• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.812-817
• /
• 1995

Endodontically treated teeth are usually restored for crown protection, aesthetics, and prevention of root canal recontamination. Restoration of these teeth, however, often requires intracanal posts. Various depths and techniques have been recommended for the preparation of post space. Therefore the purpose of this study was to evaluate the effect that pst preparation has on the coronal seal by linear dye penetration of root canals obturated by lateral condensation, vertical condensation, and thermafil techniques. Forty canals of roots of incisors and canines were cleaned and shaped with the use of a step-back technique. Thirty canals were obturated, 10 each with lateral, vertical, and thermafil techhniques. Five root canals were obturated without a root canal sealer and served as positive controls. Another five root canals were obturated, and their coronal half was sealed with sticky wax and served as negative controls. The apical 5 to 6mm of the filling materials were exposed to india ink for 48 hours. The depth of dye penetration was measured in all groups and statistically analyzed (ANOVA). The results were as follows. 1. The apical plugs in the thermafil groups had the highest degree of coronal dye leakage. 2. The group filled by vertical condensation technique had the lowest degree of coronal dye leakage. 3. No significant statistical difference was found in the amount of coronal dye leakage in canals filled by lateral condensation versus those filled by the veritcal condensation technique. 4. Significant statistical differences in coronal dye penetration were found between the canals filled by thermafil and those filled by the lateral or vertical condensation techniques (p<0.05).

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.31-32
• /
• 2003

The fixation of reactive dyes onto cotton fabrics by means of dry heat treatment was examined in terms of water regain in fabrics. Dye liquors were applied to fabrics by ink-jet printer. The fixation strongly depended on water regain. At certain level of water regain the fixation showed stepwise increase. After this point the fixation reached to saturated value. The observed results were interpreted by the aggregation behavior of dyes and reactivity of hydroxyl group of cellulose depending on the amount of the surrounding water molecules. Urea molecules played a role of water at low water regain to increase the fixation.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.1
• /
• pp.79-90
• /
• 2002

Recently, the research about color matching for the input/output devices of printing process is progressing rapidly by the digitization. The calibration method of flatbed scanner widely used as an input device for prepress process is especially important for color proofing of high quality color prints. In this paper, scanner calibration method using 3-dimensional look-up table and tetrahedral interpolation was examined and analysed comparatively on the three kinds of original copies, such as photograph, dye sublimation proof and ink jet print for IT8.T/2 target.

• The Korean Journal of Zoology
• /
• v.12 no.3
• /
• pp.69-76
• /
• 1969

The phagocytic petencies and birefringences of peritoneal mast cells of rats treated with particular dyes (neutral red, toluidine blue, pyronin, methylene blue, alcian blue, trypan blue, carmine, orange G, aniline blue, Janus green B, and India ink) were analyzed by means of phase contrast microscopy and polarizing microscopy. In addition, cytomorphic effects of the dyes on the peritoneal mast cells were also discussed. Phagocytic activities or ingestion of the dye particles were not observed in most cases, except for the India ink group. Hardly a macrophage appeared without some dark particles which were ingested or phagocytosed. Trypan blue and aniline blue produced very weak birefringence in the cytoplasm of mast cells but the rest did not produce even in the acid medium (neutral red and toluidine blue). The short and slender ectoplasmic processes of the mast cells and the leucocytes were also found in certain groups. The cytomorphic effects of the dyes on the mast cell were slight and variable.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.196-205
• /
• 2023

Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

• Journal of the Korean Society of Costume
• /
• v.50 no.5
• /
• pp.131-142
• /
• 2000

The philological consideration of Korean Buddhist Monk's robe and its reviving have been investigated in traditional way. The configuration and colour of Korean Buddhist monk's robes have been properly adapted for an period, territory, and atmospheric phenomena. In case of Korea, introduced Buddhism from China realize modern robe from under the influence of fusion of Chinese ornament culture and Korean traditional ornament culture. As a result of this modern robe has been consisted of a Buddhist monk's robe and a cope. The modem robes has been significantly affected by industrialization, contrary to ancient time taxed robes as public imposts. At present be familiar in mass production we have a preference for the easier way in making and even color forming. In this paper it is focused on dyeing part, which recognized its important in latest time, at first declined according to appearance of chemical dye, evaluated its convenience in use. That is, it is increased natural dye, people begin with recognition of difference of physical properties for dress dyed with chemical pigment and that with natural pigment. In consequence, I have presented that both making colour of gray using traditional method, and three demolished-color prescribed by Buddhist law. Of course, though it become generally know that dyeing of robes occupied significant part of traditional natural dyeing. But in case of religion, it also is important to know symbolical meaning involved in its colour. Most of Buddhism-believers or even Buddhists who actually be dress in robe are without knowing the meaning of colour, or its revealing method. There, I have considered mating three colour of demolished- color included blue, black, and red, and also represented dyeing method of Buddhist monk's robe using both charcoal and ink-spick. From religious font of view, as robes contains involving of blessing, I have an intention of improvement way in dyeing and succession and development of traditional culture through consideration of traditional dyeing method. And I have also intended to restoration the value of robe's colour, disappeared by the time. moreover, I have shown that dyeing with natural pigment is profitable for both environment and sanitary aspect.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.103-111
• /
• 1988

The purpose of this study was to, examine the sealing ability of the denting bonding agent, when used with gutta percha cone, as a root canal sealer. Seventy two upper and lower extracted human teeth with single root were randomly selected and instrumented in a conventional method with K-file. After instrumentation and dry the canal with paper point, there were divided into three groups and twenty four teeth in each group were filled with the following material; In group I: Scotchbond in combination with gutta percha cone. In group II: AH 26 in combination with gutta percha cone. In group III: Tubli-Seal in combination with gutta percha cone. All specimens were immersed in Indian Ink, decalcified, and cleared. The depth of dye penetration into the canals were evaluated by caliper at the intervals of 1 day, 1 week, 2 weeks. The results were as follows; 1. Depth of dye penetration for all groups increased with time. 2. As to difference in mean dye penetration at time interval of 1 day and 14 days, Scotchbond group exhibited the smallest value as 0.53mm and Tubli-Seal group exhibited the largest value as 0.70mm. 3. There was the difference of dye penetration between each group, but its difference was not significant, statistically.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.628-634
• /
• 1996

The purpose of this study was to investigate the effect of moisture on apical sealing properties of root canal. Fifty five single rooted human teeth were selected from maxillary and mandibular teeth. After removing crown portion at the cemento-enamel junction, all teeth were routinely prepared with step-back method. And then, the canals were dried with paper point and the teeth were randomly divided into 3 groups of 15 teeth each, and remaining 10 teeth were used as positive and negative control teeth : Group 1 were irrigated with 1ml of 95% alcohol and dried with air and paper point. Group 2 and 3 were intentionally contaminated with 0.05ml of 3.5% NaOCl or saliva, respectively. All the teeth were obturated with sealapex and gutta percha cone by lateral condensation technique, and covered with two coat of nail varnish after 48 hours of obturation. The teeth were immersed in india ink for 1 week and cleaned with methyl salicylate and then the degree of dye penetration were measured with stereomicroscope. The data were analyzed statistically by one-way ANOVA. The results were as follows : 1. All experimental groups showed varying degrees of dye penetration, and the mean degree of dye penetration was 0.1mm to 0.7mm. 2. Saliva contamination group(group 3) showed the highest amount of dye penetration, followed by NaOCl contamination group, then alcohol dried group, but there was no significant difference among three experimental groups. * This results suggest that there was no significant differences of apical leakage after canal obturation between alcohol dried canal and moisture present canals and the use of alcohol instead of paper point is unnecessary to dry the canals prior to canal filling. But other factors such as bacterial contamination and sealer discoloration by moisture must be considered in application of this results to clinical practice.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.77-87
• /
• 2019

To improve rubbing fastness of the printed fabrics, the binder polymers for Digital Textile Printing(DTP) pigment inks were synthesized with miniemulsion polymerization using various acrylic monomers, which are MMA(Methyl methacrylate), BA(Butyl acrylate), and Self-crosslinking monomers, such as NEA(N-Ethylol acrylamide) and MAA (Methacrylic acid). The acrylic monomer compositions were varied when synthesizing the binder polymers and their particle size distributions, average molecular weights, and Tgs were investigated. The prepared binder polymers were applied to prepare Cyan, Black, Yellow and Magenta pigment ink for DTP and the prepared inks were used to dye cotton fabrics. Then, color strength, and rubbing fastness were also investigated to study the effect of the comonomer compositions of the binder polymer on the color strength and rubbing fastness of the resulting pigment inks.