• Journal of Broadcast Engineering
• /
• v.24 no.2
• /
• pp.329-340
• /
• 2019

Recently, broadcasting technologies have evolved as high-quality AV services such as domestic terrestrial UHD(Ultra-High Definition) broadcasting have been increasing, and broadcasting standards have been newly defined. Also, as network technology develops, contents are consumed not only in the country but also the world. Accordingly, content insertion technology, which is a method of providing suitable contents in accordance with the national and local environments, will be needed. This paper proposes a content insertion service system model and synchronization scheme using ATSC(Advanced Television Systems Committee) 3.0 Event Signaling standard under heterogeneous network environment of broadcasting network and internet network based on transmission standard DASH(Dynamic Adaptive Streaming over HTTP)/ROUTE(Real time Object delivery Over Unidirectional Transport) and MMT(MPEG Media Transport) of terrestrial UHD broadcasting. It also verifies that the service operates in an environment that meets the broadcast standard.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.36-42
• /
• 2018

This paper considers the Marine Traffic Risk Assessment for fixed and moving targets, which threaten officers during a voyage. The Collision Risk Assessment Formula was calculated based on a dynamic ship domain considering the length, speed and maneuvering capability of a vessel. In particular, the Navigation Risk Assessment Model that is used to quantitatively index the effect of a ship's size, speed, etc. has been reviewed and improved using a hybrid combination of a vessel's dynamic area and the Collision Risk Assessment Formula. Accordingly, a new type of Marine Traffic Risk Assessment Model has been suggested giving consideration to the Speed Length Ratio, which was not sufficiently reflected in the existing Risk Assessment Model. The larger the Speed Length Ratio (dimensionless speed), the higher the CJ value. That is, the CJ value is presented well by the Speed Length Ratio. When the Speed Length Ratio is large, states ranging from [Caution], [Warning], [Dangerous] or [Very Dangerous] are presented from a greater distance than when the Speed Length Ratio is small. The results of this study, can be used for route and port development, including dangerous route avoidance, optimum route planning, breakwater width, bridge span, etc. as well as the development of costal navigation safety charts. This research is also applicable for the selection of optimum ship routing and the prevention of collisions for smart ships such as autonomous vessels.

• Journal of Korean Society of Transportation
• /
• v.11 no.1
• /
• pp.67-86
• /
• 1993

A formulation of dynamic traffic assignment between multiple origins and single destination was first introduced in 1987 by Merchant and Nemhauser, and then expanded for multiple destination in the late 1980's (Carey, 1987). Based on behavioral choice theory which provides proper demand elasticities with respect to changes in policy variables, traffic phenomena can be analysed more realistically, especially in peak periods. However, algorithms for these models are not well developed so far(working with only small toy network) and solutions of these models are not unique. In this paper, a new model is developed which keeps the simplicity of static models, but provides the sensitivity of dynamic models with changes of O-D flows over time. It can be viewed as a joint departure time and route choice model, in the given time periods(6-7, 7-8, 8-9 and 9-10 am). Standard multinomial logit model has been used for simulating the choice behavior of destination, mode, route and departure time within a framework of the incremental network assignment model. The model developed is workable in a PC 386 with 175 traffic zones and 3581 links of Seoul and tested for evaluating the exclusive use of Namsan tunnel for HOV and the left-turn prohibition. Model's performance results and their statistical significance are also presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.920-926
• /
• 2007

Establishing a fixed path for the message delivery through a wireless network is impossible due to the mobility. Among the number of routing protocols that have been proposed for wireless ad-hoc networks, the AODV(Ad-hoc On-demand Distance Vector) algorithm is suitable in the case of highly dynamic topology changes, along with ZigBee Routing(ZBR), with the exception of route maintenance. Accordingly, this paper introduces a routing scheme focusing on the energy efficiency and route discovery time for wireless alarm systems using IEEE 802.15.4-based ZigBee. Essentially, the proposed routing algorithm utilizes a cluster structure and applies ZBR within a cluster and DSR (Dynamic Source Routing) between clusters. The proposed algorithm does not require a routing table for the cluster heads, as the inter-cluster routing is performed using DSR. The performance of the proposed algorithm is evaluated and compared with ZBR using an NS2 simulator. The results confirm that the proposed Cluster-based AODV (CAODV) algorithm is more efficient than ZBR in terms of the route discovery time and energy consumption.

• Korean Journal of Metals and Materials
• /
• v.47 no.7
• /
• pp.397-405
• /
• 2009

The high strain rate deformation behavior of ultra-fine grained 5083 aluminum alloys prepared via equal channel angular (ECA) extrusion was investigated in this study. The microstructure of ECA extruded specimens consisted of ultra-fine grains, and contained a considerable amount of second phase particles, which were fragmented and distributed homogeneously in the matrix. According to the dynamic torsion test results, the maximum shear stress and fracture shear strain of the route A (no rotation) specimen were lower than those of route C ($180^{\circ}$ rotation) specimen since that adiabatic shear bands of $100{\mu}m$ in width were formed in the route A specimen. The formation of adiabatic shear bands was addressed by concepts of critical shear strain, deformation energy required for void initiation, and microstructural homogeneity associated with ECA operations.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.843-845
• /
• 2003

Shortest Path Problems are among the most studied network flow optimization problems, with interesting applications in various fields. One such field is the route determination service, where various kinds of shortest path problems need to be solved in location-based service. Our research aim is to propose a route technique in real-time locationbased service (LBS) environments according to user’s route preferences such as shortest, fastest, easiest and so on. Turn costs modeling and computation are important procedures in route planning. There are major two kinds of cost parameters in route planning. One is static cost parameter which can be pre-computed such as distance and number of traffic-lane. The other is dynamic cost parameter which can be computed in run-time such as number of turns and risk of congestion. In this paper, we propose a new cost modeling method for turn costs which are traditionally attached to edges in a graph. Our proposed route determination technique also has an advantage that can provide service interoperability by implementing XML web service for the OpenLS route determination service specification. In addition to, describing the details of our shortest path algorithms, we present a location-based service system by using proposed routing algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.745-747
• /
• 2004

배터리 파워는 모바일 애드 혹 네트워크(Mobile Ad hoc Network)에서 중요한 리소스이다. 기존의 라우팅 알고리즘에서는 노드의 파워를 on-off 시키는 방법으로 파워를 관리해왔다. 본 논문에서는 DSR (dynamic source routing)에서 route discovery, route maintenance를 할 때 각 노드의 배터리 파워 레벨을 고려하여 파워 레벨이 낮은 노드들은 RREP packet을 보내지 않음으로써 소스에서 데스티네이션까지의 경로를 오래 유지시킬 수 있고, 또한 파워 레벨이 높은 하나의 노드에 트래픽이 집중되지 않도록 하기 위해 큐(queue)에 담겨있는 트랜스미션패킷과 리시브 패킷의 수까지 고려하여 경로를 설정한다. 이 알고리즘을 이용함으로써 각 노드의 파워를 효율적으로 관리함은 물론, 전체 네트워크의 load 균형을 맞춤으로 네트워크의 수명을 길게 할 수 있다.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.241-249
• /
• 2001

The objective of this paper is to develop the optimal path algorithm for dynamic route guidance system in advanced traveler information system (ATIS). The travel time is forecasted in each path between network nodes. Floyd-Warshall algorithm is used to find the optimal route based on this forecasted travel time in dynamic traffic network. This algorithm is modified to apply the real traffic network that has left-turn restriction, U-turn, and P-turn. A big value is assigned to one of arcs in turn restriction and a virtual node is used to consider U-turn and P-turn for Floyd-Warshall algorithm.