Browse > Article
http://dx.doi.org/10.12989/gae.2016.10.1.109

Dynamic compaction of cold die Aluminum powders  

Babaei, Hashem (Department of Mechanical Engineering, Engineering Faculty, University of Guilan)
Mostofi, Tohid Mirzababaie (Department of Mechanical Engineering, Engineering Faculty, University of Guilan)
Alitavoli, Majid (Department of Mechanical Engineering, Engineering Faculty, University of Guilan)
Namazi, Nasir (Department of Mechanical Engineering, Engineering Faculty, University of Guilan)
Rahmanpoor, Ali (Department of Mechanical Engineering, Roudbar Branch, Islamic Azad University)
Publication Information
Geomechanics and Engineering / v.10, no.1, 2016 , pp. 109-124 More about this Journal
Abstract
In this paper, process of dynamic powder compaction is investigated experimentally using impact of drop hammer and die tube. A series of test is performed using aluminum powder with different grain size. The energy of compaction of powder is determined by measuring height of hammer and the results presented in term of compact density and rupture stress. This paper also presents a mathematical modeling using experimental data and neural network. The purpose of this modeling is to display how the variations of the significant parameters changes with the compact density and rupture stress. The closed-form obtained model shows very good agreement with experimental results and it provides a way of studying and understanding the mechanics of dynamic powder compaction process. In the considered energy level (from 733 to 3580 J), the relative density is varied from 63.89% to 87.41%, 63.93% to 91.52%, 64.15% to 95.11% for powder A, B and C respectively. Also, the maximum rupture stress are obtained for different types of powder and the results shown that the rupture stress increases with increasing energy level and grain size.
Keywords
aluminum powder; compaction; drop hammer machine; impact loading; powder metallurgy;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Babaei, H. and Darvizeh, A. (2011), "Investigation into the response of fully clamped circular steel, copper, and aluminum plates subjected to shock loading", Mech. Des. Struct. Mach., 39(4), 507-526.   DOI
2 Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015a), "Experimental and theoretical study of large deformation of rectangular plates subjected to water hammer shock loading", Proceedings of the Institution of Mechanical Engineers, Part E: J. Process Mech. Eng. DOI: 10.1177/0954408915611055   DOI
3 Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015b), "Experimental investigation and analytical modelling for forming of circular-clamped plates by using gases mixture detonation", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. DOI: 0954406215614336
4 Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015c), "Study on the response of circular thin plate under low velocity impact", Geomech. Eng., Int. J., 9(2), 207-218.   DOI
5 Babaei, H., Mirzababaie Mostofi, T. and Sadraei, S.H. (2015d), "Effect of gas detonation on response of circular plate- experimental and theoretical", Struct. Eng. Mech., Int. J., 56(4), 535-548.   DOI
6 Darvizeh, A., Nariman-Zadeh, N. and Gharababaei, H. (2003), "GMDH-type neural network modelling of explosive cutting process of plates using singular value decomposition", Syst. Anal. Model. Simul., 43(10), 1383-1397.   DOI
7 Farlow, S.J. (1984), Self-Organizing Methods in Modeling: GMDH Type Algorithms, (Volume 54), CrC Press.
8 Gharababaei, H., Nariman-Zadeh, N. and Darvizeh, A. (2010), "A simple modelling method for deflection of circular plates under impulsive loading using dimensionless analysis and singular value decomposition", J. Mech., 26(3), 355-361.   DOI
9 Golub, G.H. and Reinsch, C. (1970), "Singular value decomposition and least squares solutions", Numerische mathematik, 14(5), 403-420.   DOI
10 Housen, K.R. and Holsapple, K.A. (2003), "Impact cratering on porous asteroids", Icarus, 163(1), 102-119.   DOI
11 Iba, H., Kurita, T., Garis, H.d. and Sato, T. (1993), "System identification using structured genetic algorithms", Proceedings of the 5th International Conference on Genetic Algorithms, (Presented), Urbana-Champaign, IL, USA, June, pp. 279-286.
12 Ivakhnenko, A. (1971), "Polynomial theory of complex systems", IEEE Transact. Syst. Man Cybernet., 1(4), 364-378.   DOI
13 Jamali, A., Khaleghi, E., Gholaminezhad, I., Nariman-Zadeh, N., Gholaminia, B. and Jamal-Omidi, A. (2014), "Multi-objective genetic programming approach for robust modeling of complex manufacturing processes having probabilistic uncertainty in experimental data", J. Intell. Manuf., 1-15.
14 Khan, D.F., Yin, H.Q., Matiullah, M., Asadullah, A. and Qu, X.H. (2013), "Analysis of density and mechanical properties of iron powder with upper relaxation assist through high velocity compaction", The Materials Science Forum, (Presented).
15 Majzoobi, G., Bakhtiari, H., Atrian, A., Pipelzadeh, M. and Hardy, S. (2015b), "Warm dynamic compaction of Al6061/SiC nanocomposite powders", Proceedings of the Institution of Mechanical Engineers, Part L: J. Mater. Des. Appl., 1464420714566628.
16 Kristinsson, K. and Dumont, G. (1992), "System identification and control using genetic algorithms", IEEE Transact. Syst. Man Cybernet., 22(5), 1033-1046.   DOI
17 Madandoust, R., Ghavidel, R. and Nariman-Zadeh, N. (2010), "Evolutionary design of generalized GMDHtype neural network for prediction of concrete compressive strength using UPV", Computat. Mater. Sci., 49(3), 556-567.   DOI
18 Majzoobi, G., Atrian, A. and Pipelzadeh, M. (2015a), "Effect of densification rate on consolidation and properties of Al7075-B4C composite powder", Powder Metallurgy, 58(4), 281-288. DOI: http://dx.doi.org/10.1179/1743290115Y.0000000008   DOI
19 Nariman-Zadeh, N. and Jamali, A. (2007), "Pareto genetic design of GMDH-type neural networks for nonlinear systems", Proceedings of the International Workshop on InductiVe Modelling, (Presented), (Drchal, J. and Koutnik, J. eds.), Czech Technical University, Prague, Czech Republic, September.
20 Nariman-Zadeh, N., Darvizeh, A., Darvizeh, M. and Gharababaei, H. (2002a), "Modelling of explosive cutting process of plates using GMDH-type neural network and singular value decomposition", J. Mater. Process. Technol., 128(1), 80-87.   DOI
21 Nariman-Zadeh, N., Darvizeh, A., Felezi, M. and Gharababaei, H. (2002b), "Polynomial modelling of explosive compaction process of metallic powders using GMDH-type neural networks and singular value decomposition", Model. Simul. Mater. Sci. Eng., 10(6), 727.   DOI
22 Porter, B. and Zadeh, N. (1995), "Genetic design of computed torque/fuzzy-logic controllers for robotic manipulators", Proceedings of IEEE International Symposium on Intelligent Control Proceedings, Monterey, CA, USA, August.
23 Nariman-Zadeh, N., Darvizeh, A. and Ahmad-Zadeh, G. (2003), "Hybrid genetic design of GMDH-type neural networks using singular value decomposition for modelling and prediction of the explosive cutting process", Proceedings of the Institution of Mechanical Engineers, Part B: J. Eng. Manuf., 217(6), 779-790.   DOI
24 Natke, H.G. (2014), Application of System Identification in Engineering, (Volume 296), Springer.
25 Porkhial, S., Salehpour, M., Ashraf, H. and Jamali, A. (2015), "Modeling and prediction of geothermal reservoir temperature behavior using evolutionary design of neural networks", Geothermics, 53, 320-327.   DOI
26 Sukegawa, N., Sano, T., Horikoshi, S. and Takeishi, H. (2000), "Dynamic powder compaction for parts with high-aspect ratio", Int. J. Impact Eng., 24(6), 561-570.   DOI
27 Vivek, A., DeFouw, J.D. and Daehn, G.S. (2014), "Dynamic compaction of titanium powder by vaporizing foil actuator assisted shearing", Powder Technol., 254, 181-186.   DOI
28 Vogler, T., Lee, M. and Grady, D. (2007), "Static and dynamic compaction of ceramic powders", Int. J. Solid. Struct., 44(2), 636-658.   DOI
29 Yan, Z.-q., Feng, C., Cai, Y.-x. and Jian, Y. (2013), "Influence of particle size on property of Ti-6Al-4V alloy prepared by high-velocity compaction", Transact. Nonferrous Metals Soc. China, 23(2), 361-365.   DOI
30 Yin, H., Li, H., Qu, X., Khan, M., Ali, S. and Iqbal, M.Z. (2013), "Compaction of Ti-6Al-4V powder using high velocity compaction technique", Mater. Des., 50, 479-483.   DOI