• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.104-110
• /
• 2006

The advantage of the DSM which employ multi-bit quantizer is the increased SNR at the modulator's output. Typically 6 dB improvement is effected for every one additional bit. But multi-bit quantizer evidently requires multi-bit DAC in the feedback loop. The integral linearity error of the feedback DAC has direct impact upon the system performance and degraded SNR of the system. In order to mitigate the negative impact the DAC has on the system performance, many DEM(Dynamic Element Matching) schemes has been proposed. Among the proposed schemes, four schemes(DER,CLA,ILA,DWA) are explained and its performance has been compared. DWA(Data Weighted Averaging) method shows the best performance of the all.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.956-963
• /
• 2006

This research studies multi participant consistency and dynamic data shared through 3D scenes in virtual network environments. In a distributed virtual environment of client-server structure, consistency is maintained by the static information exchange; as jerks occur by packet delay when updating messages of dynamic data exchanges are broadcasted frequence, the network bottleneck is reduced by predicting the movement path by using the Dead-reckoning algorithm. In Dynamic data path prediction, the tests the location prediction error between Dead-reckoning convergence interval and error of prediction and actual condition one time above threshold it interpolates a previously location. The shared dynamic data of the 3D virtual environment is implementation using the VRML EAI.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.130-136
• /
• 2012

Dynamic as well as static and geometric design parameters such as inertia, tooth profile, backlash and clearance can be directly considered via multi-body dynamic analysis along with contact analysis. However, it is time consuming to use finite elements for the consideration of the tooth flexibility in the multi-body dynamic analysis of gears. A computationally efficient procedure, so called, Gear Stiffness Module, is suggested to resolve this calculation time issue. The characteristics of gear tooth compliance are discussed and rotational stiffness element concept for the Gear Stiffness Module is presented. Transmission error analyses for a spur gear system are carried out to validate the reliability and efficiency of the module. Compared with the finite element model, the Gear Stiffness Module yields considerably similar results and takes only 3% of calculation time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.157-163
• /
• 1986

A method to improve the Finite Elements Model and to identify structure stiffness damages utilizing measured dynamic characteristics is suggested. In order to show the effectiveness of the proposed method, a sample structure is adopted and tested. It is found that; (1) the Finite Elements Model can be improved with experimentally obtained dynamic characteristics satisfactorily and (2) the test results are also very helpful to search the stiffness damaged part of the sample structure via plotting the error matrix[E], especially it is aboved that the weighted error matrix is very effective to detect even the stiffness changes are relatively small.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.4
• /
• pp.85-94
• /
• 2018

The cultural industry is treated as the sunrise industry in modern society. It has taken an increasing role in promoting the economic growth. Due to this, this paper attempts to explore the dynamic relationship between cultural industry and the economic growth. On the grounds of Cobb-Douglas production function, the cultural industry is regarded as a determinant such as the labor input and the capital input to impact the economic growth. Meanwhile, the quarterly datum form 2000-Q1 to 2017-Q4 are employed to perform an empirical analysis via the vector error correction model. The GDP is treated as an independent variable. The input of capital, the input of labor and the total input of cultural industry are treated as dependent variables. Furthermore, a menu of statistical approaches such as the co-integration test and the impulse response function will be used to testify the dynamic relationship between cultural industry and economic growth. Via the Johansen co-integration test, the results report that the cultural industry has a obviously positive effect on economic growth. Through the vector error correction estimation, the results also report that the cultural industry also has a significantly positive effect on economic growth, but less than that of the Johansen co-integration test. This paper provides a view that the cultural industry is a kind of a determinant to promote the economic growth. Therefore, the China's government should pay much attention to the cultural industry construction.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.544-547
• /
• 1997

In this paper, we propose a dynamic localization method using a rotating sonar and a map. The proposed method is implemented by using extended Kalman filter. The state equation is based on the encoder propagation model and the encoder error model, and the measurement equation is a map-based measurement equation using a rotating sonar sensor. By utilizing sonar beam characteristics, map-based measurements are updated while AMR is moving continuously. By modeling and estimating systematic errors of a differential encoder, the position is successfully estimated even the interval of the map-based measurement. Monte-Carlo simulation shows that the proposed global position estimator has the performance of a few millimeter order in position error and of a few tenth degrees in heading error and of compensating systematic errors of the differential encoder well.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.12
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.302-304
• /
• 2016

The purpose of this paper is to draw comparison between the performance of ${\alpha}-{\beta}-{\gamma}$ filter and Kalman filter of a tracking module for ARPA system on board high dynamic warship. The comparison is based on the filters' capability to reduce residual error and maintain a stable transient response. The residual error is computed from the difference between the observed the predicted positions for the entire tracking period. The results indicate that the Kalman filter has a higher tracking accuracy compared to the optimal ${\alpha}-{\beta}-{\gamma}$ filter. However, both filters have a similar transient response.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.305-307
• /
• 2016

The purpose of this paper is to determine the optimal values of the gain parameters used in the tracking module for a highly dynamic warship. The algorithm of the tracking module uses the ${\alpha}-{\beta}-{\gamma}$ filter to compute accurate estimates and update the state variables, that is, positions, velocity and acceleration. The filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization is achieved by plotting a range of the damping parameter ${\xi}$ against the corresponding residual error and then selecting the best value of ${\xi}$ with the minimum residual error. Optimal values of the smoothing coefficients are subsequently computed from the selected damping parameter, ${\xi}$.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.91-99
• /
• 2003

When the driver suddenly depresses the brake pedal under critical conditions, the desired trajectory of the vehicle can be changed. In this study, the vehicle dynamics and fuzzy logic controller are used to control the vehicle trajectory. The dynamic vehicle model consists of the engine, the rotational wheel, chassis, tires and brakes. The engine model is derived from the engine experimental data. The engine torque makes the wheel rotate and generates the angular velocity and acceleration of the wheel. The dynamic equation of the vehicle model is derived from the top-view vehicle model using Newton's second law. The Pacejka tire model formulated from the experimental data is used. The fuzzy logic controller is developed to compensate for the trajectory error of the vehicle. This fuzzy logic controller individually acts on the front right, front left, rear right and rear left brakes and regulates each brake torque. The fuzzy logic controlling each brake works to compensate for the trajectory error on the split - $\mu$ road conditions follows the desired trajectory.