• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.443-460
• /
• 1998

The purpose of this study was to estimate the changes of tensile bond strength according to the difference in lining materials and lining area. Seventy non-carious extracted human molars were used in the present study, and they were randomly assigned into 2 experimental groups according to the difference in lining materials. Each experimental group was subdivided into 3 groups according to the difference in lining area. Circular cavities were prepared on the dentin surface to a diameter of 1.5mm, 2.0mm, 2.5mm and the prepared cavities were filled with Fuji II LC( Glass Ionomer Cement : GIC) or Dycal. Dentin specimens without circular cavity were used as control group. The primer and bonding agent of All-Bond 2 and composite resin (Z-100, 3M Dental Products, U. S. A.) were applied to the exposed dentin surface with or without lining. Tensile bond strengths for the experimental specimens were then measured. To examine the interface between dentin and liner & between liner and composite resin, two specimens from each group were fabricated and observed under the SEM. The results were as follows. 1. Tensile bond strength for the specimens lined with GIC was higher than that for specimens lined with Dycal. However, there was no significant difference between two groups(p>0.05). 2. Tensile bond strength for the specimens lined with GIC in a diameter of 1.5mm(GIC-1.5mm lining group) was statistically higher than that for the GIC-2.0mm lining group and GIC-2.5mm lining group(p<0.05). 3. Tensile bond strength for the specimens lined with Dycal in a diameter of 2.5mm (Dycal-2.5mm lining group)was statistically lower than that for Dycal-1.5mm lining group and Dycal-2.0mm lining group(p<0.05). 4. It was possible to observe the good adhesion of the resin composite to the GIC and the presence of a fissure between GIC and dentin all along the interface. Interfacial gaps of 7.2-$72.2{\mu}m$ between GIC and dentin were observed. The interfacial gap between GIC and dentin at the cavity base was greater. However, the gap was gradually decreased toward the occlusal portion. 5. It was possible to observe the poor adhesion of the resin composite to the Dycal. The detachment of Dycal was occurred all along the composite resin-Dycal interface, and the gaps of 2.0-$30.1{\mu}m$ were formed. In all the specimens, polymerization shrinkage of resin composite caused the detachment of Dycal from the body of Dycal. At a Dycal-dentin interface. it was possible to observe the good adhesion. but poor adhesion with interfacial gap of 2.9-$26.8{\mu}m$ was observed partially.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.93-101
• /
• 1984

The experimental study was made to investigate the effect of the "Heliosit" composite resin on the dental pulp. The 36 class V cavities were prepared on the healthy permanent teeth of 3 days, and were divided into 5 groups and filled with the experimental filling materials. Control group: Zinc Oxide-Eugenol cement filling Experimental groups: Group 1: Dentin Adhesit application & Heliosit filling with or without dycal base Group 2: Heliosit filling with or without dycal base Group 3: Durafill filling with dycal base Group 4: Hipol filling with dycal base Animals were sacrificed after 1 weeks, 2 weeks, and 4 weeks following operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. The results obtained form this study were as follows: 1. All experimental group showed slight pulp response. 2. Dentin Adhesit group showed minimal pulp response in both dycal bases and no base cases. 3. In group 2, mild pulp response was found in early stage and repairing process was found as the time elapsed. In no base cases, healing process was delayed slightly. 4. There was little difference in the result among Heliosit group, Durafill group and Hipol group.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.397-408
• /
• 2011

Objectives: This study investigated changes in gene expressions concerning of differentiation, proliferation, mineralization and inflammation using Human-8 expression bead arrays when white Mineral Trioxide Aggregate and calcium hydroxide-containing cement were applied in vitro to human dental pulp cells (HDPCs). Materials and Methods: wMTA (white ProRoot MTA, Dentsply) and Dycal (Dentsply Caulk) in a Teflon tube (inner diameter 10 mm, height 1 mm) were applied to HDPCs. Empty tube-applied HDPCs were used as negative control. Total RNA was extracted at 3, 6, 9 and 24 hr after wMTA and Dycal application. The results of microarray were confirmed by reverse transcriptase polymerase chain reaction. Results: Out of the 24,546 genes, 43 genes (e.g., BMP2, FOSB, THBS1, EDN1, IL11, COL10A1, TUFT1, HMOX1) were up-regulated greater than two-fold and 25 genes (e.g., SMAD6, TIMP2, DCN, SOCS2, CEBPD, KIAA1199) were down-regulated below 50% by wMTA. Two hundred thirty nine genes (e.g., BMP2, BMP6, SMAD6, IL11, FOS, VEGFA, PlGF, HMOX1, SOCS2, CEBPD, KIAA1199) were up-regulated greater than two-fold and 358 genes (e.g., EDN1, FGF) were down-regulated below 50% by Dycal. Conclusions: Both wMTA and Dycal induced changes in gene expressions related with differentiation and proliferation of pulp cells. wMTA induced changes in gene expressions related with mineralization, and Dycal induced those related with angiogenesis. The genes related with inflammation were more expressed by Dycal than by wMTA. It was confirmed that both wMTA and Dycal were able to induce gene expression changes concerned with the pulp repair in different ways.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2009

This study was carried out in order to determine in vitro biocompatibility of white mineral trioxide aggregate (MTA), and to compare it with that of the commonly used materials, i. e. calcium hydroxide liner (Dycal), glass ionomer cement (GIC), and Portland cement which has a similar composition of MTA. To assess the biocompatibility of each material, cytotoxicity was examined using MG-63 cells. The degree of cytotoxicity was evaluated by scanning electron microscopy (SEM) and a colorimetric method, based on reduction of the tetrazolium salt 2,3 bis {2methoxy 4nitro 5[(sulfenylamino) carbonyl] 2H tetrazolium hydroxide} (XTT) assay. The results of SEM revealed the cells in contact with GIC, MTA. and Portland cement at 1 and 3 days were apparently healthy. In contrast, cells in the presence of Dycal appeared rounded and detached. In XTT assay, the cellular activities of the cells incubated with all the test materials except Dycal were similar, which corresponded with the SEM observation. The present study supports the view that MTA is a very biocompatible root perforation repair material. It also suggests that cellular response of Portland cement and GIC are very similar to that of MTA.

• Restorative Dentistry and Endodontics
• /
• v.4 no.1
• /
• pp.11-16
• /
• 1978

This experimental study was made to investigate the effect of the "Hi-Pol" composite resin on the human dental pulp. 38 cavities of healthy permanent teeth were divided into 5 groups which were used as experimental materials. Group 1: Zinc Oxide-Euginol paste was applied to the cavities as controls $\cdots\;\cdots8$ cases Group 2: "Hi-Pol"*filling with Dycal** base $\cdots\;\cdots9$ cases Group 3: "Hi-Pol" filling without Dycal base $\cdots\;\cdots9$ cases Groud 4: Adaptic*** filling with Dycal base $\cdots\;\cdots6$ cases Group 5: Adaptic filling without Dycal base $\cdots\;\cdots6$ cases The treated teeth were extracted after 1 week, 2 weeks, 3 weeks and 4 weeks and processed for histological study. The results obtained from this experimental study were as follows; 1. The controls applied zinc oxide-eugenol showed the minimal pulp response and group 3 and group 5 showed the most severe pulp response. 2. In group 3 and group 5, the severity of pulp response increased in intensity according to the time elapsed. 3. In group 2 and group 4, the mild pulp response was found in earlier stage and the repairing process could be observed in later stage. * Boo-Pyung Co., Korea ** L. D. Caulk Co., Milford, Del. 19963 *** Johnson and Johnson Co., New Brunswick, NJ 08903.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.77-97
• /
• 1989

The purpose of this study was to observe the effect of ${\beta}GP$ in the remaining dental pulp tissue after pulpotomy in the dogs' teeth. For vital pulpotomy, 72 dogs' teeth were used and class V cavities were prepared and the pulps were amputated. ZOE and Dycal (Caulk Co., USA) were placed over the amputated tissue and cavities were sealed with ZOE cement in the control group. In the experimental group, ${\beta}GP$, ${\beta}GP$-ZOE, ${\beta}GP$-Dycal were placed over the exposed pulp tissues respectively. Dogs were sacrificed after 1, 2 and 4 weeks following the operations and the teeth were decalcified in the nitric acid, sectioned and stained with HE for light microscopic examination. For electron microscopic examination, specimens were made after 2 and 4 weeks following the operation. A comparative microscopic examination revealed as follows. 1. The dentin bridge was formed continuously due to osteodentin in the ${\beta}GP$-Dycal group at the 2nd week, the dentin bridge composed of osteodentin and tubular dentin was observed at the 4th week. 2. Osteodentin formation was vigorously in the ${\beta}GP$-Dycal than in the Dycal group. 3. In the surface of osteodentin the osteodentinoblasts showing vivid synthetic activity were observed and the matrix vesicles were presented during calcification of osteoid dentin matrix. 4. The dentin bridge formation was not observed in ${\beta}GP$ group and ${\beta}GP$-ZOE group.

• The Journal of the Korean dental association
• /
• v.11 no.11
• /
• pp.711-715
• /
• 1973

The author studied histopathologically on the pulpal response of Blendant, Blendant lined with Dycal, silicate cement and direct resin in dog's teeth. The results were as follows ; 1. Blendant induced pulpal irritations but the intensity of irritations were less severe than Silicate cement and Orient. 2. At the postoperative interval of 4 weeks, Silicate cement produced severe pulpal response but the severe response caused by Orient was subsided. 3. Blendant lined with Dycal showed only slight or moderate pulpal response.

• The Journal of the Korean dental association
• /
• v.22 no.9 s.184
• /
• pp.803-811
• /
• 1984

The purpose of this study was to research how temporary cementation effected on the bond strength of permanent cementation. Zinc phosphate, polycarboxylate and EBA ZOE cements were used as permanent cements, and as temporary cements Nogenol, Tempak and Dycal were used. The ninety six (96) specimens were prepared to measure the bond strength of permanent cements after treated with temporary cements for one week. The tensile stregths were measured with an Instron Universal Test Machine. The results of this study were obtained as follows: 1. With zinc phosphate cement, there was a tendency that the bond strengths of the group of temporarily cemented with Nogenol were increased, meanwhile they were decreased a little in the groups of Dycal and Tempak than those of the control group. 2. With polycarboxylate cement, there was a tendency that the bond strengths of the Control group were higher than those of experimental groups and they were decreased in order of Tempak, Noginol, and Dycal. 3. With EBA ZOE cement, there was a tendency that the bond strengths of the group of temporarily cemented with Tempak were increased a little, meanwhile they were decreased a little in the groups of Nogenol and Dycal than those of the Control group. 4. Among the permanent cements, the bond strengths of polycarbosylate cement were the highest and were followed in order of zinc phosphate cement and EBA ZOE cement.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.10.1-10.8
• /
• 2020

Objectives: This study aimed to compare the shear bond strength (SBS) of a self-adhering flowable composite (Dyad Flow) and a bulk-fill flowable composite (Smart Dentin Replacement [SDR]) to several pulp-capping materials, including MTA Plus, Dycal, Biodentine, and TheraCal. Materials and Methods: Eighty acrylic blocks with 2-mm-deep central holes that were 4 mm in diameter were prepared and divided into 2 groups (n = 40 each) according to the composite used (Dyad Flow or SDR). They were further divided into 4 sub-groups (n = 10 each) according to the pulp-capping agent used. SBS was tested using a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed using 2-way analysis of variance. A p value of < 0.05 was considered to indicate statistical significance. Results: A statistically significant difference (p = 0.040) was found between Dyad Flow and SDR in terms of bond strength to MTA Plus, Dycal, Biodentine, and TheraCal. Conclusions: Among the 8 sub-groups, the combination of TheraCal and SDR exhibited the highest SBS.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.107-115
• /
• 1981

The purpose of this investigation was to study histopathological chronology and differences of the proprietary pulpcapping agents. One hundred eighty molars from thrity rats (Srague-Dawley species), weighing about 130gm, were divided into six groups. Cavities were prepared in their maxillary molars under intraperitoneal anesthesia with Secobarbital. The cavities in the right first and second molars were filled with Dycal$^{(R)}$ and the left ones were with Cavitec$^{(R)}$. Each group of rats were sacrificed at the intervals of 1, 3, 5, 7, 14 and 21 days following operation. The rats were decapituated, and the jaws were fixed in 10% neutral buffered formalin. Then the specimens were decalcified, embedded in paraffin or celloid, and sectioned at 6-8 ${\mu}$ in thickness through the cavities included and pulp mesiodistally. They were stained with Hematoxylin-Eosin and examined by lightmicroscope. The results were as follow: 1. The pattern of pulp healing was dependent upon the presence and character of the pulpcapping agents above. 2. Dentin bridge formation as a sign of pulp healing occurred in the 14 days after operation. 3. Dycal$^{(R)}$ reparation appeared to favor pulp bealing rather than Cavitec$^{(R)}$ preparation. 4. In the odontoblastic layer and pulp tissue specific vaculoes were showed at the 3, 5 and 7 days of the Dycal filling.