• 한국의류학회지
• /
• 제21권5호
• /
• pp.911-921
• /
• 1997

Recently the interest in natural dyeing has been increased because of the color clarity, natural grace and reactionism in fashion. Indigo dyeing, safflower dyeing and Gal-ott in Cheju-Do become generally known, so the study about the natural dyeing is continued with national intrust and support. In this study, 1 used artemisia for various dyeing tests because we can get it easily. 1 tested the dyeability in wool as well as cotton and silk with wormwood in natural dyeing material. I also dyed nylon with the same material for the comparison of the molecular structure. The mercerization and the chitosan treatment were done in cotton to improve the low dyeability in the natural dyeing. The result of this study are as follows; We have to dye repeatedly to get deep color in natural dyeing, and mordant treatment brought good result in color difference and dyeing fastness. 1. Compared with silk, wool and nylon, the dyeability of cotton was the worse. The color difference of cotton was 18.81 without mordants , and 24.05 with mordant. The dyeability of cotton was much increased by mordants such as potassiumdichromate, copper sulfate, iron sulfate and salt water. The color of cotton was turned into yellow-green in potassium dichromate and yellow-green with deep green in copper sulfate. The mercerization and the chitosan treatment of cotton made the improvement in color, dyeability, laundering fastness, abrasion fastness. 2. The color difference of silk was 3 times as high as cotton. It showed the similar degree with the chitosan treated-cotton. That is to say, silk had good dyeability because it contains amino group and carboxyl group. The dyebility of silk was increased by a mordant such as iron sulfate, potassium dichromate and salt water, Drycleaning fastness showed 5 grade, abrasion-fastness was high over 4~5 grade and sunlight fastness showed 1 grade in all case. 3. The color difference of wool was the best among four fabrics because of 18 kinds of amino acids. It is considered that the sulfate of wool has the polarity and help metal- mordants get the better dyeability such as potassium dichromate, iron sulfate, copper sulfate, and aluminum chloride. The color was reddish-green in potassium dichromate, yellow.greenin iron sulfate and copper sulfate, and yellow in the rest mordants. Drycleaning fastness of wool showed over 4~5 grade, abrasion fastness 5 grade. Sunlight-fastness 1 grade. 4. The dyeability of nylon was almost same because of the similar molecular structure with silk. The clarity of color was poor. The color was yellow-green in copper sulfate and yellow in the rest mordants. Laundering fastness and abrasion-fastness of nylon was good. Sunlight- fastness represented 1 grade.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.35-36
• /
• 2003

The purpose of this work is to investigate the surface modification of LDPE film via corona discharge treatment and subsequent graft polymerization, and their effect on the resulting dyeability is studied in terms of the surface functional groups, surface energetics, and acid-base interaction between the modified LDPE and the dyes used.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.819-827
• /
• 2000

The purpose of this study is to produce cotton fabric having improved dyeability and colorfastness as well as retaining the desirable durable press property. When cotton fabric was treated with additives, nitrogen content was increased as the additive concentration was increased. DP ratings and wrinkle recovery properties of BTCA treated cotton fabrics were greatly increased. But DP rating was lowered slightly by adding additives and wrinkle recovery property was decreased with the increase of additive concentration. Tensile strength was decreased by BTCA treatment but increased as additive concentration was increased. Various BTCA/additive treatments produced great affinity for reactive and acid dyes when dyebaths were adjusted at pH 3. It was showed that dyeability was increased as additive concentration was increased. The most effective additive for improving the dyeing properties of the crosslinked cotton was TEAㆍHCl. In case of reactive dye, there was almost no improvement on the dyeability of finished cotton by adding salt. Color fastness to washing and light of finished and dyed cotton were low except for the washfastness of reactive dye. Dyeing the BTCA/additive treated cotton fabrics with reactive dye had no effect on the physical properties.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.228-236
• /
• 1997

The browning characteristic and dyeability of the mushroom were examined to establish the optimum condition for browning and extraction in the process of obtaining the natural dye, brown colorant. The composition of browning extracts from mushroom was also analyzed and the dyeability were investigated. The results of this study are as follows, 1. The optimum condition for obtaining the browning colorant from mushroom was the crushed phase of sample. 2. The browning reaction by enzymes in mushroom was efficient at a temperature of 35$^{\circ}C$, a duratron period of 2 hr and pH of 8. 3. The optimum condition for extraction of browning extracts from browned mushroom was at 95$^{\circ}C$ and Ihr. 4. To analyze the content of browning extracts in the mushroom, three fractions were obtained from gel filtration using Sephadex G-25 and the fraction 1 was melanin and the fraction 3 was dihydroxyphenylanine (DOPA) and glutaminyldihydroxybenzene (GDHB) . 5. The turbidity in enzymatic browning extraction of mushroom increased depending on refrigeration storage (4$^{\circ}C$) and UV radiation. The filtration of the extracts resulted in a decrease of absorbance. 6. The dyeability of the fraction 1 was greater compared to that of the fraction 3 and that of wool greater compared to the other two fabric materiales.

• 한국의류학회지
• /
• 제35권4호
• /
• pp.431-441
• /
• 2011

Microbial colorants produced from Zooshikella sp. were developed as a reddish dye for fabrics. The reddish colorants were extracted from cell mass of Zooshikella sp. using 100% ethanol and were identified as prodiginine by 1H-NMR and FT-IR analysis. Microbial prodiginine had a maximum spectrophotomatric absorbance at 530nm and were chemically stable and 30 to $60^{\circ}C$. The microbial prodiginine could dye natural fibers such as cotton, silk, and wool as well as synthetic fibers such as nylon. The maximum K/S values of the dyed fiber were shown at 540 run with a color appearance of RP (reddish purple). Silk and nylon had an excellent dyeability among the experimental fibers. The optimum pH for the dyeing of experimental fibers was at pH 3.0 and dyeability was improved as the temperature increased. The cover change of dyed multifiber fabrics with the microbial prodiginine were measured after washing with detergents and a dry cleaning solvent for the selection of a proper fabric against microbial prodiginine. Among the experimental fibers, silk and nylon did not show significant color change after washing. Therefore, under the criteria of dyeability, silk and nylon were excellent fabrics for being dyed by microbial prodiginine.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.155-162
• /
• 2011

para-Aramid has limited dyeability because of its highly crystalline structure and compactness. To improve the dyeability of the para-aramid to reactive dyes of bright color in deep shade, the fabrics were photografted under continuous UV irradiation with dimethylaminopropyl methacrylamide and 4-benzoyl benzoic acid as a monomer and a hydrogen -abstractable photoinitiator respectively. A UV energy of 35J/$cm^2$ and a photoinitiator concentration of ten percent or more with respect to the monomer in the formulation was required for optimal photografting. Grafting yield increased with higher monomer application level. Surface analysis indicated significant alterations in the atomic composition of the photografted fabric surface and the fabric surface was covered with the grafted polymers. While the pristine para-aramid fabrics showed no appreciable dyeability to the ${\alpha}$-bromoacrylamide reactive dyes, the grafted para-aramid fabrics enhanced the dyeability to the reactive dyes substantially. In case of C.I. Reactive Blue 50, a K/S value of 8.7 can be obtained with the grafted para-aramid fabrics with a grafting yield of 2.3 %. Also the color fastness properties of the dyed fabrics was excellent in the conditions of washing, rubbing and light irradiation.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.7-13
• /
• 2005

Continuous and intense UV irradiation on PTT film using two types of UV bulbs at different irradiation power level was carried out to modify surface characteristics of the film including zeta potential, wettability, surface energy, and dyeability. ESCA analysis of the irradiated film showed higher O/C ratio than the untreated film indicating photooxidation of outer surface layer. ATR analysis showed that the ester bonds were broken and some new groups were produced such as carboxylic acid, phenolic hydroxy, and other esters, implying that ester bonds of PTT was responsible for the observed photooxidation effect. The surface of the treated PTT film became more hydrophilic and wettable to water, coupled with increased surface energy. Polar component of the surface energy increased and nonpolar component decreased with increasing irradiation energy. The treatment also decreased zeta potential of the modified surface and nanoscale roughness increased with increasing irradiation. The dyeability of the treated films to catonic dyes was significantly improved by electrostatic and polar interaction between dye molecules and the anionic film surface. The UV irradiation seems to be a viable polymer surface modification technology, which has advantages such as no vacuum requirement and continuous process unlike plasma treatment.

• 한국생활과학회지
• /
• 제19권4호
• /
• pp.709-717
• /
• 2010

This study investigated the properties and functions of wool and silk dyed with Catechu by examining the effects of dying conditions such as dye concentration, dying temperature, dyeing time, pH level and pre-mordants. These conditions were examined in relation to dye uptake and color changes, washing fastness, light fastness, ultraviolet-cut ability and antimicrobial ability of the dyed fabrics. Catechu showed good affinity to silk fiber. Langmuir adsorption isotherm was obtained, and so it was considered that ionic bondings are formed between Catechu and protein fiber. As the dyeing time and temperature is increased, the dyeability of both silk and wool fabrics also increases. At high temperatures the color of dyed fabrics changes from Y and YR to R. Wool is effective in using Al, Cu, Fe mordant, while silk is effective only in using only Cu mordants. The dyeability was shown to be improved at low pH levels. Additionally, both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causingby repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.87-95
• /
• 2000

The changes on shrinkage, dyeability, antimicrobial activities and other physical properties of wool fabrics by chitosan treatment were investigated. A acid dye, a basic dye and natural artemisia were used for dyeing of wool fabrics. For Antimicrobial test of wool fabrics, S.Aureus was used. As the results, The wool fabrics treated with chitosan showed a marked decrease in shrinkage. Dyeability increased slightly as concentration of chitosan treatment increased, Dyeability of acid dye was the highest than other dyes. On the other hand, the dyeability of basic dye on chitosan treated fabrics was lower than untreated fabrics. Reduction rates of colony of chitosan-treated wool fabrics showed from 64.8% to 85.24% as chitosan concentration increased. Reduction rates of colony of the chitosan-treated fabrics decreased by dyeing with acid and basic dye. But increased by retreating with chitosan. Fabrics dyeing with atremisia showed above 90% reduction rate against S.Aureus on all chitosan concentrations. The Tensile properties of chitosan-treated fabrics showed little decrease. The moisture regain and the air permeability was decreased on chitosan concentration on 0.1% but recovered as chitosan concentration increased. The warmth retention was increased a little by chitosan treatment. The drapeability became hard as chitosan concentration increased.

• 한국염색가공학회지
• /
• 제15권2호
• /
• pp.59-67
• /
• 2003

PTT[poly(trimethylene terephthalate)] fiber was annealed by passing on the plate heater to illuminate the effects of annealing on the mechanical properties and dyeability with varying the treatment temperature for 0.5 second. The apparent crystal sizes and crystallinity were increased with increases in temperature. With the increases of the temperature, the dynamic viscoelastic behaviors were analyzed to be reduction in $T_{max} (tan{\delta})$. The initial modulus were observed to be a small enhanced. The shrinkage in hot water were reduced. The dyeability for disperse dye enhanced dramatically, for example, a satisfactory degree of exhaustion was obtained by dyeing at $95^\circ{C}$ for 30 min with the PTT fibers heat treated at $180^\circ{C}$.