• Journal of Sensor Science and Technology
• /
• v.5 no.4
• /
• pp.71-79
• /
• 1996

The mechanism of electrochemical polymerization of polypyrrole was analyzed using Q.C.A. via measuring the resonant frequency and resonant resistance of AT-cut quartz crystal, whose electrodes were fabricated with indium tin oxide by sputtering method. The quantity of polymerized polypyrrole was able to be calculated from the resonant frequency and the viscoelasticity of polypyrrole film from resonant resistance. We found that the elastic film is formed at the first stage of the polymerization, but transformed to viscoelastic film later and that this transition repeated at some point. From these results, it was confirmed that the rheological characteristics of electrochemically polymerized polypyrrole thin film can be analyzed using Q.C.A.

• The Korean Journal of Applied Statistics
• /
• v.24 no.4
• /
• pp.597-607
• /
• 2011

Value at Risk(VaR) is being widely used as a simple tool for measuring financial risk. Although VaR has a few weak points, it is used as a basic risk measure due to its simplicity and easiness of understanding. However, it becomes very difficult to estimate the volatility of the portfolio (essential to compute its VaR) when the number of assets in the portfolio is large. In this case, we can consider the application of a dimension reduction technique; however, the ordinary factor analysis cannot be applied directly to financial data due to autocorrelation. In this paper, we suggest a dimension reduction method that uses the time-series factor analysis and DCC(Dynamic Conditional Correlation) GARCH model. We also compare the method using time-series factor analysis with the existing method using ordinary factor analysis by backtesting the VaR of real data from the Korean stock market.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.8-11
• /
• 2002

Recently, the spark and the overheat due to in the failure of pressure contacts on connecting points and the momentary short circuit have been the major causes of electrical fire because these may cause the deposition and the graphite of insulating materials in electrical wiring system. Also, because in these cases the current is a surge one, the losses and faults of a communication, a home appliances, a computer and a measuring instrument may occur. Especially, in such cases, we are very difficult to detect the failure of pressure contacts on connecting points and the momentary short circuit. In this paper, we have developed an auxiliary control device, the electrical fire prevention control device(EFPCD), of an earth leakage breaker(ELB). And we can pre-vent the electrical fire caused by the spark and the overheat occurring in the failure of pressure contacts in connecting points and the momentary short circuit with the EFPCD.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.2
• /
• pp.9-17
• /
• 2008

We propose a method to determine camera parameters for character motion, which confiders the motion by itself. The basic idea is to approximately compute the area swept by the motion of the character's links that are orthogonally projected onto the image plane, which we call "Motion Area". Using the motion area, we can determine good fixed camera parameters and camera paths for a given character motion in the off-line or real-time camera control. In our experimental results, we demonstrate that our camera path generation algorithms can compute a smooth moving camera path while the camera effectively displays the dynamic features of character motion. Our methods can be easily used in combination with the method for generating occlusion-free camera paths. We expect that our methods can also be utilized by the general camera planning method as one of heuristics for measuring the visual quality of the scenes that include dynamically moving characters.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.272-275
• /
• 2014

An improved fuzzy Kalman filtering speed estimation scheme was proposed by means of measuring stator side voltage and current value based on vector control state equation of induction motor. The designed fuzzy adaptive controller conducted recursive online correction of measurement noise covariance matrix by monitoring the ratio of theory residuals and actual residuals to make it approach real noise level gradually, allowing the filter to perform optimal estimation to improve estimation accuracy of EKF. Meanwhile, co-simulation scheme based on MATLAB and Ansoft was proposed in order to improve simulation accuracy. Field-circuit coupling problems of induction motor under the action of vector control were solved and the parameter optimization accuracy was improved dramatically. The simulation and experimental results show that this algorithm has a strong ability to inhibit the random measurement noise. It is able to estimate motor speed accurately, and has superior static and dynamic characteristics.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.509-517
• /
• 2013

In this paper, we researched a method that makes a good acoustic-speech system using a digital signal processing technique with dynamic microphone as a transducer. Good acoustic-speech system should deliver the original sound input to electric signal without distortion. By measuring the frequency response of the microphone, adjustment factors are obtained by comparing measured data and standard frequency response of microphone for each frequency band. The final sound levels are obtained using the developed adjustment factors of frequency responses from the microphone and speaker to match the original sound levels using the digital signal processing technique. Then, we minimize the changes in the frequency response and level due to the variation of the distance from source to microphone, where the frequency responses were measured according to the distance changes.

• The Journal of Society for e-Business Studies
• /
• v.16 no.2
• /
• pp.129-142
• /
• 2011

Traditionally research in Service Oriented Architecture(SOA) security has focused primarily on exploiting standards and solutions separately. There exists no unified methodology for SOA security to manage risks at the enterprise level. It needs to analyze preliminarily security threats and to manage enterprise risks by identifying vulnerabilities of SOA. In this paper, we propose a metric-based vulnerability assessment method using dynamic properties of services in SOA. The method is to assess vulnerability at the architecture level as well as the service level by measuring run-time dependency between services. The run-time dependency between services is an important characteristic to understand which services are affected by a vulnerable service. All services which directly or indirectly depend on the vulnerable service are exposed to the risk. Thus run-time dependency is a good indicator of vulnerability of SOA.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.1-9
• /
• 2009

In heterogeneous and distributed computing environments, with an increasing number of Web services providing similar functionalities, the reliability of Web services is a critical decision factor. To fulfill the open business model such as cooperation among enterprises, several Web services can be composed into the upper level business transaction. In Web services composition, the reliability of services is more and more critical. Though each unit Web service can be reliable, the reliability of the composed service is not guaranteed. Thus a way to efficiently assess and select composed Web services is needed. In this paper, we define new metrics for measuring the trust value of Web services, and propose an evaluation method to predict the trustworthy degree of the composed services based on the metrics. We also define a conceptual framework to support optimal Web services selection based on the proposed trust evaluation method. By selecting using the quantitative measurement rather than intuitive selection of the service user, it allows the service users to select the high reliable service meeting their quality requirements well.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.13-19
• /
• 2011

Purpose: In real life there are both straight-paths and curved-paths. To evaluate walking ability of both kinds, a figure-8 walking test (F8WT) was developed. The aim of this study was to validate the measure in hemiplegic patients with walking difficulties and to identify correlations of curved walking ability with straight walking ability, motor function, and walking performance ability. Methods: Twenty subjects participated in this study. Curved walking was measured by a F8WT. Straight walking ability was measured by a 10-meter walking test (10MWT). Dynamic balancea bility was measured by timed up and go (TUG) tests. Walking performance ability was measured using a modified motor assessment scale (MMAS). Motor function was measured by the Fugl-Meyer assessment (FMA) scale. Data were analyzed using Pearson correlation analysis. Linear regression analyses were performed to explore other functional tests in mobility ability by F8WT time, 10MWT (dependent variable). Results: There was a significant positive correlation of F8WT time with 10MWT and TUG. There was a significant negative correlation of F8WT time with MMAS and FMA-coordination. There was a significant positive correlation of 10MWT with TUG. There was a significant negative correlation of 10MWT with MMAS and FMA-coordination. The F8WT time for curved walking ability was attributed to 10MWT for straight walking ability as 94% level of contribution. Conclusion: The results suggest that the F8WT is a good instrument for measuring walking ability because there is a robust correlation of F8WT time with 10MWT, TUG, MMAS, and FMA-coordination in hemiplegic patients who, after stroke, have a mobility deficiency.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.161-170
• /
• 2011

Despite some practical confusion over the variations in the diagram which may be drawn differently depending upon the CASE, the statechart of UML has been widely used to show the dynamic behaviour of the systems. Prior research has employed either simple switch-case statement or the state design pattern to generate source code from the statechart, which may result in varying source codes. This paper made an attempt to formally define the statechart and generate source codes from it. Firstly we cleaned up the XMI which was generated from different CASEs. This XMI has been translated to the EHA to identify automata contained in it. Then the elements of the statechart metamodel were mapped to the java programs. We also verified the quality of source codes by measuring functionality and maintainability. The case employed in this study was the air conditioner. The reason was that the case includes various states and transitions of interest. It was found that XMI was well extracted by removing some legacy codes in the CASE and the source codes were then successfully generated with the concurrency and hierarchy of the statechart. Further research is required to validate it practical significance with a larger case.