• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.117-124
• /
• 2000

The rubber wheel-type AGT has two major kinds of bogie; one is the bogie type and the other steering one. Both are important vehicular structure to support the whole running vehicle and passenger loads. This paper deals with the static analysis for the two types of bogie frame subjected to combined external forces, as well as independent ones specified in UIC 515-4. Furthermore, the dynamic analysis is performed under vibrational loading conditions so as to compare dynamic characteristics, Numerical results by using commercial packages, I-DEAS and NASTRAN show that maximum stresses do not exceed the yield strength level of material used for both bogies. From an overall viewpoint of strength, the bogie type turns out to be superior to the steering type except for the case of a lateral loading. It is also observed that the steering type shows a characteristics of low frequency behavior during a course of searching for structurally weak areas to be stiffened. The vibrational fatigue analysis for each bogie frame depends on the loading time history conditions which is applied. Time History Central Database List in the NASTRAN package. Subsequent1y, the fatigue life of bogie type is longer than the steering type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.90-95
• /
• 2005

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints with various shapes of cutouts. It is important to study these connected structures under dynamic forces for evaluation of stress concentration. In this paper, a FQI(fatigue quality index) analysis using the concept of SF(severity factor) is performed to various shape of elliptical hole. The SF is affected by the location of cutout in plate and radius ratio, static SF is analyzed with finite element analysis and the equation of FQI for predicting a dynamic SF is formed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.489-494
• /
• 2001

This paper deals with a dynamic modeling of artillery system loaded by gun charge explosion during firing condition. Geometric and elastic gun data are used to modify a projectile interaction model. The maximum impact force on gun barrel was 15,000 N and the gun barrel moved about 1.3 m. A cannon bal] was presented to travel in the flexible gun, the traveling distance was about 23,000 m, and the angular velocity was about 10rad/sec. The artillery dynamic system using the multi-body dynamics enables us to obtain the data for the fatigue analysis.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.125-130
• /
• 2005

The railway shall be verified with the view point of dynamic performances before delivering to the Customer and the verification procedure shall be followed the Customer's demands or relevant international standard, UIC 518 (Testing and approval of railway vehicles from the point of view of their dynamic behavior-Safety-Track fatigue-Ride quality). In this paper, verification procedures in UIC 518 and the test results for domestic project are summarized.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.646-652
• /
• 2009

In this paper, welding pitch optimization technique of vehicle subframe is presented considering the fatigue life of spot welding nuggets. Fatigue life of spot welding nuggets is estimated by using the frequency-domain fatigue analysis technique. The input data, which are used in the fatigue analysis, are obtained by performing the dynamic analysis of vehicle model passing through the Belgian road profile and also the modal frequency response analysis of finite element model of vehicle subframe. According to the fatigue life result obtained from the frequency-domain fatigue analysis, the design points to optimize the weld pitch distance are determined. For obtaining the welding pitch combination to maximize the fatigue life of the spot welding nuggets, 4-factor, 3-level orthogonal array experimental design is used. This study shows that the optimized subframe improves the fatigue life of welding nugget with minimum fatigue life about 65.8 % as compared with the baseline design.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.277-282
• /
• 2011

Bogie frame is typical safety part of railway vehicle. Total serviceable life of bogie frame will be evaluated by Cumulative Damage Approach Method that is defined by dynamic strain measurement during revenue service under the actual track conditions. As a result of the standardization process developed in British Standard Institution, BS 7608 defines for fatigue design and test method of steel structure by fatigue test results over the long period. This paper evaluates the total serviceable life applying BS 7608 for the bogie frame of Electric Multiple Unit to verify structural safety of the bogie frame.

• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.97-102
• /
• 1997

내피로성은 기계적 구조물로 사용되는 고분자재료에는 반드시 필요한 성질이며, 피 로거동은 재료특유의 비선형 동적 점탄특성과 아주 밀접한 관계가 있다. 본 연구에서는 피 로과정에서의 비선형 동적 점탄특성을 정량적, 연속적으로 측정할수 있는 시험 기기와 가해 준 변형에 대한 응답 응력파의 기본 응력파(선형적 응답)로부터의 차이를 직접 측정하여 이 를 규격화한 비선형 점탄성파라미터, NVP(Nonlinear Viscoelastic Parameter)라 명명한 새 로운 평가방법을 개발하였다. 그리고 고밀도 폴리에틸렌(HDPE) 배향물을 사용하여 그 평가 방법의 타당성을 조사한 결과 피로과정에서의 비선형동적 점탄특성을 나타내는 NVP가 증 가함에 따라 재료의 피로수명은 감소하였다. 따라서 NVP가 고분자재료의 내피로성을 평가 하는 척도로서 사용가능하다는 사실이 증명되었다. 또한 각 고조파 성분에대해 조사한 결과 인장형 피로시험양식에서는 고체입자 분산계의 전단변형에서 나타난 비선형 점탄성의 결과 와는 달리 2차 성분의 크기가 가장컸으며 NVP에의 기여도도 가장 크게 나타났다. 이는 변 형양식의 차이에 따른 결과를 볼수 있다.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.83-89
• /
• 2010

This study presents a stability analysis procedure for caisson structures and a case study for a honeycomb slit-caisson. CADMAS-SURF was used to calculate the wave pressures based on an irregular wave with a 50-year period and the data for three regular waves obtained from a target site. Then, the irregular and regular wave pressures were used to obtain the dynamic responses (stresses) of the caisson structure using an explicit time integration program, ANSYS/LS-DYNA. Finally, the DNV code was used for structural and fatigue stability analyses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1401-1410
• /
• 1996

This paper present a method to predict fatigue life of a construction equipment performing static stress analysis and dynamic stress analysis using the computer simulation for proto and pilot type model. The parameter of design variable is used for finite elemt modeling of a excavator. Desinger can design reliable product and shorten lead time by using "Simulation System for Front Attachment of Excavator" develped in this study.his study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.133-138
• /
• 2007

The balance shaft housing in the recent engines tends to have the high cycle fatigue crack caused by increased engine power. In this paper, a CAE procedure is introduced to predict the durability of the balance shaft housing. The procedure is performed through two analysis steps. In the first step, the multibody dynamic simulation is used to obtain more accurate loading boundary conditions applied to the finite element model for the following step. Next, the finite element analysis is performed to predict the durability of the balance shaft housing through the calculation of the safety factor. Through this CAE procedure, the revised balance shaft housing was developed to improve the durability. And the durability of the housing was confirmed experimentally.