• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.25-28
• /
• 2000

The flow stress of 304 stainless steel during high during hot forming process were determined by conducting hot compression tests at the range of 1273 K-1423 K and 0.05 /s-2.0 /s as these are typical temperature and strain rate in hot forging operation. Based on the observed phenomena, a constitutive model of flow stress was assumed as a function of strain, strain rate, temperature. Dynamic recrystallization was found to be the major softening mechanism with this conditions as previous studies. A finite element analysis was performed to predict the recrystallized volume fraction and the mean grain size in hot compression of 304 stainless steel.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.101.1-101
• /
• 2002

Vehicle driving simulator is a virtual reality device which makes a human being feel as if the one drives a vehicle actually. Unlike actual vehicle, the simulator has limited kinematic workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model fully. In order to overcome these problems, washout algorithm which restricts workspace of the simulator within the kinematic limits is needed, and analysis of dynamic characteristics is required also. However, it is difficult to select the proper cutoff frequency of filters in washout algorithm. This paper introduces the signal compression method as an effective method to analyze the sim...

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.741-744
• /
• 2003

in this paper, we propose a dynamic-based compression system by creating mosaic background and transmitting the change information. A dynamic mosaic of the background is progressively integrated in a single image using the camera motion information. For the camera motion estimation, we calculate perspective projection parameters for each frame sequentially with respect to its previous frame. The camera motion is robustly estimated on the background by discriminating between background and foreground regions. The modified block-based motion estimation is used to separate the background region.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.168-170
• /
• 1997

This paper presents the dynamic analysis of a reciprocating actuation system based on moving magnet actuator for gas compression. For the analysis of the linear actuator, an axisymmetric finite element method (FEM) considering the saturation effect of the magnetic material is used, and electrical circuit equation, mechanical dynamic equation and pressure dynamics are coupled. In the FE analysis, we adopt a moving line technique. The pressure dynamics of the gas in the compressor is modeled by using the law of thermodynamics. The analysis results are compared fairly well with experimental ones.

• Structural Engineering and Mechanics
• /
• v.3 no.3
• /
• pp.229-244
• /
• 1995

The parametric instability behaviour of a plate subjected to localized in-plane compressive or tensile periodic edge loading is studied, considering the effects of damping into the system. Different edge loading cases have been considered. Damping has been introduced in the form of proportional damping. Dynamic instability behaviour under compressive or tensile periodic edge loading shows that the instability regions are influenced by the load band width and its location on the edge. The effects of damping on the instability regions show that there is a critical value of dynamic load factor beyond which the plate becomes dynamically unstable. The critical dynamic load factor increases as damping increases. Damping generally reduces the widths of the instability regions.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2019

Background: The purpose of this study was to determine the effects of a pelvic compression belt on gait abilities and balance in subacute stroke patients. Methods: Twenty two patients with subacute were recruited and randomly assigned into two group: Two group offered conventional physical therapy and occupational therapy for five day. The group was composed of twelve patients. Participants in the experimental group were given the pelvic compression belt and conventional physical therapy, conventional occupational therapy, although conventional physical therapy and occupational therapy provided in the subjects in the control group. To assess the gait ability, the GAITRITE system was used and the Balance system SD was used to test balance. All measurements were performed before and after intervention. Results: The experimental group shows a significant improvement the cadence, velocity, step length and stride length in gait (p<.05) and show significant increase in the dynamic standing balance (p<.05). However, control group shows a significant improvement the cadence, velocity, step length and stride length in gait (p<.05), but shows no significant differences in dynamic standing balance. Furthermore, there were significant differences gait velocity, dynamic standing balance between two groups (p<.05). Conclusions: The results demonstrated that the elastic pelvic belt application is effective to improve gait velocity, dynamic balance in the subacute stroke patients. Thus, the elastic pelvic belt is seemed to be one of the potential methods to facilitate the active rehabilitation program for hemiplegia patients.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.93-100
• /
• 2019

Dynamic Compressors in vocal recordings of modern pop music are essential equipment. Dynamic compressors are applied not only to the mix for listening to music but also to the monitor for the singer to listen to his voice along with the accompaniment while the singer is recording. This study is an experimental study on the effects of a dynamic compressor applied to a monitor environment on the vocal performance of a singer. 10 participating singers participated in the blind test to test how the vocals heard through the monitor would be affected by the 1:1, 2:1 and 4:1 compression ratio. Experimental results show that the higher the compression ratio applied to the monitor, the bigger the song, the brighter the tone, but the pitch becomes finer inaccuracy on the bigger dynamic part of the song. In post-interviews with blinds, it was found that singers generally preferred to hear compressed sound through a compressor on the monitor. Since the music used in the experiment was a ballad with a wide dynamic range, it could not be generalized to all kind of music recordings, but it could provide important implications for the monitoring of recording sites. In addition, We hope that the cognitive science approach to recording technology will be added based on this paper which has been studied through empirical studies on the effect of the monitor environment on the singing voice.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.295-303
• /
• 2018

The semi-analytical method to study the nonlinear dynamic behavior of simply supported spiral stiffened functionally graded (FG) cylindrical shells subjected to an axial compression is presented. The FG shell is surrounded by damping and linear/nonlinear elastic foundation. The proposed linear model is based on the two-parameter elastic foundation (Winkler and Pasternak). A three-parameter elastic foundation with hardening/softening cubic nonlinearity is used for nonlinear model. The material properties of the shell and stiffeners are assumed to be FG. Based on the classical plate theory of shells and von $K{\acute{a}}rm{\acute{a}}n$ nonlinear equations, smeared stiffeners technique and Galerkin method, this paper solves the nonlinear vibration problem. The fourth order Runge-Kutta method is used to find the nonlinear dynamic responses. Results are given to consider effects of spiral stiffeners with various angles, elastic foundation and damping coefficients on the nonlinear dynamic response of spiral stiffened simply supported FG cylindrical shells.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.167-170
• /
• 1997

For the optimal net shape forging of semi-solid materials (SSM), it is important to predict the deformation for variation of strain rate. It should be necessruy to conduct a formation of stress-strain curve in semi-solid alloys for analysis of the thixoforming process. Particularly, important problem to application of computer aided engineering in SSM processing is to prevent a segregation of liquid component during compression process. The liquid segregation is studied as multistage change of the strain rate and test piece size to prevent the liquid segregation during the compression process. The compression test for semi-solid aluminium alloy with a controlled solid fraction is performed by dynamic material test system with a furnace. Moreover morphology of structure and fraction of pore are investigated through compression test.

• Structural Engineering and Mechanics
• /
• v.52 no.4
• /
• pp.687-699
• /
• 2014

Based on the energy method considering the second order effects, the natural frequencies of externally prestressed simply supported beam and the compression softening effect of external prestress force were analyzed. It is concluded that the compression softening effect depends on the loss of external tendon eccentricity. As the number of deviators increases from zero to a large number, the compression softening effect of external prestress force decreases from the effect of axial compression to almost zero, which is consistent with the conclusion mathematically rigorously proven. The frequencies calculated by the energy method conform well to the frequencies by FEM which can simulate the frictionless slide between the external tendon and deviator, the accuracy of the energy method is validated. The calculation results show that the compression softening effect of external prestress force is negligible for the beam with 2 or more deviators due to slight loss of external tendon eccentricity. As the eccentricity and area of tendon increase, the first natural frequency of the simply supported beams noticeably increases, however the effect of the external tendon on other frequencies is negligible.