• 유기물자원화
• /
• 제17권4호
• /
• pp.74-80
• /
• 2009

Carboxylated alginic acid bead를 이용한 중금속 제거에 관한 염색폐수의 영향에 대해 연구를 수행하였다. Carboxylated alginic acid bead를 담체로 사용하였을 때 때 납과 구리이온의 흡착에 미치는 염색폐수의 영향은 매우 작았다. 또한, 납 이온이 염색폐수와 같이 섞여 있을 때 흡착공정은 거의 2-3 시간 내에 이루어졌으며 50ppm의 납 이온은 0.3g의 담체만으로 대부분 제거 되었다. 이와 같은 결과는 Carboxylated alginic acid bead가 염색폐수 내에 존재하는 중금속 이온의 제거에 대해서 효과적인 흡착제임을 의미한다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.102-107
• /
• 2010

Dye-sensitized solar cell (DSC) has been expected to be an alternative to the conventional silicon solar cell due to simple manufacturing process and low fabrication casts. In order to improve productivity of DSC, we attempted to optimize the required time of the adsorption process. According to the change in the adsorption time from 1 to 24h, We analyzed the output characteristics and the change of internal impedance. As a result, The outputs of DSC were continuously increased until 12h of the adsorption time and remained the same after that. Also, We reconfirmed this result that 12h was optimum adsorption by the analysis of the electrochemical impedance spectroscope because the internal impedance was similar to the output.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• 공업화학
• /
• 제27권2호
• /
• pp.199-204
• /
• 2016

입상 활성탄을 사용하여 수용액으로부터 Rhodamine-B 염료의 흡착에 대해 조사하였다. 회분식 실험은 흡착제의 양, pH 초기농도와 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir 등온식에 잘 맞았다. 평가된 Langmuir 분리계수($R_L$ = 0.0164~0.0314)로부터 이 흡착공정이 적절한 처리방법이 될 수 있음을 알았다. 흡착속도실험결과는 유사 1차 반응속도식에 잘 맞는 것으로 나타났다. 음수값의 Gibbs 자유에너지(-4.51~-13.44 kJ/mol)와 양수값의 엔탈피(128.97 kJ/mol)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타냈다. 등량흡착열은 흡착된 염료분자들의 측면상호작용에 따라 표면부하량이 증가할수록 커졌다.

• Journal of Photoscience
• /
• 제7권1호
• /
• pp.9-13
• /
• 2000

An alternately assembled polycation-anionic dye film was prepared on a precursor assembly of poly(allylamine)hydrochloride (PAH) and poly(sodium styrenesulfonate) (PSS) or of poly (djallyldimethyl)ammonium chloride (PDDA) and PSS. The (PAH/PSS) precursor assembly gave better adsorptivity to the anionic dye than the (PDDA/PSS) one. Four kinds of anionic dyes (EB-T, AR-17 AR-18, AR-27) with different numbers of sulfonate substituents were compared. The extent of dye assembling was higher for the dye with a smaller number of sufonate substituents. Second harmonic generation (SHG) was clearly observed from the films. The SHG signal and the absorption intensity correlated well up to four polycation/dye bilayers, while further assembly did not increase the SHG signal appreciably. Second order nonlinear coefficients for ten bilayer assemblies were the order of pm/V.

• 대한화학회지
• /
• 제9권4호
• /
• pp.185-189
• /
• 1965

韓國産 酸性白土類 및 silica gel을 aniline yellow, o-nitro aniline, oil orange 色素 benzene 溶液과 작용시켜 非水溶液에서의 色素吸着率을 측정하였다. 그 吸着率은 silica gel이 酸性白土類보다 컸으며 酸性度에는 무관하였다. 또 上記 色素溶液에 각 10%의 添加溶劑 amine, alcohol, halogen類 化合物등을 加하여 高體酸의 色素吸着率의 변화(吸着阻害率)에 대하여 조사한 결과 위에 적은 順으로 그 영향이 적어지고, 同族體에서는 分子量이 적을 수록 그 영향이 커짐을 알았다. 따라서 非水溶液에서의 吸着은 amine基, 水酸基등과 같은 陰性基를 갖는 化合物은 選擇吸着하고 界面張力에 무관계하여 Traulbe系列의 逆轉現象을 나타내었다. 그 逆轉現象(吸着潮害現象)은 그 順位가 添加溶制의 雙極子能率과 대체적으로 일치하는 것으로 보아 固體酸模體인 活性硅酸과 被吸着體사이의 極盛的化學吸着에 의한 것이라 推定된다. 本實驗結果로부터 固體酸의 非水溶液에서의 吸着메카니즘, Traube 系列의 逆轉現象에 관하여 考察하게 되었다.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.163-173
• /
• 2023

The presence of high amounts of organic and inorganic contaminants in textile wastewater is a major environmental concern. Therefore, the treatment of textile wastewater is an urgent issue to save the aquatic environment. The disposal of large quantities of untreated textile wastewater into inland water bodies can cause serious water pollution. In this study, synthetic dye wastewater samples were prepared using orange dye in the laboratory. The synthetic samples were then treated by a batch adsorption process using the prepared activated carbon (AC) from date pits. The wastewater parameters studied were the pH, total dissolved solids (TDS), total suspended solids (TSS), electrical conductivity (EC) and salinity. The activated adsorption process showed that the maximum removal efficiencies of electric conductivity (EC), salinity, TDS and TSS were 65%, 92%, 89% and 90%, respectively. The removal efficiencies were proportional to the increase in contact time (30-120 min) and AC adsorbent dose (1, 3 and 5 g/L). The adsorption profile indicates that 5 g/L of adsorbent delivers better results for TDS, EC, TSS and salinity at contact time of 120 min. The adsorption characteristics are better suited to the pseudo-second-order kinetic model than to the pseudo-first-order kinetic model. The Langmuir and Freundlich isotherms were well suited for describing the adsorption or contact behavior of EC and TSS within the studied system.

• 분석과학
• /
• 제37권1호
• /
• pp.39-46
• /
• 2024

Alizarin dye, a persistent and hazardous contaminant in aquatic environments, presents a pressing environmental concern. In the quest for efficient removal methods, adsorption has emerged as a versatile and sustainable approach. This study focuses on the development and application of Zinc Oxide/Nickel Oxide (ZnO/NiO) nano-composites as adsorbents for alizarin dye removal. These semiconducting metal oxide nano-composites exhibit synergistic properties, offering enhanced adsorption capabilities. Key parameters affecting alizarin removal, such as contact time, adsorbent dosage, pH, and temperature, were systematically investigated. Notably, the ZnO/NiO nano-composite demonstrated superior performance, with a maximum alizarin removal percentage of 76.9 % at pH 6. The adsorption process followed a monolayer pattern, as suggested by the Langmuir model. The pseudo-second-order kinetics model provided a good fit to the experimental data. Thermodynamic analysis indicated that the process is endothermic and thermodynamically favorable. These findings underscore the potential of ZnO/NiO nano-composites as effective and sustainable adsorbents for alizarin dye removal, with promising applications in wastewater treatment and environmental remediation.

• 청정기술
• /
• 제18권3호
• /
• pp.312-319
• /
• 2012

말라카이트 그린은 염료로 사용되지만 유해한 독성 물질이다. 본 연구에서는 제올라이트에 의한 말라카이트 그린의 흡착특성을 조사하였다. 일정한 양의 제올라이트에 대해 초기농도, 접촉시간, pH 및 흡착온도 등이 말라카이트 그린의 흡착에 미치는 영향을 회분식 및 칼럼흡착실험을 통하여 연구하였다. 회분식흡착실험을 통해 흡착등온선을 구한 결과 말라카이트 그린의 흡착평형관계는 $25{\sim}45^{\circ}C$ 범위에서 Freundlich 식이 잘 적용되었다. 흡착등온식으로 부터 평가된 k와 ${\beta}$ 값은 각각 23.60~46.88, 0.225~0.347이었다. 입자내 확산모델을 사용하여 흡착기구를 결정하였다. 고정층의 운전조건이 파과곡선에 미치는 영향을 조사하였다. 말라카이트 그린의 유입농도와 초기유속이 증가함에 따라 파과시간은 감소하였다. 층높이가 증가함에 따라 파과시간이 증가하였는데, 흡착대의 길이는 비슷한 양상을 나타냈다.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.