• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.23-32
• /
• 2016

This study examined the dyeability of fabrics dyed with rosemary, mint, sage, and thyme herb extracts. The herb extracts were pulverized and characterized by UV and FT-IR analysis. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were compared. The constituents of four different herbs were shown to be similar to each other. The dye uptake of rosemary and sage were shown to be larger than those of mint and thyme regardless of the fiber types. Affinity of herb colorants to protain fibers was higher than to cellulose fiber. Compared with silk and wool, the dyeability of cotton was the worse, the dye uptake of silk and wool fibers were increased along with dyeing time and dyeing temperature. As the dye uptake increased with increasing of the dye concentration, and its isothermal adsorption curves were langmuir type, indicating that ionic bonding was involved in the adsorption of herb colorants to the fibers.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.312-319
• /
• 2017

The treatment of dyeing wastewater is not easy because dyes are mainly aromatic, heterocyclic compounds. The most effective technologies and methods to treat dyeing wastewater are costly and involve materials that are difficult to regenerate after use. Therefore, it is necessary to develop cost-effective, eco-friendly technologies to treat dyeing wastewater. The aim of this study was to investigate the removal of sulfur blue 11 (CI 53235) anionic dye using methyl esterified sericite (ME-sericite) adsorbents in an aqueous solution. The results are discussed in terms of the ME-sericite particle size, temperature, pH value and initial sorption rate according to the initial sulfur blue concentration. In addition, we analyzed the adsorption kinetics using a Pseudo-second-order model with the desorption and reusability. The methyl esterification caused a considerable increase in the specific surface area from 4.45 to $17.62m^2/g$. The ME-sericite adsorbents successfully removed > 98% of the sulfur dye in the aqueous solution. For the adsorption of 1 mg of sulfur dye, approximately 4.6 to 6.6 g/L ME-sericite were required. The desorption process was carried out by mixing a NaOH eluent to desorb 90.56% of the sulfur dye with 2 h of contact time. Thus, the ME-sericite is a promising adsorbent to treat dyeing wastewater due to its low dose requirement, high removal efficiency and inexpensive material.

• 공업화학
• /
• 제22권2호
• /
• pp.224-229
• /
• 2011

입상활성탄에 대한 erythrosine의 흡착특성을 초기농도, 접촉시간 및 흡착온도를 변수로 하여 회분식실험을 통하여 조사하였다. Erythrosine에 대한 흡착동력학적 연구는 298 K에서 초기농도가 100, 250, 500 mg/L인 에리스로신 수용액에 대해 수행하였다. 흡착공정은 유사이차속도식에 잘 맞았으며 유사이차속도상수(k2)는 에리스로신의 초기농도가 높을수록 감소하였다. 에리스로신의 평형흡착관계는 298~318 K의 온도범위에서 Freundlich 등온식이 잘 적용되었다. 흡착자유에너지변화(${\Delta}G^o$), 엔탈피변화(${\Delta}H^o$), 엔트로피변화(${\Delta}S^o$)를 계산하여 본 결과, 표준자유에너지 변화량이 -3.72~-9.62 kJ/mol로 자발적인 공정임을 알았다. 엔탈피변화량이 양의 값을 나타내어 활성탄에 대한 에리스로신 염료의 흡착이 흡열반응임을 알 수 있었다.

• 자연과학논문집
• /
• 제13권1호
• /
• pp.35-50
• /
• 2003

점토광물은 첨단소재용 원료로서 석유, 펄프, 비료, 점결제와 페인트 등 사용분야가 다양한 광물이며, 이러한 천연 점토광물을 비교적 간단하게 처리하여 체내에 농축되면 독성과 피해를 일으키는 염료 폐수의 흡착처리 및 흡착 메커니즘에 대해서 조사하였다. 그 결과 유기염료를 흡착처리하기 위한 입상 점토광물제조의 최적조선은 굽기온도 $700^{\circ}C$이며, 점결제인 polyvinyl alcohol 의 량은 25% 이었다. 제조된 입상 점토광물의 pH는 중성이었고 산성 메디움에서의 안정한 pH의 범위는 3~9 사이였고, 비표면적은 $83m^2/g$ 이였다. 제조된 입상점토광물에 대한 유기염료의 흡착량은 산성 메디움에서 좋은 흡착결과를 보였고, 이때 흡착엔탈피는 -3.36~ -0.84 kcal/mol 로 전형적인 물리흡착임을 나타내었다.

• KSBB Journal
• /
• 제14권1호
• /
• pp.31-35
• /
• 1999

Penicillium janthinellum의 생균체와 변형 균체를 사용한 azo와 reactive계 염료의 생흡착에 대한 연구가 수행되었다. 반응액의 pH가 초기 흡착율과 탈색에 영향을 주어, 최적 pH는 3.0이었으며, 최적 온도는 $40^{\circ}C$이었다. Reactive계 염료인 Apollocion Red 7EB와 Apollfix Red SF-3B와 Apollocion Red HE-3B는 각각 초기 흡착율이 0.06, 0.086, 0.07mg/g.mm이었다. Azo와 reactive 계 염료들을 함유한 혼합염료도Pen janthinellum 균체에 흡착되어 0.084mg/g.min의 초기 흡착율을 보였다. Detergent 첨가시 탈색 백분율과 초기 흡착율은 대조군의 경우보다 낮았다. 또한 이온의 첨가는 염료의 흡착율에 영향을 미치지 않았다 Pen janthinellum의 변형 균체도 염료의 흡착율을 보였고, Apollocion Red 7EB의 흡착에 있어 이온교환수지보다 월등한 흡착능을 보였다.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.

• 대한화학회지
• /
• 제9권4호
• /
• pp.179-184
• /
• 1965

韓國産 酸性白土類 및 日本産 白土를 1NKCI 溶液으로 처리한 후 그 瀘液의 pH를 측정하므로써 그들의 酸性度를 결정하였다. 또 $KCI,\;NaCI,\;BaCI_2,\;Pb(NO_3)_2$ 및 $CuSO_4$ 들의 中性鹽溶液이 酸性度에 미치는 영향을 조사한 결과 위의 적은 順으로 그 영향이 작음을 알았고 이것은 $K^+>Na^+>Ba^{++}>Pb^{++}>Cu^{++}$의 順으로 Lyotrope 系列과 일치하였다. 그리고 cation 吸着후에 白土로부터 용출되는 $Al_2O_3$ 및 $Fe_2O_3$를 측정한 결과 溶出量이 酸性度에 대략 비례함을 알았다. 이 결과는 白土類의 酸性原因이 cation 交換에 의해서 1차적으로 생긴 HCI이 白土固體와 反應하여 溶出한 鹽化物이 加水分解를 일으켜 2차적으로 HCI을 형성한다는 小林, 山本들의 설명과 일치한다. 鹽基性 및 酸性色素의 水溶液에서 白土의 色素吸着率을 측정한 결과 酸性色素는 酸性度와 무관계하며 吸着되지 않았으나 鹽基性色素의 吸着率은 酸性度에 비례함을 보았다. 鹽基性色素吸着후의 pH는 固體酸의 酸性度에 비례하였으며 色素吸着率에도 비례하였으므로 鹽基性色素吸着은 中性鹽의 吸着메카니즘과 동일하다고 보았다. 本 實驗결과로부터 固體酸의 水溶液에서의 酸性原因, 色素吸着 메카니즘을 考察하게 되었다.

• Advances in nano research
• /
• 제3권2호
• /
• pp.111-121
• /
• 2015

$CoFe_2O_4$ nanotubes and porous nanorods were prepared via a simple one-pot template-free hydrothermal method and were used as an adsorbent for the removal of dye contaminants from water. The properties of the synthesized nanotubes and porous nanorods were characterized by electron diffraction, transmission electron microscopy and x-ray powder diffraction. The Adsorption characteristics of the $CoFe_2O_4$ were examined using polar red dye and the factors affecting adsorption, such as, initial dye concentration, pH and contact time were evaluated. The overall trend followed an increase of the sorption capacity reaching a maximum of 95% dye removal at low pHs of 2-4. An enhancement in the removal efficiency was also noticed upon increasing the contact time between dye molecules and $CoFe_2O_4$ nanoparticles. The final results indicated that the $CoFe_2O_4$ nanotubes and porous nanorods can be considered as an efficient low cost and recyclable adsorbent for dye removal with efficiency 94% for Cobalt ferrite nanotubes and for Cobalt ferrite porous nanorods equals 95%.

• 한국의류학회지
• /
• 제25권7호
• /
• pp.1314-1320
• /
• 2001

Dyeing properties of rosemary colorants on wool fabrics were investigated. Reosemary colorants were characterized by UV and FT-IR analysis. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change of colorfastness were explored. Rosemary colorants showed high affinity to wool fiber and its isotherm adsorption curve was Langmuir type. Therefore, it was considered that ionic bonding was involved in the adsorption of rosemary colorants to wool fiber. Rosemary colarants produced mainly yellowish color on wool fabric. The dyed wool fabrics showed generally high colorfastness except fastness to washing and light. Mordanting did not improve any colorfastness except that Sn mordant improved the light fastness. Bacterial reduction rate was increased up to 100% at 5% dye concentration. Therefore, antimicrobial activity of rosemary extract was confirmed.