CFD analysis result at certain positions.