• 한국의류학회지
• /
• 제26권1호
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.552-555
• /
• 2005

The influence of whole yeast cells $(0{\sim}15%\;w/v)$ on the protein adsorption performance in dye-ligand chromatography was explored. The adsorption of a model protein, bovine serum albumin (BSA), was selected to demonstrate this approach. The UpFront adsorbent $(p=1.5\;g/cm^3)$ derivatised with Cibacron Blue 3GA and a commercially available expanded bed column (20 mm i.d.) from UpFront Chromatography, Denmark, were employed in the batch binding and expanded bed operation. The BSA binding capacity was demonstrated to not be adversely affected by the presence of yeast cells. The dynamic binding capacity of BSA at a $C/C_0=0.1$ biomass concentration of 5, 10, 15% w/v were 9, 8, and 7.5mg/mL of settled adsorbent, respectively.

• 한국의류학회지
• /
• 제43권5호
• /
• pp.753-767
• /
• 2019

Dyeing behavior of indigo leaf powder was examined in regards to the effect of the amount of pigments on color and dye adsorption for silk dyed by reduction and nonreduction dyeing. The amount of indigotin and indirubin pigments adsorbed in dyed silk was examined by HPLC-DAD analysis. The color of dyed silk showed 7.7BG - 2.7B hue when silk was dyed at $50^{\circ}C$, and 3.5G - 4.9BG when dyed at $70^{\circ}C$. Blue ($b^*$) and green ($a^*$) color decreased as the pH of dyebath increased. When silk was dyed using nonreduction, R (red) and RP (red purple) hue and R hue was more apparent in samples dyed at $90^{\circ}C$. In reduction dyeing, amount of indigotin detected from silk exceeded the amount that was initially contained in the input dye. The amount of indirubin was lower than indirubin that was initially in the powder. In nonreduction dyeing, silk showed a higher amount of indirubin adsorption compared to silk dyed by reduction. The amount of indigotin adsorbed in silk was lower than the amount initially contained in the input dye. The amount of indigotin and indirubin adsorption was primarily dependent upon the dyeing method-reduction or nonreduction along with dyeing temperature and the pH of dyebath.

• 대한화학회지
• /
• 제58권2호
• /
• pp.205-209
• /
• 2014

Hematite iron oxide (${\alpha}$-$Fe_2O_3$) nanowalls were fabricated on aluminum substrate by a facile solvent-assisted hydrothermal oxidation process. The XRD and EDS patterns indicate that the sample has a rhombohedral phase of hematite $Fe_2O_3$. FE-SEM, TEM, HR-TEM, SA-ED were employed to characterize the resulting materials. $N_2$ adsorption-desorption isotherms was used to study a BET surface area. Their capability of catalytic degradation of titan yellow GR azo dye with air oxygen in aqueous solution over $Fe_2O_3$ catalysts was studied. The result indicates that the as-prepared product has a high catalytic activity, because it has a larger surface area. Langmuir and Freundlich isotherms of adsorption dye on the catalysts surface were investigated and the decomposition of titan yellow GR follows pseudo-first order kinetic.

• 한국가정과학회지
• /
• 제9권3호
• /
• pp.63-68
• /
• 2006

Walnut colorants were extracted from walnut hull and their dyeing properties on cotton were investigated. Effect of dyeing conditions on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Walnut colorants showed low affinity to cotton compared with wool and its isotherm adsorption curve was Freundlich type. It was considered that hydrogen bonding and van der Waal's force were involved in the adsorption of walnut colorants onto cotton. The dyed cotton showed YR color and there was no significant color change as pH changed. The dyed cotton showed generally high colorfastness except fastness to washing and light. Mordanting did not improve dye uptake and colorfastness, and not affect color of the dyed cotton significantly.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.167.2-167.2
• /
• 2014

In this work, ZnO shell on mesoporous $SiO_2$ ($ZnO/SiO_2$) was prepared by atomic layer deposition (ALD). Diethylzinc (DEZ) and $H_2O$ were used as precursor of ZnO shell. $ZnO/SiO_2$ sample was characterized by X-ray diffraction (XRD), N2 sorption isotherms, X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR). $ZnO/SiO_2$ showed higher adsorption capacity of MB than that of bare mesoporous $SiO_2$ and the adsorption capacities of $ZnO/SiO_2$ could be regenerated by UV exposure through the photocatalytic degradation of the adsorbed MB. This system could be used for removing organic dye from water by adsorption and reused after saturation of adsorption due to its photocatalytic regeneration.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.121-127
• /
• 2020

The analysis method of relative adsorption of disperse dyes on impregnated polyurethane resin and polyester fiber separately was investigated. The solvents for extracting the dyes from polyurethane resin and polyester fiber were determined by acetone and DMF, respectively. By extracting the dyed fibers with acetone at room temperature within 30 minutes, the dyes adsorbed only on the polyurethane resin could be extracted. And then by additional extracting the same fabrics with DMF at 95℃ for longer than 1 hour, the dyes adsorbed on polyester fabrics was extracted. This means that the dyes adsorbed on polyurethane and polyester could be extracted separately and that relative adsorption of the dyes on the both components could be analyzed quantitatively. Using this analysis method, the relative adsorption of a disperse dye was investigated after reduction clearing with various conditions.

• 한국환경농학회지
• /
• 제39권4호
• /
• pp.289-296
• /
• 2020

BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.

• 한국잠사곤충학회지
• /
• 제27권1호
• /
• pp.42-46
• /
• 1985

반응성 염료의 하나인 vinylsulfone계 염료로 견섬유에 날염하여 증열시간, 호료의 점도, 알카리 농도에 의한 염료량 및 고착량의 변화를 측정하여 반응성 염료의 견에 대한 날염 특성을 검토하고 연구한 결과를 다음과 같이 요약한다. 1) 증열 시간과 더불어 염착량 및 고착량은 증가하였으며 염착량과 고착량은 비례관계를 나타내고 있다. 2) 고착율은 80% 이상으로 높은 고착율을 나타내고 있다. 3) 호료의 점도에 따라 염착량과 고착량이 달라지며 적당한 점도가 요구됨을 시사한다. 4) 알카리 농도는 염착량과 고착량의 변화에 큰 영향을 주는 요인이었으며 적당량의 알카리 첨가가 필요함을 나타낸다. 5) 세탁 견뢰도와 일광 견뢰도가 뛰어났으며 실용상 매우 우수한 염료임이 입증되었다. vinylsulfone계 염료는 우수한 발염성과 견뢰도를 가지고 있어서 견질물의 염색분야에 충분한 응용을 기할 수 있다.

• 공업화학
• /
• 제32권3호
• /
• pp.283-289
• /
• 2021

석탄계 활성탄(CAC)에 의한 carbol fuchsin (CF) 염료의 흡착 특성을 pH, 초기농도, 온도 및 접촉시간을 흡착변수로 사용하여 조사하였다. CF는 수중에서 해리하여 양이온인 NH₂⁺를 가지게 되는데, 염기성 영역에서 음전하를 가진 활성탄의 표면과 정전기적 인력으로 결합하였으며 최적조건인 pH 11에서 96.6%를 흡착하였다. 등온흡착은 Langmuir, Freundlich, Temkin 및 Dubinin-Radushkevich 모델을 사용하여 해석하였다. 실험결과는 Langmuir 식이 더 잘 맞았다. 따라서 흡착 메카니즘은 균일한 에너지 분포를 가진 활성탄 표면에서 단분자층으로 흡착된다고 예상되었다. 평가된 Langmuir의 무차원 분리계수 값들(R_L = 0.503~0.672)로부터 활성탄에 의해 CF를 효과적으로 처리할 수 있다는 것을 알았다. Temkin 식과 Dubinin-Radushkevich 식에 의해 구한 흡착에너지는 각각 B_T = 4.397~6.281 kJ/mol과 E = 1.456~2.319 J/mol이었다. 따라서 흡착공정은 물리흡착(B_T < 20 J/mol, E < 8 kJ/mol)으로 나타났다. 흡착속도실험결과는 유사 2차 속도식에 더 잘 맞았다. CAC에 대한 CF 염료의 흡착반응은 온도가 올라갈수록 자유에너지 변화의 음수값이 증가하였기 때문에 온도 증가와 함께 자발성도 높아지는 것으로 나타났다. 양수 값의 엔탈피 변화(12.747 kJ/mol)는 흡열반응임을 알려주었다.