• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.92-98
• /
• 1999

Dynamic behavior of missile which is fired in canister is analyzed by flexible multibody dynamics. The bending elasticity of missile is very important in case that missile is fired in the inclined launcher. In this paper, the force element model for the missile launching stage and the finite element model of missile are developed. The FEA model of missile is condensed into five lumped mass element model and the consistence between FE model and lumped mass model of missile is verified by modal analysis. As a result of analysis, sabot reaction force and pitch rate of missile for the variation of gap size and force element are obtained.

• Advances in materials Research
• /
• 제9권1호
• /
• pp.33-48
• /
• 2020

With the use of differential quadrature method (DQM), forced vibrations and resonance frequency analysis of functionally graded (FG) nano-size beams rested on elastic substrate have been studied utilizing a shear deformation refined beam theory which contains shear deformations influence needless of any correction coefficient. The nano-size beam is exposed to uniformly-type dynamical loads having partial length. The two parameters elastic substrate is consist of linear springs as well as shear coefficient. Gradation of each material property for nano-size beam has been defined in the context of Mori-Tanaka scheme. Governing equations for embedded refined FG nano-size beams exposed to dynamical load have been achieved by utilizing Eringen's nonlocal differential law and Hamilton's rule. Derived equations have solved via DQM based on simply supported-simply supported edge condition. It will be shown that forced vibrations properties and resonance frequency of embedded FG nano-size beam are prominently affected by material gradation, nonlocal field, substrate coefficients and load factors.

• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.297-314
• /
• 2019

Dynamic stability of a porous metal foam nano-dimension plate on elastic substrate exposed to bi-axial time-dependent forces has been studied via a novel 3-variable plate theory. Various pore contents based on uniform and non-uniform models have been introduced. The presented plate model contains smaller number of field variables with shear deformation verification. Hamilton's principle will be utilized to deduce the governing equations. Next, the equations have been defined in the context of Mathieu-Hill equation. Correctness of presented methodology has been verified by comparison of derived results with previous data. Impacts of static and dynamical force coefficients, non-local coefficient, foundation coefficients, pore distributions and boundary edges on stability regions of metal foam nanoscale plates will be studied.

• Advances in concrete construction
• /
• 제15권4호
• /
• pp.287-301
• /
• 2023

Hockey games attracts many fans around the world. This game requires a specific type of ball and a stick for controlling the motion and trace of the ball. This control of motion involves hitting the ball which is a direct intensive dynamic loading. The impact load transferred directly to the hand of the player and in the professional player may cause long term medical problems. Therefore, dynamic motion of the stick should be understood. In the current study, we analyze the dynamic motion of a hockey stick under impact loading from a hockey ball. In doing so, the stick geometry is simplified as a beam structure and quasi-2D relations of displacement is applied along with classical linear elasticity theory for isotropic materials. The governing equations and natural boundary condition are extracted using Hamilton's principle. The final equations in terms of displacement components are solved using Galerkin's numerical method. The results are presented using indentation and contact force values for variations of different parameters.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.538-547
• /
• 2011

이 연구에서는 녹차와 목재섬유를 복합한 친환경 복합보드를 건축내장재로 활용하기 위하여, 목재섬유에 대한 녹차의 배합비율을 달리한 녹차-목재섬유 복합보드를 제작하였고, 복합보드의 동적탄성률에 미치는 녹차의 배합비율 및 바인더로 사용한 접착제의 영향을 조사하였다. 녹차-목재섬유복합보드의 동적탄성률은 녹차를 넣지 않은 대조보드(control boards)의 그것보다 적었고, 녹차배합비율이 증가할수록 커지는 경향을 나타내었다. 또한, 보드제조에 사용된 바인더의 종류에 따라 동적탄성률의 차이가 나타났는데, $E_1$급의 요소수지가 $E_0$급의 요소수지보다 1.06~1.54배의 높은 값을 나타내었으며, 녹차의 배합비율이 커질수록 양자의 차이는 커지는 것이 확인되었다. 한편, 녹차-목재섬유복합보드의 동적탄성률과 휨 강도성능과는 비교적 높은 상관관계가 확인되어 일부 편차가 큰 조건을 제외하고 동적탄성률로부터 정적 휨 강도성능의 예측이 가능할 것으로 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.364-373
• /
• 2015

본 연구는 밀도와 귤박첨가율이 다른 톱밥-귤박 파티클보드의 동적 정적탄성계수와 휨강도를 측정, 비교하여 밀도와 귤박의 첨가율이 파티클보드의 역학적 성능에 주는 영향과 동적탄성계수와 정적 휨강도 성능사이의 관계를 조사하였다. 톱밥-귤박 파티클보드의 밀도가 0.4에서 $0.6g/cm^3$로 증가할수록 휨성능은 증가하여, 밀도가 휨성능에 크게 영향하였으며, 밀도 $0.4g/cm^3$와 $0.5g/cm^3$의 톱밥-귤박 파티클보드에서 귤박의 첨가량이 증가할수록 휨성능은 감소하는 경향을 나타내었다. 톱밥-귤박 파티클보드의 동적탄성계수, 정적탄성계수 그리고 휨강도 사이에 높은 상관관계가 확인되었으며 양단 자유 휨진동시험에 의한 동적탄성계수로부터 비파괴적으로 정적 휨강도 성능의 예측이 가능할 것으로 사료되었다.

• 농업과학연구
• /
• 제23권1호
• /
• pp.120-130
• /
• 1996

본 연구는 세골재는 사용하지 않고 인공경량조골재로써 팽창점토와 경석을 사용하여 제작된 인공경량골재 콘크리트의 응력-변형율특성을 구명하기 위하여 실시되었으며, 시험을 통하여 얻어진 결과를 요약하면 다음과 같다. 1. 동탄성계수는 인공경량조골재인 팽창점토와 경석을 사용한 경우 $1.9{\times}10^5kg/cm^2$과 $2.0{\times}10^5kg/cm^2$으로 나타났으며, 경석을 사용한 경우가 5%정도 크게 나타났다. 2. 정탄성계수는 팽창점토 및 경석을 사용한 경우 $1.8{\times}10^5kg/cm^2$과 $1.6{\times}10^5kg/cm^2$으로 나타났으며, 정탄성계수는 동탄성계수보다 10~30%정도 작게 나타났다. 3. 사용골재에 따른 하중-이력곡선은 하중이 증가하여 최대하중에서 파괴가 이루어진 후 급격히 감소하는 경향을 보였으며, 특히 기포제를 첨가한 경우는 최대하중에서 파괴된 이후에도 상당시간 내하능력을 유지하는 것으로 나타났다. 4. 응력-변형율곡선은 사용골재의 종류에 관계없이 응력의 증가와 함께 증가하여 최대하중에서 파괴가 된 후 급격히 감소하는 경향을 보였으며, 취성이 크다는 것을 알 수 있었다. 5. 최대응력하에서의 변형율은 팽창점토를 사용한 경우 $1.7{\times}10^{-3}$, 경석을 사용한 경우는 $2.83{\times}10^{-3}$로써, 팽창점토보다 경석을 사용한 경우의 변형율이 66%정도 크게 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.357-364
• /
• 1999

In recently site investigations, the need for the determination of dynamic soil properties such as dynamic modules of rigidity, elasticity, dynamic poison's ratio and damping ratio etc. is increasing for the astigmatic designs of the civil structures. To obtain some of the dynamic properties, measurement of elastic waves velocity, both P and S wave, is required. Among various methods to measure elastic wave velocity such and Down Hole, Cross Hole and Refraction etc., Suspension P.S. Logging has an advantage to use for the off-shore investigation where generation of the shock wave and traveling of the wave is difficult. In suspension P.S. logging, specially designed prove equipped with source of shock wave, two 3-channel receivers, departing 1m distance, and other auxiliary facilities is inserted down in a bore hole bottom and raised in predetermined interval, usually 1m or 2m, and measurement is conducted. P.S. logging have been conducted in a off-shore construction project near InChon in the west coast for the first in the country, and form the result, potential of the liquefaction of the subsoil was evaluated and compared with the conventional method.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.13-20
• /
• 2005

This paper deals with flexural vibration techniques as a means of predicting bending strength properties for quarter-sawn and flat-sawn planes of red pine containing knots. Dynamic modulus of elasticity $(MOE_d)$ was calculated from resonance frequency obtained from the flexural vibration induced by a magnetic driver in quarter-sawn and flat-sawn planes of red pine containing knots. The dynamic MOE were well correlated to bending strength properties. Their correlation coefficients ranged from 0.866 to 0.800 for the regression between dynamic MOE and static bending MOE or MOR. The difference of the values between quarter-sawn and flat-sawn was very small. These values were higher than correlation between percentage of total knot diameter to total width of red pine specimen $(K_T(%))$ as well as $K_O(%)$ base upon ASTM D 3737 and static bending strength properties (correlation coefficient r = 0.448~0.704), and were similar to those between static bending MOE and bending MOR (r = 0.850). These results indicate that dynamic MOE obtained from resonance frequency induced by flexural vibration of magnetic driver is able to effectively use for predicting of static bending strength of red pine containing knots as well as static MOE.

• Ocean Systems Engineering
• /
• 제1권1호
• /
• pp.95-111
• /
• 2011

Increasing numbers of floating offshore wind turbines are planned and designed these days due to their high potential in massive generation of clean energy from water depth deeper than 50 m. In the present study, a numerical prediction tool has been developed for the fully-coupled dynamic analysis of FOWTs in time domain including aero-blade-tower dynamics and control, mooring dynamics, and platform motions. In particular, the focus of the present study is paid to the dynamic coupling between the rotor and floater and the coupled case is compared against the uncoupled case so that their dynamic coupling effects can be identified. For this purpose, a mono-column mini TLP with 1.5MW turbine for 80m water depth is selected as an example. The time histories and spectra of the FOWT motions and accelerations as well as tether top-tensions are presented for the given collinear wind-wave condition. When compared with the uncoupled analysis, both standard deviations and maximum values of the floater-responses/tower-accelerations and tether tensions are appreciably increased as a result of the rotor-floater dynamic coupling, which may influence the overall design including fatigue-life estimation especially when larger blades are to be used.