• 복식
• /
• 제36권
• /
• pp.109-119
• /
• 1998

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Caseaslpinia Sappan, L. and Brazilin were studied. Appropriate extraction, dyeing and mordanting condition of Caeaslpinia Sappan, L. were determined, and the effect of mordanting method on dye up-take adn color fastness of dyed fabric was investigated. The most absorbance of Caeaslpinia Sappan, L. solution was 445nm, Brazilin was 448nm. The color of bazilin solution was affected by pH 7~9. The optimum temperature to extract Caesalpinia Sappan, L. was 10$0^{\circ}C$ adn dyeing solution for 1 hour. In case mordants concentration, the most absorbance was 0.3%. In case mordanting test, the best and proper temperature to quantities of absorbed mordants in silk was 8$0^{\circ}C$ and the most quantities of absorbed mordants in silk was mordant treatment by Cu. Effective dyeing time to silk was 60min. Effective mordanting temperature was 8$0^{\circ}C$, and its time was 30min. K/S value of dyeing fabrics was recoginazed by mordanting treat-ment, specially Fe, Sn, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. After soaping treatment K/S value of pre- and post-mordanting silk was decreased and 0.1%(W/V) quantity of mordant was sufficient for treatment. In the case of Caeaslpinia Sappan, L. fastness was increased by mordanting treatment. Mordants and mordanting treatment method affected the amount of absorption and color change of dyed silk.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.336-346
• /
• 2011

Dyeing properties of protein fiber with bamboo colorants were studied by investigating the effect of dyeing conditions such as dye concentration, dyeing temperatures, times on dye uptakes, effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use. In addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. The dye uptake increased as the dyeing concentration increased. Bamboo colorants showed relatively good affinity to protein fiber and produced a yellow color. Dye uptake increased as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for increasing dye uptake. The color of fabric mordanted with Cu and N.Cu changed to GY. Colorfastness of dyed fabrics showed a relatively good rating, and mordanting had no significant effect on colorfastness. Dyed silk fabric showed very good antimicrobial abilities of 99.9%. Also, ultraviolet-cut ability and deodorant ability were improved in silk fabric dyed with bamboo extracts.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.8-17
• /
• 2012

In order to dye nylon/cotton blended fabrics in solid colors with only acid dyes, a hetero-bifunctional bridge compound (DBDCBS) was examined. The bridge compound was designed to react only onto cotton fabrics first, on which amino-containing acid dyes react later by covalent bonding. By the effect of DBDCBS, amino-containing acid dyes exhibited high affinity toward the cotton fabrics. From the dyeing properties examined at various conditions, the optimum dyeing was decided at pH 4 and $100^{\circ}C$. Consequently, the solid color was obtained on nylon/cotton blended fabrics in one bath dyeing process using only acid dyes. The DBDCBS did not show any negative effect on nylon side in terms of dyeing and physical properties.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.76-86
• /
• 2016

In this research, the dyeing properies of Amur cork tree on sheep leathers were evaluated. The proper dyeing conditions were identified with K/S values depending on the colorant concentration, dyeing time, dyeing temperature and dye bath pH. For the proper conditions, the changes of color for different mordants(Al, Cu and Fe) were observed as $L^*a^*b^*$ coordinates and H V/C values. The color fastnesses were also examined, and the antimicrobial properties were examined. The results were as follows: For the sheep leather, the optimized dyeing conditions were 300% o.w.f., 40 min., $40^{\circ}C$, and pH 5. The leather color was yellow in the dyeing and mordanting. Although the $L^*a^*b^*$ changed with the mordants and mordanting methods, the overall hue was yellow. The colorfastness to light was reduced compared to original(untreated) sheep leather. The rubbing fastness was generallry satisfactory as 4-5 rating. The dry-cleaning fastness(stain) of leathers were generally at the 4-5 level, but dry-cleaning fastness(fade) was a little reduced compared to original sheep leather. The dyed and pre-mordanted and dyed sheep leather showed excellent antimicrobial properties.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.321-326
• /
• 2004

[ $TiO_2$ ] contents in yarns can influence color yield so that dyeing quality of industrial polyethylene terephthalate (PET) yarns can be improved through the adjustment of $TiO_2$ contents. To evaluate the dyeing performance of color yield, the chips which included the different $TiO_2$ contents of 330,550, and 1,100 ppm respectively were used to produce the yarns of different $TiO_2$ content by a spin-draft machine. The physical and structural properties of the yarns were measured to investigate effect of the $TiO_2$ contents on them. Dye uptake and dyeing rate were also evaluated using a colorimeter to compare the yarns having different TiOz contents. The experimental results showed that there were no appreciable variation in physical and structural properties among the yarn samples and no difference were observed among the dyed fabric samples with regard to dyeing uptake and dyeing rate. However, the color yield of dyed fabrics increased as $TiO_2$ contents decreased in the yarns especially when the fabric samples were dyed to pale shade. The physical reasoning could be proposed on why the yarns having low $TiO_2$ contents appeared to have higher color yield after dyeing.

• 대한가정학회지
• /
• 제42권7호
• /
• pp.55-61
• /
• 2004

The Purpose or this study was to determine the optimal dyeing condition or Chelidonium majus extracts onto silk fabrics. Among the various dyeing properties, the colorfastness of fabrics dyed with Chelidonium majus extracts was investigated in different conditions such as dyeing temperature, dyeing time, dyeing pH etc. We also tried to dye fabrics using the Chelidonium majus extracts which were lyophilized. Although mordant was not used, dyed fabrics showed relatively good dyeability and the main pigment of Chelidonium majus showed yellow vividly in the appropriate dyeing conditions. At a dyeing temperature above 40$^{\circ}C$, the $\Delta$E value increased but the yellowish tint decreased. The pH value of unadjusted Chelidonium majus extracts was 6.4, at which a deep yellow was obtained. The dye equilibrium was reached 40 minutes after dyeing. The colorfastness to washing and light was poor at 1-2 and 2-3, respectively, but the dry-cleaning fastness was good at 4-5.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.609-609
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.