• 한국농공학회논문집
• /
• 제58권3호
• /
• pp.91-100
• /
• 2016

Recently, lots of damages have been lost because large magnitude earthquakes were occurred in the world. It has been increased the number of earthquakes in Korea. It needs improvement required for the repair of deteriorated reservoirs, reinforcement and raised reservoir coping with climate change and earthquake. This study aims to investigate the seismic behavior of deterioration reservoir levee using dynamic centrifugal model test. Therefore, two case tests in centrifugal field of 60 g, the result has provided the influence on the acceleration response, displacement, settlement and the pore water pressure of the reservoir with earthquakes. From the results larger displacement and acceleration response at the front side of reservoir embankment with poor-fabricated core in seismic condition may degrade overall stability. Reasonable reinforcement method of the raised reservoir embankment is required for ensuring long-term stability on earthquake.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.672-677
• /
• 2001

This study has been conducted to design the high efficiency centrifugal compressor for a HFC-134a. The 2-stage centrifugal compressor consists of inlet guide vanes, two impellers with splitters, a deswirler, a vaneless diffuser and a volute casing. We have designed the high efficiency centrifugal compressor by applying the repeated design procedure including a meanline design, a 3D geometry generation of 1st and 2nd impellers etc. Also, a fluid dynamic calculation of impellers and deswirler have been conducting using a commercial code STAR-CD.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.209-217
• /
• 2013

In order to verify the reliability of numerical site response analysis program, both soil free-field and base rock input motions should be provided. Beside the field earthquake motion records, the most effective testing method for obtaining the above motions is the dynamic geotechnical centrifuge test. However, need is to verify if the motion recorded at the base of the soil model container in the centrifuge facility is the true base rock input motion or not. In this paper, the appropriate input motion measurement method for the verification of seismic response analysis is examined by dynamic geotechnical centrifuge test and using three-dimensional finite difference analysis results. From the results, it appears that the ESB (equivalent shear beam) model container distorts downward the propagating wave with larger magnitude of centrifugal acceleration and base rock input motion. Thus, the distortion makes the measurement of the base rock outcrop motion difficult which is essential for extracting the base rock incident motion. However, the base rock outcrop motion generated by using deconvolution method is free from the distortion effect of centrifugal acceleration.

• 한국지반공학회논문집
• /
• 제37권6호
• /
• pp.39-50
• /
• 2021

최근 국내에 리히터 규모 5.0 이상의 지진의 빈도수가 늘어남에 따라 지진피해가 늘어나면서 내진설계에 대한 많은 연구와 관심이 높아져 가고 있는 실정이다. 최근 발생한 포항지진에 의해 많은 피해가 발생하였고, 항만시설물 또한 피해가 발생하였다. 본 연구에서는 항만구조물 중 외곽시설인 직립식 방파제의 지진 시 발생하는 동적 거동을 원심모형실험을 통해 분석하였다. 이를 위하여 상사법칙을 적용한 직립식 방파제 모형에 포항지진파, 인공지진파 I, II의 총 세 가지 지진파를 적용하고, 지반에 대하여 DCM보강, 사석치환의 두 가지 방식의 보강을 한 경우를 고려하여 원심모형실험을 수행하였다. 그 결과 획득한 지진 시 직립식 방파제의 동적 거동에 대하여 가속도, 수평·수직 변위를 분석하여 내진안정성을 검토하였다. 검토 결과 방파제 기초지반이 DCM보강 및 사석치환을 통해 지지력 및 강성이 높아짐에 따라 가속도 증폭이 억제되는 경향을 나타내었다.

• 토지주택연구
• /
• 제6권3호
• /
• pp.147-152
• /
• 2015

현재, 국내의 내진설계기준에서 제시하고 있는 지반분류 방법과 지반 증폭계수는 깊은 기반암 조건의 미국 서부 해안지역 지반에 적합하도록 제시되어 있으므로 기반암이 약 30m 미만인 우리나라와는 다른 동적 거동을 나타낸다. 선행연구에 의하면, 말뚝 기초에 대한 원심모형 실험결과와 동적 지진 해석결과는 우리나라에서 사용하고 있는 설계스펙트럼의 가속도 값보다 주기 1.5초 부근에서는 낮게 나타나고 있다. 따라서, 본 논문에서는 원심모형 실험결과에서 얻어진 설계스펙트럼 가속도를 사용하여 구조해석을 수행하고 기존의 설계기준과 대비하여 철근 및 콘크리트의 물량 등을 상호 비교하여 아파트 골조공사의 경제성을 비교, 검토하였다. KBC-2009 기준의 Sc 지반과 SD 지반을 사용하여 구조해석 및 내진설계를 수행하고, SD에 해당하는 지반의 동적 지진 실험결과의 스펙트럼가속도(SDS)를 사용하여 구조해석 및 내진설계를 수행하여 상호 비교 고찰한 결과, 지반의 종류 SD 지반에 해당하는 연약지반의 경우라도 동적 실험 및 해석을 수행하여 지반의 스펙트럼 가속도를 산정하여 구조해석에 적용할 경우 Sc 지반과 유사한 정도의 철근 물량 값을 얻을 수 있었고, 이것은 당초 연약지반으로 고려되던 SD 지반으로 설계하는 경우에 비하여 17~23% 정도의 물량을 절감할 수 있는 것으로 나타났다.

• 토지주택연구
• /
• 제5권1호
• /
• pp.35-40
• /
• 2014

현재 국내 내진설계기준에서 제시하고 있는 지반분류 방법 및 지반 증폭계수는 기반암이 주로 30m 이내에 위치하는 일반적인 국내 지반특성을 제대로 반영하지 못하고 있다. 따라서, 본 연구에서는 사질토 지반에 근입된 비정형 말뚝기초(PHC 500, 중심 간격 3D, 4D, 5D)와 상부 구조물에 대한 동적 원심모형 실험을 실시하여 자유장과 기초판의 응답 스펙트럼 결과를 비교하였다. 단주기 영역인 1초 이내 주기에서는 기초판 및 지표면 자유장의 측정 스펙트럼이 SC 및 SD 지반의 표준설계스펙트럼 가속도보다 크게 나타났다. 1.5초 이상의 장주기 영역에서는 실험에서 측정된 스펙트럼 가속도가 SC 지반의 표준설계응답스펙트럼 가속도보다 작게 나타났고 상부구조물 유무, 지반 근입 심도, 기초 및 자유장 조건에 의한 스펙트럼 가속도 차이가 거의 발생하지 않았다. 따라서, 실제 아파트에 해당하는 1.5초 이상의 장주기에서는 국내 지반조건을 고려하여 측정된 스펙트럼 가속도를 설계에 적용하면 표준설계스펙트럼을 적용할 때 보다 경제적인 설계가 가능한 것으로 나타났다.

• 소음진동
• /
• 제5권2호
• /
• pp.215-224
• /
• 1995

In this paper, the three-dimensional finite element model is established to investigate the structural dynamic characteristics of rotor blade using a finite element analysis. Six natural frequencies and mode shapes are calculated by computer simulation. The first three flapping modal frequencies, the first two lead-lag modal frequencies, and the first feathering modal frequency are validated through comparison with the modal test results of the fixed rotor blade. The computer simulation results are found in good agreement with experimentally measured natural frequencies. The important results are obtained as follows: (1) Natural frequencies are changed due to the variation of rotational speed and fiber angle of rotor blade, (2) Weak coupling between flapping mode shape and lead-lag mode shape are detected, (3) Centrifugal force has more effect on flapping modal frequency than lead-lag modal frequency.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.44-50
• /
• 2002

The connecting rod big-end bearing is one of the most heavily loaded components of the lubrication system of high-speed combustion engines. The supply oil flow has to pass to the main bearing and the rotating crankshaft before entering the connecting rod bearing. It is common knowledge that the centrifugal forces due to the crankshaft rotation influence the oil flow to connecting rod bearing through the oil supply bore, especially, when the oil supply system to the connecting rod bearing has a 180$^{\circ}$circumferential groove via a single drilling in the crankshaft. In this case, it should be confirmed that the groove oil pressure in the main bearing is sufficient to overcome these centrifugal forces. For the purpose, the dynamic oil pressure before entering oil supply bore to the connecting rod bearing was measured instead of averaged oil pressure in main gallery. Experimental test results show that the dynamic oil pressure in the oil groove was more useful than that of main gallery. And it was also found that the oil pressure fluctuation in the groove was sensitively affected by the reduction of the main bearing clearance.

• Corrosion Science and Technology
• /
• 제10권6호
• /
• pp.218-224
• /
• 2011

The fresh water and sea water in present ships is used as cooling water for marine engine. Therefore, corrosion damage in seawater system is frequently occurred. In particular, in the impeller of pump, the performance and material span due to the corrosion and cavitation erosion has adverse effects. Most of the pump impellers in vessels are used Cu-Al alloy. Cu-Al alloy which having the excellent mechanical properties and corrosion resistance is widely used in marine environments. However, despite the excellent characteristics, the periodic replacement parts due to the cavitation damage in seawater is vulnerable to economic viewpoint. In this study, Cu-Al alloy used with impeller for centrifugal pump were conducted various experiments to evaluate its characteristics in seawater and fresh water solutions. As an electrochemical result, the dynamic conditions that exposed to the cavitation environment presented high corrosion current density with collapse of the cavity compared with the static conditions. Cavitation test results, the weightloss and weightloss rate in fresh water are observed more than those of seawater.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.187-194
• /
• 2015

This paper describes the PI controller design based on a practical transfer function model for centrifugal water chillers. The rotational speed of a compressor and the opening angle of an electronic expansion valve were simultaneously regulated as manipulated variables to maintain temperature reference and to ensure high efficiency of the chiller. The COP according to the change in each variable was investigated by performing some static experiments, and it was reflected in the PI controller design to accomplish the high efficiency control. Especially, the practical transfer function model of the chiller was built based on the dynamic experimental data considering the strong inherent non-linearity and complexity of the chiller system. The validity of the designed PI controller was proven by some experimental results using the test facility and the results were also compared to the conventional evaporating pressure control results.