• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.37-44
• /
• 2019

It is recommended for the public to stay at home and to close the doors and windows when a high-particulate-matter environment such as a yellow sand event occurs outside. However, there are lack of empirical studies describing how much outdoor PM infiltrates into a closed house and how much indoor PM an inhabitant is exposed to during the period. In this study, the $PM_{10}$ and $PM_{2.5}$ were measured at the kitchen in an apartment house by an optical particle counter for 3 days including a yellow sand event. The outdoor PMs and the outdoor wind speeds were referred from surrounding weather stations. We analyzed the penetration of $PM_{10-2.5}$ and $PM_{2.5}$ at the test house against the outdoor wind speed supposed corresponding to the change of air exchange rate. In addition, the effect of an indoor activity on change in the indoor PM was investigated. In result, the indoor $PM_{10-2.5}$ was very low even a yellow sand event occurred outside; rather, a contribution of indoor activities to increase in $PM_{10-2.5}$ was higher. In contrast, the indoor $PM_{2.5}$ fluctuated following the outdoor $PM_{2.5}$ trend at high wind speeds or remained almost constant at low wind speed.

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.428-442
• /
• 2004

Dustfall samples were collected by the modified American dust jar (bulk type) at 5 sampling sites in the Nakdong river area from lune 2002 to May 2003. Nineteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Si, V, Zn, $Cl^-$, $NO_3^-$, $SO_4^{2-}$, and $NH_4^+$) were analyzed via the combination of ICP/AES, AAS, IC and UV. The purposes of this study were to qualitatively evaluate the chemical composition of dustfalls by examining their regional and seasonal distribution patterns. Computation of the enrichment factor showed that well-defined anthropogenic sources, particularly in Pb were found in the order Gamjeondong (industrial area), Wondong, Silla University, Samrangiin and Mulgum. The seasonal mean of soil contribution showed its highest value (16.3%) during the winter with an annual mean of 11.2%. The concentration ratio of [$SO_4^{2-}/NO_3^-$] was found to be highest (5.12) during the winter, while the lowest ratio value (3.30) was seen during the all. fall, Also regional equivalent ratios of [$SO_4^{2-}/NO_3^-$] were found in the order: Silla University (6.78), Gamjeondong (4.98), Mulgum (3.95), Wondong (3.85), and Samrangjin (2.87). Seasonal distribution of water soluble components for total dustfall were found in the order: spring (71.6%), summer (61.2%), fall (49.2%) and winter (48.6%) with a mean ratio of 57.6%. Regional contribution of sea salts of water soluble ions were found in the order: Silla university (34.5%), Gamjeondong (28.3%), Wondong (17.3%), Samrangiin (17.2%) and Mulgum (13.8%), the total mean contribution rate was 22.1%. As for the chemical composition of dustftll on the lower Nakdong river, there is a decreased influence of sea salt and artificial anthropogenic sources and increased influence of soil particle inland. Also, the total amount of deposition on the lower Nakdong river has decreased, with the river's surface serving as a confounding factor in resuspending dusts.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.267-278
• /
• 2011

Objectives: A great number of hazardous agents can be emitted from various types of art-creation in a fine arts college, but little data on exposure assessment has been published. A variety of processes encompassing toxic or non-toxic materials, tools, and components are involved in a sculptor work at a fine art college. The aim of this study was to assess exposure levels to particulates and noise during sculpture classes in a college of fine arts. Methods: Students in sculpture classes participated in this study. Mass, number, and surface area concentrations of particulates, noise level, temperature and relative humidity were monitored by both personal and area sampling during the tasks of metal, wood, and stone sculpting. Results: The number and surface concentration of particulates was the highest in the task of wood sculpting, followed by metal and stone work. The mass concentration of particulates was the highest in stone sculpting (personal GM 3.0 mg/$m^3$, GSD 3.0), followed by wood (personal GM 1.5 mg/$m^3$, GSD 1.8) and metal work (personal GM 0.95 mg/$m^3$, GSD 1.51) in that order. Occupational exposure limits (OEL) for particulates depends on the type of particulate. For wood dust, 86% (six subjects) of the personal samples and all area samples exceeded the Korean OEL for wood dust (1 mg/$m^3$), while 20% (two subjects) among stone sculpting students were exposed above the Korean OEL (10 mg/$m^3$). In contrast, metal sculpting did not exceed the OEL (5 mg/$m^3$). For noise level, metal sculpting students (Leq 95.1 dB(A) in the morning, 85.3 dB(A) in the afternoon) were exposed the most, followed by stone sculpting (88.3 dB(A)), and wood sculpting (84.8 dB(A)) in that order. Compared with the 90 dB(A) of the Korean OEL and 85 dB(A) of the American Conference of Governmental Industrial Hygienists' threshold limit value (ACGIH-TLV) for noise, 100% of the subjects (five subjects) and area samples during metal sculpting in the morning session exceeded both OELs, but only three subjects (60%) exceeded the ACGIH-TLV in the afternoon session. For stone sculpting, 50% (one subject) and 100% (two subjects) exceeded the Korean OEL and ACGIH-TLV, respectively, but the area sample did not exceed either OEL. During wood sculpting, two subjects (40%) exceeded ACGIH TLV. Conclusions: This work evaluated the sculptors' exposure to particulate matter and noise in fine art college, and revealed a poor working environment for the participating students. Effective measures should be supplemented by the administration of colleges.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1297-1306
• /
• 2017

This study identified physical characteristics and aerosol particle sources of $PM_{10}$ and $PM_{2.5}$ in the industrial complex of Busan Metropolitan City, Korea. Samples of $PM_{10}$, $PM_{2.5}$ and also soil, were collected in several areas during the year of 2012 to investigate elemental composition. A URG cyclone sampler was used for collection. The samples were collected according to each experimental condition, and the analysis method of SEM-EDX was used to determine the concentration of each metallic element. The comparative analysis indicated that their mass concentration ranged from 1% to 3%. The elements in the industrial region that were above 10% were Si, Al, Fe, and Ca. Those below 5% were Na, Mg, and S. The remaining elements (1% of total mass) consisted of elements such as Ni, Co, Br and Pb. Finally, a statistical tool was applied to the elemental results to identify each source for the industrial region. From a principal components analysis (SPSS, Ver 20.0) performed to analyze the possible sources of $PM_{10}$ in the industrial region, five main factors were determined. Factor 1 (Si, Al), which accounted for 15.8% of the total variance, was mostly affected by soil and dust from manufacturing facilities nearby, Factors 2 (Cu, Ni), 3 (Zn, Pb), and 4 (Mn, Fe), which also accounted for some of variance, were mainly related to iron, non-ferrous metals, and other industrial manufacturing sources. Also, five factors determined to access possible sources of $PM_{2.5}$, Factor 1 (Na, S), accounted for 13.5% of the total variance and was affected by sea-salt particles and fuel incineration sources, and Factors 2 (Ti, Mn), 3 (Pb, Cl), 4 (K, Al) also explained significant proportions of the variance. Theses factors mean that the $PM_{2.5}$ emission sources may be considered as sources of incineration, and metals, and non-ferrous manufacturing industries.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.1
• /
• pp.54-62
• /
• 2015

Small scale paint overspray booths are being operated nationwidely, for repair of passenger car body parts. paint aerosols are emitted from the paint overspray booth in operations. In paint overspray booth operations without ventilation system and air pollutants collection unit, it may land on nearby equipment. In this study a removal of sticky paint aerosol for application of the small-scale overspray paint booth. it's cause the surface of filter bag from generated sticky paint aerosol. To remove adhesion of paint aerosol the agglomerating agents are injected and mixed with sticky paint aerosols prior to reach the filter bag. The paint spray rate was set as $10{\pm}5g/min$ from air-atomized spray guns in the spray booth, injection rate of agglomerating was $10{\pm}5g/min$ in the mixing chamber. The filtration velocity including air pollutants varied from 0.2 m/min to 0.4 m/min. Bag cleaning air pressure was set as $5.0kg_f/min$ for detaching dust cake from surface of filter bag. Bag cleaning interval at the filtration velocity of 0.2 m/min was around 3 times longer than that of the 0.4 m/min. The residual pressure drop maintained highest value at the highest filtration velocity. Fractional efficiency of 99.952%~99.971% was possible to maintain for the particle size of 2.5 microns. Total collection efficiency at the filtration velocity of 0.2 m/min was 99.42%. During this study we could confirm high collection efficiency and long cleaning intervals for the test with filtration velocity of 0.2 m/min indicating an optimal value for the given dimensions of the test unit and test operating conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.373-378
• /
• 1999

This study was conducted to investigate the effects of application of the dolomite particles and the shell powder on soil characteristics, dry matter yield and nutritive value of forage in sandy loam soil at the Experimental Field of National Livestock Research Institute, Suweon, from 1994 to 1996. This was compared with control, lime, dolomite 0.5mm, 2.0mm, 4.0mm, and shell powder in mixed pasture. Although there was no significant difference, average dry matter yield for 3 years was increased with the application of lime, dolomite 2.0mm, 0.5mm, control, 4.0mm and shell powder in order. Average crude protein yield of forages was increased with the application of dolomite 2.0mm, 0.5mm, control, lime, shell powder and 4.0mm in order. Lime requirement was slightly increased from 2,410 to 4,853kg per ha with the lapse of time. Although soil hardness was optimum level by second year, it was apt to become hard little by little. Solid phase of soil was lowered with dolomite 0.5mm treatment. The results demonstrated that dolomite and shell powder could be settled a dust problem in farms and a coast pollution as lime substitutes for soil improvement. Therefore, it is desirable for dry matter yield and crude protein yield to applicate the dolomite 2.0mm every 3 years and the shell powder more frequently in sandy loam soil.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.347-354
• /
• 2013

Recently, crushed fine aggregates are being widely used due to the shortage of natural sand. In Korea, the amount of fine particles under 0.08 mm contained in crushed fine aggregates is restricted to be less than 7%, which is similar to the regulations of ASTM but is still very strict compared to the regulations of the other nations. In addition, the crushed aggregates already have in them about 20% of fine particles under 0.08 mm which occurs while they are crushed. The fine particles are not easy to wash out, and also to maximize the use of resources it is deemed necessary to review the possibility of enhancing the limit of the amount of fine particles. Therefore, this study conducted experiments to analyze the characteristics of fine particles under 0.08mm and their influence on the properties of concrete. Experiments using silt and cohesive soil were also done for comparison. In the experiments on fine particles, the methylene blue value was more in the soil dust contained in silt and cohesive soil than in the stone powder contained in crushed fine aggregates. Also, the methylene blue value had a close correlation with packing density and liquid & plastic limit. In the experiments done with concrete, the quantity of high range water reducing agent demanded to obtain the same slump increased as the fine particle substitution rate heightened. However, in the experiment which used stone powder testing the compressive strength and tensile strength of concrete in the same water-cement ratio, there was little change in strength with less than 20% addition of fine particles among the fine aggregates, and no meaningful difference in the amount of drying shrinkage of concrete.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.183-200
• /
• 2017

The classification of airflow patterns during high ozone ($O_3$) and $PM_{10}$ episodes on Jeju Island in recent years (2009-2015), as well as their correlation with meteorological conditions according to classified airflow patterns were investigated in this study. The airflow patterns for $O_3$ and $PM_{10}$ were classified into four types (Types A-D) and three types (Types E-G), respectively, using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and synoptic weather charts. Type A was the most dominant airflow pattern for $O_3$ episodes, being characterized by the transport of airflows from urban and industrial areas in China with the highest frequency (about 69%, with a mean of 67 ppb). With regard to the $PM_{10}$ episodes, Type E was the most dominant airflow pattern, and was mostly associated with long distance transport from Asian dust source regions along northwesterly winds, having the highest frequency (about 92%, with a mean of $136{\mu}g/m^3$). The variations in the concentration of $O_3$ and $PM_{10}$ during the study period were clarified in correlation with two pollutant and meteorological variables; for example, the high (low) $O_3$ and $PM_{10}$ concentrations with high (low) air temperature and/or wind speed and vice versa for precipitation. The contribution of long-range transport to the observed $PM_{10}$ levels in urban sites for different airflow patterns (Types E-F), if estimated in comparison to the data from the Gosan background site, was found to account for approximately 87-93% (on average) of its input. The overall results of the present study suggest that the variations in $O_3$ and $PM_{10}$ concentrations on Jeju Island are mainly influenced by the transport effect, as well as the contribution of local emissions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.323-335
• /
• 2020

In this study, a series of site measurement of particulate and gases pollutants at five tunnels were carried out along with case studies to review the suitability of the current road tunnel ventilation design standards. Previous studies by other researchers have shown that the ratios of the level of measurement to the standard were 27.9%, 1.6% and 3.4% for TSP, CO and NOx, respectively. Those measured in this site study shows even lower ratios; the ratios were 2.6%, 0.8% and 0.3%, for TSP, CO and NOx, respectively. The particle size analysis of TSP for the five tunnels shows that PM10 including tire wear and re-suspended road dust exceeded 20.4%. This implies that non-exhaust particulate matter must be taken into account, since the current design standards for the particulate matter (visibility) include only the engine emission. Based on the recent research results, for vehicle emission rate and slope-speed correction factors, revision of ventilation design standards for pollutants is required. WRA (PIARC) also emphasizes the necessity of the ventilation design standards for pollutants. In addition, enactment of a new road tunnel ventilation system operation standard or guideline is strongly recommended when considering the low operating rate of the ventilation system with jet-fans.