• 방사선산업학회지
• /
• 제8권2호
• /
• pp.71-76
• /
• 2014

Endocrine disrupting chemicals (EDCs) and potential EDCs are mostly man-made, found in various materials such as pesticides, additives or contaminants in food, and personal care products. The high energy ionizing radiation has the ability to remove the EDCs with a very high degree of reliability and in a clean and efficient manner. The ionizing radiation interacts with EDCs both directly and indirectly. Direct interaction takes place with EDCs and the structure of EDCs is destroyed or changed. During indirect interaction, radiolysis products of water result in the formation of highly reactive intermediates which then react with the target molecules, culminating in structural changes. To confirm the radiation reduction of EDCs in industrial sludge, a pilot scale experiment up to 50 kGy of electron beam (EB) was conducted with samples from the textile dyeing industries. The experimental result showed the over 90% of reduction of Nonylphenol (NP) and Di(2-ethylhexyl) phthalate (DEHP) at around 10 kGy of absorbed doses.

• 한국염색가공학회지
• /
• 제20권3호
• /
• pp.18-24
• /
• 2008

The purpose of this study is to develop the dyeing method with dry leaves of indigo plant. Coloring matter was extracted from dry leaves of indigo plant with hot sodium hydroxide solution. The extract was reduced with sodium dithionite, and it was used for dyeing cotton fabrics under various conditions. UV-visible absorption spectra of extract, reduction rate of extracts by reducing agent, and the surface color of dyed cotton, lightfastness were examined. For the initial 20 minutes, the absorbance of indigo solution rapidly decreased. However, several hours later, the decreasing rate retarded. By repeating the dyeing process, the shade looked deeper and deeper. At $30-40^{\circ}C$, the value of K/S reached the highest point. The concentration of indigo solution in dye bath seemed to playa critical role for the reaction of the reducing agent. It was observed that the surface color of cotton fabrics was getting bluish and its degree of value and chroma seemed slightly decreased as the K/S value was increasing. The lightfastness was clearly enhanced by increasing the K/S value.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.1-14
• /
• 2010

To investigate natural dyeing properties of bast fiber, properties of pre mordanting dyeing of sappan wood, gardenia and gallnut such as K/S values, developed color, and fastness were evaluated. Silk showed the most increased K/S values by pre mordanting treatment when Fe was uses as a mordant. The optimized amount of Fe was 3%. The colors of sappan wood was a series of YR. After pre mordanting treatment with Fe, the colors of bast fiber of mulberry and silk showed a series of RP, and the color of cotton showed a series of Y. The color of gallnut was a series of Y regardless of pre mordant treatment. Sappon wood (YR), gardenia (Y), and gallnut (Y) showed various colors such as YR, R, and RP, respectively. Sunlight fastness was not improved by pre mordanting treatment. The effect of pre mordanting treatment was not good. Especially the treatment with Al showed poor sunlight fastness.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.82-87
• /
• 2010

The Hanji dyed with persimmon juice were useful goods in the past, but they are not widely used nowadays despite of their many strong points such as antibacterial and water-resistant properties. The object of this study is to provide useful data for developing new products by using them. We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Diospyros kaki and investigated the effect of various dyeing factors (mordant, mordanting method, pH of dyeing solution, light exposure time etc.) on optical and mechanical properties of the dyed Hanji. Changing mordant affected the color of dyed Hanji. The dyed Hanji after-mordanted with Cu mordant had the highest K/S value and showed the deepest yellow and red shade. The best mordanting method was an after-mordanting. The K/S value of dyed Hanji increased with decreasing pH of dyeing solution. The tensile index and size degree values of the Hanji were increased after dyeing.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.36-46
• /
• 2011

The purpose of this study was to manufacture colored Hanji for interior materials by combining color therapy and natural dyeing. To manufacture colored Changhoji for interior materials, seven species of dyestuff were selected as a results of preliminary natural dyeing. As mordants, 0.5% $AlK(SO_4)_2{\cdot}12H_20$ and 0.5% $Cu(CH_3COO)_2{\cdot}H_2O$ solution were used respectively. To estimate natural dyeing properties of Changhoji, the value of $L^*,\;a^*,\;b^*$ and Munsell HV/C were measured by spectrophotometer. The super eight colors produced as follows; red from safflower, orang from goldthread and gardenia, yellow from turmeric, green and turquoise from indigo and pagoda tree flower, violet and magenta from sappanwood, and blue from indigo.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.112-119
• /
• 2019

This study had a purpose of further investigating and developing the usage of the eco-friendly functional dye that has physiological and pharmacological functions. This study was implemented complex dyeing method which used both natural dyes such as Gardenia jasminoides J.Ellis colorant, which are the yellow dyes that have high brightness and low chroma, and Xanthium strumarium L. extract. The silk fabrics were used to dye in various methods. They were also used to investigate functionalities dyed fabrics by various treating method, such as their color fastness, antibacterial activities and deodorization, the following were obtained. The fabrics that were dyed with herbs had decreasing brightness as the herbs extract concentrations were increased and had subtly changing chroma. But, because their K/S values were under 0.5, they were not properly dyed. Color fastness differed according to the natural dyes and herbs' complex dyeing order. The Color fastness was good when the fabrics were dyed with the colorant first, and then with the herb. When the fabrics were dyed with mixture dyeing solution, the natural dye and the herb extract, the herb didn't affect the dyeabilities of fabrics as much. When the fabrics were dyed with the mixture of the colorant and the herb extract, the dyeabilities didn't have much changes. However, their color fastnesses were improved a little bit due to the complex dyeing condition. When the fabrics were dyed with the mixture of the colorant and the herbs extract, their antibacterial activities and deodorization were increased.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.149-149
• /
• 2010

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.106-112
• /
• 2008

The purpose of this study is to define optimal conditions for wool blend fabric dyeing using Rhus verniciflua extract. K/S value, surface color change, the fastness to light, fastness to dry-cleaning, metal mordanting effects and antimicrobial activities were investigated. The results were summarized as follows; As the storage time of Rhus verniciflua stokes dyeing solution was longer, K/S was improved. K/S value showed the highest one when dyeing temperature and time were at 100oC and 60 minutes respectively. As for the changes of pH values of the dyeing solution, fabric was dyed well with the pH value of acid or neutral. K/S value recorded the highest at pH6 and the lowest at pH10. Fastness to light showed the unmordanted fabric is 2.84, and Fe is 1.69 on color difference. Antibacterial activities of Rhus verniciflua dyeing solution recorded high figures in both dyed fabric with unmordanted and dyed fabric with mordanting.

• 한국의류산업학회지
• /
• 제11권5호
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.