• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.42-45
• /
• 2012

We have developed an alternating magnetic field stimulation system consisting of a switched-mode power supply and a digital control circuit which modulates a duty ratio to maintain a magnetic field intensity of a few mT even while the frequency increases up to 4 kHz with a controllable coil temperature below $30^{\circ}C$ in air. This duty ratio modulation and water circulation are advantageous for cell culture under ac-magnetic field stimulation by preventing the incubator from exceeding a cell-viable temperature of $37^{\circ}C$. Although the temperature of the coil when subjected to a sinusoidal voltage rapidly increased, that of our system modulated by the duty factor did not change. This is a potentially valuable method to investigate the effects of intermediate frequency magnetic field stimulation on biological entities such as cells, tissues and organs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.1849-1876
• /
• 2022

Wireless Sensor Network (WSN) is considered as an integral part of the Internet of Things (IoT) for collecting real-time data from the site having many applications in industry 4.0 and smart cities. The task of nodes is to sense the environment and send the relevant information over the internet. Though this task seems very straightforward but it is vulnerable to certain issues like energy consumption, delay, throughput, etc. To efficiently address these issues, this work develops a cross-layer model for the optimization between MAC and the Network layer of the OSI model for WSN. A high value of duty cycle for nodes is selected to control the delay and further enhances data transmission reliability. A node measurement prediction system based on the Kalman filter has been introduced, which uses the constraint based on covariance value to decide the scheduling scheme of the nodes. The concept of duty cycle for node scheduling is employed with a greedy data forwarding scheme. The proposed Duty Cycle-based Greedy Routing (DCGR) scheme aims to minimize the hop count, thereby mitigating the energy consumption rate. The proposed algorithm is tested using a real-world wastewater treatment dataset. The proposed method marks an 87.5% increase in the energy efficiency and reduction in the network latency by 61% when validated with other similar pre-existing schemes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.141-146
• /
• 2016

Geotechnial engineering projects that requires excavation activity can cause massive ground deformation and this can damage adjacent structures. Depending on the engineering characteristics of ground material and the excavation depth, the ground movement is various. To overcome this issue, the ground deformation is monitored by multiple sensors. Typically, an inclinometer is installed behind the support wall. In this paper, we present an adaptive duty-cycling control mechanism using wireless sensors for monitoring ground deformation in excavations. The proposed mechanism dynamically adjusts the sleep time based on the urgency degree of sensed data from inclinometer. Through analytical evaluation of expected latency time, we confirm our adaptive duty-cycling mechanism has lower latency compared with periodic duty-cycling mechanism under variable conditions.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.5
• /
• pp.907-915
• /
• 2015

Objective: The purpose of the study is to investigate the curriculum development and operation based on national competency standard (NCS). Methods: The duty of the dental hygienist was analyzed based on DACUM by ten experts in January, 2011. The duty model of the dental hygienist was inspected after duty analysis. The subjects of choice were preventive dentistry and practice. The satisfaction with the subjects were carried out from March to June, 2015. Results: The duty analysis of dental hygienist by DACUM produced preventive dental treatment(11 tasks), oral health education(3 tasks), comprehensive dental hygiene treatment(6 tasks) and 12 categories(156 tasks). Preventive dental treatment was divided into preventive dentistry and practice, oral health education was changed into oral health education and practice, and comprehensive dental hygiene treatment was replace by comprehensive dental hygiene and practice. The contents of preventive dentistry and practice included outline, learning objective, related knowledge and self evaluation. Professional evaluation required mutual experience and evaluation of the students. The mutual evaluation of the students was $4.61{\pm}0.506$(dental plaque control) and $1.80{\pm}0.316$(tooth brushing). The professional evaluation was $1.73{\pm}0.274$(dental plaque control) and $1.60{\pm}0.322$(tooth brushing)(p<0.01). The satisfaction with preventive dentistry and practice was $4.61{\pm}0.506$(improvement in practical work ability), $4.58{\pm}0.511$(knowledge improvement) and $4.55{\pm}0.572$(NCS educational environment) in order. Conclusions: The operation of NCS curriculum is considered to improve practical work ability and to solve skill mismatch between dental industries and educational training institutions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2019

In this study, a maximum power point tracking (MPPT) algorithm based on the perturb and observe (P&O) method with variable step size is proposed to improve the dynamic response characteristic of MPPT, using the existing P&O method. The proposed algorithm, which we verified by simulation and experiment, can track the maximum power point (MPP) through duty control and consisted of three operation modes, namely, constant voltage mode, fast mode, and variable step mode. When the insolation is constant, the voltage variation of the operating point at the MPP is reduced through the step size reduction of the duty in the variable step mode. Consequently, the vibration of the operating point is reduced, and the power generation efficiency is increased. When the insolation changes, the duty and the photovoltaic (PV) voltage are kept constant through the constant voltage mode. The operating point then rapidly tracks the new MPP through the fast-mode operation at the end of the insolation change. When the MPP is reached, the operation is changed to the variable step mode to reduce the duty step size and track the MPP. The validity of the proposed algorithm is verified by simulation and experiment of a PV system composed of a PV panel and a boost converter.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.99-108
• /
• 2014

Purpose - The goals of this study are the following. First, this study focused on customer satisfaction of in-flight service. Specifically, in-flight duty free items were considered because of their potential value related with the differentiated strategy of airline companies. Second, this study analyzed feasible strategies that would fence off the aversive attitudes of consumers toward innovation regarding in-flight duty free items. Third, this study strived to discover implicit routes related with the reactions of of consumers to innovation. Fourth, the construal level theory was applied to the context of in-flight service. Psychological distance is expected to promote acceptance of innovation for duty free items. Research design, data, and methodology - This study consisted of three experiments. All data were collected through the participation of university students. First, the experiment employed a 2×2 between-subject design. The first independent variable was temporal distance (long vs. short of navigation time). The second independent variable was innovativeness (innovative duty free items vs. typical items). Further, experiment 2 involved a 2×2 between-subject design. The first independent variable was social distance (typical vs. atypical stewardess image). The second was innovativeness that was based on a pattern similar to that of the prior experiment. The third experiment involved a 2×2×2 design. The first and second independent variables were temporal distance and item innovation, respectively, based on the method of experiment 1. The third independent variable was cognitive depletion (depletion vs. control condition). Results - Experiment 1 demonstrated that the innovation of duty free items would need to consider the journey time of the airline. Specifically, innovative items were preferred in case of a long journey; typical items, however, were liked in a short journey. Further, experiment 2 demonstrated that, in spite of a short journey, innovative items would be preferred if an atypical stewardess was serving. An atypical stewardess was linked with social distance, and the psychological effects would activate a creative and flexible mindset that would fit with innovative duty free items. The final experiment was accomplished for the examination of cognitive processing of psychological distance on innovation-acceptance. Specifically, if the effects were related with systematic processing, then cognitive effort would be needed. In contrast, if they were related with heuristic processing, then such efforts would not be required. The same pattern appeared under both cognitive depletion and control condition; therefore, the effects of psychological distance were implied to be heuristic processing. Conclusions - Managers need to consider the navigation time, stewardess concepts, and depletion of consumers as important factors for innovative strategy regarding in-flight service. Longer journeys are more successful for innovative trials. Further, a more atypical stewardess image is more successful for atypical service. Long navigation and unfamiliar stewardesses may activate creative and flexible thinking. Further, cognitive depletion of consumers is not a dominant factor of psychological distance effects, because the effects are not related with systematic processing, but with heuristic processing.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.295-299
• /
• 2007

This paper presents the photovoltaic(PV) water pumping system with a maximum power point tracking(MPPT). The wale- pumping system uses a variable speed single phase induction motor(SPIM) driven a centrifugal pimp by field oriented control(FOC) inverter. The MPPT using a DC-DC converter controlled the duty cycle to track maximum power from PV under different insolation conditions. The duty cycle directly relate with a flux producing current control($i_{ds}$). The FOC inverter uses a current control voltage source inverter(CC-VSI). The simulation results are shown that the characteristics and performance of drive system, which varies as each conditions of light by expresses in voltage ($V_{dq}$), current($I_{dq}$), speed of motor and torque.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.138-147
• /
• 1995

The conventional PWM method, which was used in controlling the on-off valve, such as high-speed solenoid valve, was modulating the width of the pulse applied to the valve, by selecting arbitrary sampling time and modulating the duty-ratio in proportion to the error. However, in this method, a selection of long sampling time was inevitable and it was unable to get a high accuracy and a quick response. This study is for designing an appropriate controller for high-speed solenoid valve by proposing an improved duty-ratio modulation method using the Saw-toothed Carrier Wave which enables a short sampling time selection, high accuracy of control, and a quick response. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2019-2020
• /
• 2011

Electric Vehicle Supply Equipment(EVSE) is a system or an equipment to supply electric power for charging the traction batteries on the electric vehicle. Control Pilot is an electric signal generated by EVSE and is transmitted to the electric vehicle by a vehicle coupler and a contact. The duty cycle of control pilot determines the maximum current to be drawn by electric vehicle. When the duty cycle is 5%, it is indicated that digital communication is needed. This paper deals with the data format and definition about communication scheduling through the inband signal on the control pilot of EVSE.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.111-112
• /
• 2017

This paper presents a novel three-port converter for the OnBoard Charger of Electric Vehicles by using an impedance control network. The proposed concept is suitable for charging a main battery and an auxiliary battery of an electric vehicle at the same time due to its power handling capability of the converter without additional switches. The power flow is managed by the phase angle (${\Theta}$) between the ports whereas voltage at each port is controlled by the asymmetric duty cycle and the phase shift (${\Phi}$) between the inverter lags controlled by the impedance control network. The proposed system has a capability of achieving zero voltage switching (ZVS) and zero current switching (ZCS) at all the switches over the wide range of input voltage, output voltage and output power. The feasibility of the proposed system is verified by the PSIM simulation.