• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.207-222
• /
• 2012

Recently, many consumer electronics manufacturers have produced 3D devices such as 3DTVs and 3D monitors as interests in a stereoscopic video service are getting increased. However, most of 3D services are focused on local storage or bandwidth guaranteed service since 3D stereoscopic video service require bandwidth more stable and larger. This property causes difficulties in seamless stereoscopic video streaming services under IP based open network environment that cannot guarantee quality of services. In order to achieve a seamless video streaming service the international standard organization MPEG (Moving Pictures Experts Group) has developed the adaptive HTTP streaming technology called as DASH (Dynamic Adaptive Streaming over HTTP). However, the DASH doesn't have obvious scheme which can express the two elementary video streams based service-compatible stereoscopic contents in one segment. Therefore, this paper proposes a scheme of efficient 3D adaptive streaming service based on the DASH, which covers not only frame-packing stereoscopic contents but also service-compatible ones. The 3D adaptive HTTP streaming scheme introduced in this paper is able to provide 3D contents with various qualities to user and also has benefit that single 3D content can be applied to a variety of devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1643-1651
• /
• 1999

Video-On-Demand (VOD) is expected to provide the user with interactive operations such as VCR functions. In particular, fast scan functions like “Fast Forward” of “Fast Backward” for a certain speedup playback are required. Since they require a significant amount of system resources, schemes to reduce bandwidth requirements for the network or disk are needed. In MPEG standard, Group-of-Pictures (GoP) is a random access unit which can be decoded independently. Since storing and transmitting a video stream based on GoP is efficient, it is practical to support fast scan functions based on GoP. In this paper, we present a dynamic transmission scheduling scheme to support fast scan functions with m-times normal playback rate for a stored video. The proposed scheme writes a transmission schedule whenever user requests a fast scan function. That is, the scheme constructs the data set to be smoothed by skipping GoPs according to a given speedup factor, and then writes the transmission schedule by applying a bandwidth smoothing. Finally, the scheme restarts the transmission of video data to a client according to the new schedule. The proposed scheme results in speeding up the playback rate by utilizing “GoP skipping”, and then reduces the computational overhead by applying a bandwidth smoothing based on GoP.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.52-58
• /
• 2009

If a moving target has a linear characteristics, the Kalman filter can estimate relatively accurate the location of a target, but this performance depends on how the dynamic status characteristics of the target is accurately modeled. In many practical problems of tracking a maneuvering target, a simple kinematic model can fairly accurately describe the target dynamics for a wide class of maneuvers. However, since the target can exhibit a wide range of dynamic characteristics, no fixed SKF(Simple Kalman filter) can be matched to estimate, to the required accuracy, the states of the target for every specific maneuver. In this paper, a new AKF(Active Kalman filter) is proposed to solve this problem The process noise covariance level of the Kalman filter is adjusted at each time step according to the study result which uses the neural network algorithm. It is demonstrated by means of a computer simulation that the tracking capability of the proposed AKF(Active Kalman filter) is better than that of the SKF(Simple Kalman Filter).

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.497-506
• /
• 2020

A chameleonic surface proposed in this study was a pin-art and 3D display device for generating arbitrary shapes. A smooth and continuous surface was formed using slim telescopic actuators and high-elasticity composite material. Realistic 3D shapes were continuously generated by projecting dynamic mapping images on the surface. A slim telescopic actuator was designed to show long strokes and minimize area for staking. A 3D shape was formed by thrusting and extruding the high-elasticity material using multiple telescopic actuators. This structure was advantageous for generating arbitrary continuous surface, projecting dynamic images and lightening weight. Because of real-time synchronization, a distributed controller based on EtherCAT was applied to operate hundreds of telescopic actuators smoothly. Integrated operating software consecutively generated realistic scenes by coordinating extruded shapes and projecting 3D image from multiple projectors. An opera content was optimized for the chameleon surface and showed to an audience in an actual concert.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.960-966
• /
• 1997

The effects of epoxy resins and content of catalyst on the cure characteristics were studied by FT-IR, DSC and dynamic viscometer for the thermal properties and rheological properties of the catalytic (N-Benzylpyrazinium hexafluoroantimonate, BPH) epoxy thermosetting system. Compared with DSC results of DEGBF containing 0.5wt% BPH, the DSC thermograms of DGEBA containing 0.5wt% BPH indicated that the reaction was faster than that of DGEBF/BPH and the conversion rate of DGEBA/BPH was high in the initial stage of the reaction. As the concentration of BPH increases, the reaction and conversion rates show similar value in both the cases. The influence of hydroxyl group of epoxy resin on gel point defined from the crossover point of storage modulus (G') and loss modulus (G") could be explained by the formation of 3-dimensional network in the initial stage owing to the curing reaction between epoxides and hydroxyl groups of epoxy resin. This was consistent with the gel point obtained from DSC, FT-IR and moduli crossover. The activation energy (Et) obtained from the crossover point (G'/G"=1) are $31-39kJ.mol^{-1}$ for various BPH compositions in case of two epoxy systems.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.891-898
• /
• 2003

This paper analyzes and proposes a scheme that improves the performance of the RTP that is developed to support the end-to-end transmission function and QoS monitor function for real-time multimedia data transmission. Although the existing RTP module supports real-time transmission, it has some problems in guaranteeing QoS parameters. To solve this problem, we propose a new Selective Repeat Adaptive Rate Control (SRARC). The SRARC can support QoS by referring to the data transmission status from the client and then classifying the network status into three levels. It selectively transmits multimedia data and dynamically controls transmission rates based on such information as bandwidth, packet loss rate, and latency that can be calculated in data transfer phase. To verify the SRARC, we implement it in real local area networks and compare the QoS parameters of the SRARC with those of the SR and RTP By the experimental results, the SRARC shows better performance in the aspects of bandwidth usage rate, packet loss rates, and transmission delays than the existing RTP schemes.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.8
• /
• pp.432-444
• /
• 2004

In this paper, we construct the TMO-based object group model on distributed environment, and analyze and evaluate the executability for distributed real-time service of our object group model by developing the distributed real-time application simulator applying the model. The Time-triggered Message-triggered Object(TMO) is a real-time server object having real-time property itself. The TMO-based object group is defined as a set of objects which logically reconfigured the physically distributed one or more TMOs on network by a given distributed application. For supporting group management of the server objects, the TMO-based object group we suggested provides the functions which register and withdraw the solver objects as a group member to an arbitrary object group, and also provides the functions which insert and delete the access rights of server objects from clients. Also, our model was designed and implemented to support the appropriate object selection and dynamic binding service for a single TMO as well as the duplicated TMOs, and to support the real-time scheduling service for the clients which are requesting the service. Finally, we developed the Defence System against Invading Enemy Planes(DSIEP) simulator as a practical example of distributed real-time application by applying our model, and evaluated the adaptability of distributed service strategies for the group components and the executability of real-time services that the TMO-based object group model provides.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.209-218
• /
• 2021

First principle-based modeling studies have been performed to improve the heat exchange efficiency of ORV and optimize operation, but the heat transfer coefficient of ORV is an irregular system according to time and location, and it undergoes a complex modeling process. In this study, FNN, LSTM, and AutoML-based modeling were performed to confirm the effectiveness of data-based modeling for complex systems. The prediction accuracy indicated high performance in the order of LSTM > AutoML > FNN in MSE. The performance of AutoML, an automatic design method for machine learning models, was superior to developed FNN, and the total time required for model development was 1/15 compared to LSTM, showing the possibility of using AutoML. The prediction of NG and seawater discharged temperatures using LSTM and AutoML showed an error of less than 0.5K. Using the predictive model, real-time optimization of the amount of LNG vaporized that can be processed using ORV in winter is performed, confirming that up to 23.5% of LNG can be additionally processed, and an ORV optimal operation guideline based on the developed dynamic prediction model was presented.