• 제목/요약/키워드: Dynamic Measuring

검색결과 778건 처리시간 0.025초

압전형 압력센서의 교정기법 자동화 (An automatic calibration technique for piezoelectric pressure sensors)

  • 최주호;유준
    • 제어로봇시스템학회논문지
    • /
    • 제3권4호
    • /
    • pp.357-362
    • /
    • 1997
  • This paper suggests an automatic calibration technique for piezoelectric low pressure transducer measuring a pressure blow 500psi. The present calibration system embedded with error correction algorithm generates it's best you don't cut parts of wards like so dynamic pressure and compensates offset voltage and pressure error. It is shown via experimental results that the instrumentation accuracy has been improved and mean time between calibrations has been shortened.

  • PDF

장망초지기에서 탈수 시뮬레이션 (Drainage Simulation in Fourdrinier Paper Machine)

  • 김용식;원종명
    • 펄프종이기술
    • /
    • 제32권3호
    • /
    • pp.10-17
    • /
    • 2000
  • The MDDA(Modified Dynamic Drainage Analyzer) was developed to evaluate the drainage at hydrofoil table roll and low vacuum devices on fourdrinier paper machine MB-former. Comparison of the results was obtained using a computer simulation system based on Taylor's equation and filtration equation and by measuring the consistency profile in a paper machine presented an agreement within 10.7% This device can evaluate the dewatering pro-file on wire for various stock properties adjust dewatering devices on fourdrinier paper machine and control the dosage of retention aids for improving paper structural properties and runnability of papermachine.

  • PDF

전산기를 이용한 CNC 공작 기계의 동적 정밀도의 평가에 대한 연구 (Computer aided dynamic accuracy evaluation on CNC machine tools)

  • 권혁동
    • 한국정밀공학회지
    • /
    • 제13권7호
    • /
    • pp.24-28
    • /
    • 1996
  • In this paper, a new measurement system has been developed for measuring servo errors of CNC machine tools. Unlike the ball link bar method using circular path, the developed system uses two orthogonal straight paths for measurement of errors, giving relatively short test length. For position measurment, linear displacement sensor and steel cube have been designed, and the software for relevant data sampling and error evaluation has been implemented.

  • PDF

CSCF 노드 관리를 이용한 응용 서비스 구현 (The Implementation of Application Services Using CSCFs of Management)

  • 이재오;조재형
    • 인터넷정보학회논문지
    • /
    • 제13권2호
    • /
    • pp.33-40
    • /
    • 2012
  • 최근 네트워크간의 통합으로 인하여 네트워크 통합 관리 시스템 중 하나인 IMS (IP Multimedia Subsystem)의 사용이 증가하고, 이로 인해 네트워크 트래픽이 증가하고 있다. 따라서 IMS에서의 자원을 효율적으로 관리하기 위하여 네크워크 관리 시스템의 기능이 점차 커지고 있다. 특히 IMS 노드에 트래픽은 유동적이기 때문에 이것을 효과적으로 관리하기 위해서는 적절한 동적 라우팅 구조가 필요하다. 따라서 본 논문에서는 IMS 노드간의 트래픽을 제어하기위한 동적 알고리즘 구조를 제안하고, IMS의 대표적인 응용서비스인 Presence Service와 PoC (Push to talk over Cellular)를 이용하여 본 알고리즘의 성능을 측정한다.

Comparison Kinematic Patterns between the Star Excursion Balance Test and Y-Balance Test in Elite Athletes

  • Ko, Jupil
    • 한국운동역학회지
    • /
    • 제27권3호
    • /
    • pp.165-169
    • /
    • 2017
  • Objective: The Star Excursion Balance Test (SEBT) and Y-Balance Test (YBT) have been commonly applied to measure dynamic postural stability ability. These two tests are utilized interchangeably in various settings. However, they could in fact require different movements to assess dynamic postural stability, as one uses a platform and different measuring techniques than the other. The purpose of this study was to determine if there was a significant difference in the kinematic patterns in physically active population while performing the SEBT and the YBT. Method: Seventy participants performed in the Anterior (AN), Posteromedial (PM), and Posterolateral (PL) directions of the SEBT and the YBT. The kinematics of hip, knee, and ankle in sagittal plane was calculated and analyzed. Paired-sample t-tests were performed to compare joint angular displacement in the ankle, knee, and hip between the SEBT and the YBT. Results: Significant differences in angular displacement at the hip, knee, and ankle joints in the sagittal plane between performance on the SEBT and on the YBT were observed. Conclusion: Clinicians and researchers should not apply these dynamic postural control tasks interchangeably from one task to another. There appear to be kinematic pattern differences between tests in healthy physical active population.

Gated Recurrent Unit Architecture for Context-Aware Recommendations with improved Similarity Measures

  • Kala, K.U.;Nandhini, M.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권2호
    • /
    • pp.538-561
    • /
    • 2020
  • Recommender Systems (RecSys) have a major role in e-commerce for recommending products, which they may like for every user and thus improve their business aspects. Although many types of RecSyss are there in the research field, the state of the art RecSys has focused on finding the user similarity based on sequence (e.g. purchase history, movie-watching history) analyzing and prediction techniques like Recurrent Neural Network in Deep learning. That is RecSys has considered as a sequence prediction problem. However, evaluation of similarities among the customers is challenging while considering temporal aspects, context and multi-component ratings of the item-records in the customer sequences. For addressing this issue, we are proposing a Deep Learning based model which learns customer similarity directly from the sequence to sequence similarity as well as item to item similarity by considering all features of the item, contexts, and rating components using Dynamic Temporal Warping(DTW) distance measure for dynamic temporal matching and 2D-GRU (Two Dimensional-Gated Recurrent Unit) architecture. This will overcome the limitation of non-linearity in the time dimension while measuring the similarity, and the find patterns more accurately and speedily from temporal and spatial contexts. Experiment on the real world movie data set LDOS-CoMoDa demonstrates the efficacy and promising utility of the proposed personalized RecSys architecture.

다중대역-디지탈 수동혼변조왜곡 측정시스템 개발 (Implementation of MultiBand-Digital Passive InterModulation Distortion Measurement System)

  • 박기원;신동환;이영철
    • 한국전자통신학회논문지
    • /
    • 제11권12호
    • /
    • pp.1193-1200
    • /
    • 2016
  • 본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동혼변조왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동혼변조왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 PIMD3를 측정하여 최고 -138dBc를 나타내었다.

The Effect of High-Skilled Emigration, Foreign Direct Investment, and Policy on the Growth Rate of Source Countries: A Panel Analysis

  • Kim, Jisong;Lee, Nah Youn
    • East Asian Economic Review
    • /
    • 제20권2호
    • /
    • pp.229-275
    • /
    • 2016
  • We study the effect of the high-skilled emigration rate on the growth rate of the source countries. We incorporate the foreign direct investment and the policy variables into the panel model and also their interactions with the high-skilled emigration rate, as they are related to the network externality that may be created by the high-skilled emigrants working abroad. We apply the static fixed-effects model and compare it with the results obtained in the dynamic panel model with system generalized methods of moments estimators. We find the negative effect of the high-skilled emigration rate by itself and in its interaction with the foreign direct investment only in the dynamic model. However, we find positive coefficient for the interaction of the high-skilled emigration rate and the civil liberties index, which holds across the static and dynamic specifications. This implies that the effect of the high-skilled emigration rate on the growth rate of the source countries can be positive, and the extent is larger for countries with 'poor' civil liberties. The developing countries with low levels of foreign direct investment inflows and 'poor' civil liberties can best benefit from the high levels of skilled emigration outward. Through finding significant interactions with other variables, we confirm that the high-skilled emigration should be considered along with other related variables in measuring its impact on growth. The implications offer suggestions for the international trade and aid policies.

유성치차열의 저속영역에서의 동특성에 관한 실험적 연구 (An Experimental Study on the Dynamic Characteristics of a Planetary Gear Train in the Low Speed Region)

  • 이정한;천길정;김주호;김충;한동철;명제형;정태형
    • 한국자동차공학회논문집
    • /
    • 제5권4호
    • /
    • pp.121-129
    • /
    • 1997
  • Gear train system test rig of power circulating type was fabricated, and systematic experiment for measuring dynamic characteristics of the planetary gear trains in the low speed region has been carried out using the test rig. The measured parameters are fillet strains of the sun gear and ring gear, carrier displacements, torques of the input and output shafts. The results are as follows : i) Even though the loading torque is constant, torque variation has been observed on the input and output hafts, ii) The variation of the torque has two frequency components, i.e. lower one of the input shaft rotation and higher one of the two teeth meshing, iii) The variation of the fillet strains shows the same tendency as that of the torque, iv) The loci of the carrier depend on the torque and rotational speed.

  • PDF

Dynamic compaction of cold die Aluminum powders

  • Babaei, Hashem;Mostofi, Tohid Mirzababaie;Alitavoli, Majid;Namazi, Nasir;Rahmanpoor, Ali
    • Geomechanics and Engineering
    • /
    • 제10권1호
    • /
    • pp.109-124
    • /
    • 2016
  • In this paper, process of dynamic powder compaction is investigated experimentally using impact of drop hammer and die tube. A series of test is performed using aluminum powder with different grain size. The energy of compaction of powder is determined by measuring height of hammer and the results presented in term of compact density and rupture stress. This paper also presents a mathematical modeling using experimental data and neural network. The purpose of this modeling is to display how the variations of the significant parameters changes with the compact density and rupture stress. The closed-form obtained model shows very good agreement with experimental results and it provides a way of studying and understanding the mechanics of dynamic powder compaction process. In the considered energy level (from 733 to 3580 J), the relative density is varied from 63.89% to 87.41%, 63.93% to 91.52%, 64.15% to 95.11% for powder A, B and C respectively. Also, the maximum rupture stress are obtained for different types of powder and the results shown that the rupture stress increases with increasing energy level and grain size.