• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.620-630
• /
• 1998

Conventional hot forging and thixoforging of Al 7075 alloy have been compared with respect to microstructures, formability and hardness. Two distinctive temperature-strain rate ranges for hot forging of Al 7075 alloy were observed from the results of simple compression tests with strain rates of 10-3∼101 sec-1 in the temperatures between $250^{\circ}C$ and $500^{\circ}C.$ In the dynamic recovery range (low temperature-high strain rate range) multi-stage forging was necessary to form a complex shape part due to the lack of formability. In the high temperature-low strain rate range, in which dynamic recrystallization takes place a complex shaped park could be formed by single-stage forging. About 50% cold working in the SIMA process was necessary to get a fine and homogeneous microstructures. Microstructural study suggest that thixoforged Al 7075 part has fine grains and homogeneous microstructures. Its hardness number is almost same to that of conventional hot forged part after aging treatment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2019

The optimal design parameters of a dynamic absorber (DA) in a machine body (that is considered as a rigid body) are discussed in this paper. The bounce and rotation motions of the rigid body have been controlled passively by a DA, which consists of a mass and a spring. The rigid body is subjected to a harmonically excited force and supported by linear springs at both ends. To define the motion of a rigid body with a DA, the equation of motion was expressed in the third-order matrix form. To define the optimal design conditions of a DA, the reduction of dynamic characteristics, represented by the amplitudes of bounce and rotation, and the transmitted powers, were evaluated and discussed. The level of reduction was found to be highly dependent on the location and spring stiffness of the DA.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.97-106
• /
• 2004

The paper making process itself is a typical nonlinear process with complicated dynamics. In the application of advanced control-methods especially for the grade change operations the nonlinear process is linearized to give suitable linear models to be used in the control strategies. However, the use of the linear model is limited within short range containing steady-state operating conditions for grade change operation. In this paper a bilinear model for the nonlinear grade change processes is presented. We can see that the dynamic behavior for grade change operations can be effective analyzed by using multivariable bilinear model.

• Journal of applied mathematics & informatics
• /
• v.6 no.2
• /
• pp.553-568
• /
• 1999

This paper is of concern to queueing analysis of the dynamic rate leaky bucket(LB) scheme in which the token generation interval changes according to the buffer state at a token generation epoch. Cell arrivals are assumed to follow a Markovian arrival process (MAP) which is weakly dense in the class of the stationary point processes. By using the embedded Markov chain method we obtain the probability distribution of the system state at a token generation epoch and an arbitrary time. Some simple numerical examples also are provided to show the effects of the proposed LB scheme.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1084-1088
• /
• 1995

In this paper, an electrostatic plate resonator with four corrugated bridges and another with four flat ones have been fabricated and tested by the electrostatic actuation. The resonators consist of one rigid plate and four bridges. Boron diffusion process and anisotropic etch process with EPW are mainly used to fabricate the resonators. The dynamic characteristics of the fabricated resonators are obtained by measuring the velocity of the center of the rigid plate using a laser vibrometer. The results show that the deflection of the resonator with the corrugated bridges is larger than the resonator with the flat ones. It has been confirmed that the corrugated structure releases the residual tensile stress in the bridges resulted from the diffusion process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.160-165
• /
• 2002

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density, which is an important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to present the improved design.

• Journal of Korea Technology Innovation Society
• /
• v.4 no.1
• /
• pp.64-78
• /
• 2001

The 21st century is characterized by knowledge-based economy or society. The most important features of this knowledge society are the close relationship between science and technology, and the birth of science-based technologies or industries. Bioindustry which is the core area in this era is a representative science-based industry(SBI). In SBIs including BT(biotechnology) and ICT(information and communication technology), the creation of scientific knowledge and the ability to capitalize on that are very important. The United States leadership in research across the spectrum of science and technology is the result of the success in both achieving high level of research and capitalizing on that enabled them to grow. Capitalization is the process that transforms the results of research into practical concrete national benefits. It is such a dynamic process that cant be clearly modeled. In this study, we propose the dynamic capitalization process for innovation of SBIs in terms of the fuel and engine and analyse our potential.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.145-150
• /
• 1999

In the nonlinear dynamic structural analysis, the given ground excitation as an input should be well defined. Because of the lack of recorded accelerograms in Korea, it is required to generate an artificial earthquake by a stochastic model of ground excitation with various dynamic properties rather than recorded accelerograms. It is well known that earthquake motions are generally non-stationary with time-varying intensity and frequency content. Many researchers have proposed non-stationary random process models. Yeh and Wen (1990) proposed a non-stationary stochastic process model which can be modeled as components with an intensity function, a frequency modulation function and a power spectral density function to describe such non-stationary characteristics. This paper shows the process to generate nonstationary artificial earthquake ground motions considering target design response spectrum chosen by ATC14.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.48-52
• /
• 2006

The drawability of AZ31B magnesium sheet is estimated at various temperatures (200, 250, 300, 350 and $400^{\circ}C$), and forming speed (20, 50, 100 mm/min), thickness (0.5, 0.8, 1.0, 1.4 mm). The deep drawing process of circular cup and square cup were used in forming experiments. Experimental and FEM analysis are performed to investigate drawability and affection of controlled blank holding force. Through the controlled blank holding force, drawability was improved. This result is verified by FEM analysis. Through the observation of microstructure, the main cause is investigated as a quantity of the dynamic recrystallization.

• Journal of Information Display
• /
• v.9 no.2
• /
• pp.5-8
• /
• 2008

Bottom gate thin film transistors (TFTs) with microcrystalline and amorphous Si (a-Si) double active layers (DAL) were fabricated. Since the process of DAL TFTs can use that of conventional a-Si TFTs, these DAL TFT process has advantages, such as low cost, large substrate, and mass production capacity. In order to analyze the degradation characteristics in saturation region for driving TFTs of active matrix organic light emitting diode, three different dynamic stresses were applied to DAL TFTs and a-Si TFTs. The threshold voltage shift of DAL TFTs and a-Si TFTs during 10,000 second stress is 0.3V and 2V, respectively. DAL TFTs were more reliable than a-Si TFTs.