• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.417-422
• /
• 2009

Tunnels that have recently been constructed are characterized by longer length than ever before and furthermore they frequently go through the ground area with poor conditions such as fractured zones. If ground strength is weak, plastic deformation of tunnel occurs, and occasionally a big fall may be brought about. Up to now, the construction work of tunneling has been executed as a sequential method placing the lining concrete after completion of excavation. Such a method requires a long time and much money to complete the tunnel. It is hard to ensure the stability of tunnel if tunnel is left undone for a long time after excavation in fracture zones or plastic grounds. For this reason, we tried to take simultaneous construction of tunnel excavation and lining concrete in order to not only shorten construction schedule but also stabilize the tunnel at the highly fractures zone as soon as possible. As preliminary consideration for simultaneous construction, in-situ tests are performed to calculate the isolation distance over which blasting vibration does not influence the strength of lining concrete. Improvement of ling form, placing method of concrete, ventilation using a dust collector, together with equipment arrangement, was made to assure the simultaneous construction work.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.79-84
• /
• 2003

The main objective of this study was to investigate the chemical characteristics of post-harvest biomass burning aerosols from field burning of barley straw in late spring and rice straw in late fall in rural area in Korea. 12-hr integrated intensive sampling of $PM_{10}$ and $PM_{2.5}$ biomass burning aerosols had been conducted continuously at Gwangju, Korea 4-15 June 2001 and 8 October-14 November 2002. The fine and coarse particles of biomass burning aerosols were collected for mass, ionic, elemental, and carbonaceous species analysis. Average fine and coarse mass concentrations of biomass burning aerosols were measured to be 129.6, 24.2 ${{\mu}gm}^{-3}$ in June 2001 and 47.1, 33.2 ${{\mu}gm}^{-3}$ in October to November 2002, respectively. Exceptionally high level of $PM_{2.5}$ concentration up to 157.8 ${{\mu}gm}^{-3}$ well above 24-hour standard was observed during the biomass burning event days under stagnant atmosphere condition. During biomass burning periods dominant ionic species were $Cl^{-}$, ${NO_3}^{-}$, ${SO_4}^{2-}$, and ${NH_4}^{+}$ in fine and coarse mode. In the fine mode $Cl^{-}$ and ${KCl}^{+}$ were unusually rich due to the high content of the semiarid vegetation. High OC values and OC/EC ratios were also measured during the biomass burning periods. Increased amount of fine aerosols with high enrichment, which were originated from biomass burning of post-harvest agricultural waste, resulted in extremely severe particulate air pollution and visibility degradation in the region. Particulate matters from open field burning of agricultural wastes cause great adverse impact on local air quality and regional climate.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.71-78
• /
• 2021

There are regularly planned overhaul periods in thermal power plants, which involve the maintenance of the boiler of the power plants. However, thermal power plants workers are always exposed to risk during overhaul periods owing to the narrow space and significant dust inside the boiler. Therefore, it is essential to develop a safety monitoring system that is suitable for operating in this type of environment. In this study, we developed not only a worker three-dimensional (3D)-location monitoring system that can monitor and record the entry/exit of workers, their 3D-location, and fall accidents but also a method to secure the working environment and operation efficiency. This system comprises of a worker tag, which was equipped with an inertial measurement unit, a barometric pressure sensor, and a Bluetooth low energy (BLE), and the tags were given to each worker. In addition, the location of workers inside the boiler was measured using a pedestrian dead reckoning (PDR) method and BLE beacons. The location data of the workers tag were transmitted to the integrated database (DB) server through a gateway, and to the administrator monitoring system. The performance of the system was demonstrated inside an actual thermal power plant boiler, and the accuracy and reliability of the system were verified through a number of repeated tests. These results provide insights on designing a new system for monitoring enclosed spaces.

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.428-442
• /
• 2004

Dustfall samples were collected by the modified American dust jar (bulk type) at 5 sampling sites in the Nakdong river area from lune 2002 to May 2003. Nineteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Si, V, Zn, $Cl^-$, $NO_3^-$, $SO_4^{2-}$, and $NH_4^+$) were analyzed via the combination of ICP/AES, AAS, IC and UV. The purposes of this study were to qualitatively evaluate the chemical composition of dustfalls by examining their regional and seasonal distribution patterns. Computation of the enrichment factor showed that well-defined anthropogenic sources, particularly in Pb were found in the order Gamjeondong (industrial area), Wondong, Silla University, Samrangiin and Mulgum. The seasonal mean of soil contribution showed its highest value (16.3%) during the winter with an annual mean of 11.2%. The concentration ratio of [$SO_4^{2-}/NO_3^-$] was found to be highest (5.12) during the winter, while the lowest ratio value (3.30) was seen during the all. fall, Also regional equivalent ratios of [$SO_4^{2-}/NO_3^-$] were found in the order: Silla University (6.78), Gamjeondong (4.98), Mulgum (3.95), Wondong (3.85), and Samrangjin (2.87). Seasonal distribution of water soluble components for total dustfall were found in the order: spring (71.6%), summer (61.2%), fall (49.2%) and winter (48.6%) with a mean ratio of 57.6%. Regional contribution of sea salts of water soluble ions were found in the order: Silla university (34.5%), Gamjeondong (28.3%), Wondong (17.3%), Samrangiin (17.2%) and Mulgum (13.8%), the total mean contribution rate was 22.1%. As for the chemical composition of dustftll on the lower Nakdong river, there is a decreased influence of sea salt and artificial anthropogenic sources and increased influence of soil particle inland. Also, the total amount of deposition on the lower Nakdong river has decreased, with the river's surface serving as a confounding factor in resuspending dusts.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.495-505
• /
• 2006

In order to classify aerosol type, Aerosol Optical Thickness (AOT) and Fine mode Fraction (FF), which is the optical thickness ratio of small particles$(<1{\mu}m)$ to total particles, data from MODIS (MODerate Imaging Spectraradiometer) aerosol products were analyzed over North-East Asia during one year period of 2005. A study area was in the ocean region of $20^{\circ}N\sim50^{\circ}N$ and $110^{\circ}E\simt50^{\circ}E$. Three main atmospheric aerosols such as dust, sea-salt, and pollution can be classified by using the relationship between AOT and FF. Dust aerosol has frequently observed over the study area with relatively high aerosol loading (AOT>0.3) of large particles (FF<0.65) and its contribution to total AOT in spring was up to 24.0%. Pollution aerosol, which is originated from anthropogenic sources as well as a natural process like biomass burning, has observed in the regime of high FF (>0.65) with wide AOT variation. Average pollution AOT was $0.31{\pm}0.05$ and its contribution to total AOT was 79.8% in summer. Characteristic of sea-salt aerosol was identified with low AOT (<0.3), almost below 0.1, and slightly higher FF than dust and lower FF than pollution. Seasonal analysis results show that maximum AOT $(0.33{\pm}0.11)$ with FF $(0.66{\pm}0.21)$ in spring and minimum AOT $(0.19{\pm}0.05)$, FF $(0.60{\pm}0.14)$ in fall were observed in the study area. Spatial characteristic was that AOT increasing trend is observed as closing to the eastern part of China due to transport of aerosols from China by the prevailing westerlies.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.567-580
• /
• 2010

Organic carbon (OC) and elemental carbon (EC) concentrations were determined for $PM_{10}$, $PM_{2.5}$ and $PM_{1.0}$ aerosols particles collected at Gosan Superstation on Jeju Island from August 2007 to September 2008. Aerosols were collected on quartz filters for 24 hours and then OC and EC were analyzed by TOR/IMPROVED method. Mean concentrations of OC and EC were $4.66\;{\mu}g/m^3$ and $1.69\;{\mu}g/m^3$ for $PM_{10}$, $3.95\;{\mu}g/m^3$ and $1.69\;{\mu}g/m^3$ for $PM_{2.5}$, and $3.16\;{\mu}g/m^3$ and $1.42\;{\mu}g/m^3$ for $PM_{1.0}$, respectively. The concentrations of OC and EC comprised 16.4% and 6.0% of $PM_{10}$, 22.9% and 9.8% of $PM_{2.5}$, and 23.0% and 10.0% of $PM_{1.0}$. OC and EC showed a clear seasonal variation with the highest in winter and the lowest in summer. The correlations between the two were also the best during the winter ($R^2$=0.87, 0.94, and 0.95 for $PM_{10}$, $PM_{2.5}$ and $PM_{1.0}$). The ratio of OC/EC exhibited the maximum (7.24) during an Asian dust event due to an increase of OC, which was possibly derived from soil. The mass fraction of both OC and EC was the highest in fall. When OC and EC concentrations were highly elevated, EC1 (the first EC fraction determined at $550^{\circ}C$) and pyrolyzed OC (POC) were dominant subcomponents in winter and OC3 (the third OC fraction determined at $450^{\circ}C$) and POC in spring.

• Journal of Yeungnam Medical Science
• /
• v.9 no.2
• /
• pp.239-247
• /
• 1992

A clinical analysis was done on 134 cases with bronchial asthma who were admitted to the Department of Pediatrics Yeungnam University from May 1987 to October 1991. The results were as followings; 1) The peak age of bronchial asthma was under 2 years. The sex ratio of male to female was 2.9 : 1. 2) The out-break of bronchial asthma was most common in fall, especially in September. 3) The past history of other allergic diseases were present in 22.4% of patients(30/134 cases), and the previous bronchiolitis in infancy were experienced in 12.7% of patients(17/134 cases). 4) According to the skin test for allergens done by RAST, the most common allergens were Mites and House dust. 5) Eosinophilia(T.E.C>250/min) was found in 29.1% of patients, and elevated IgE level(>200 $IU/m{\ell}$) was found in 63.2% of patients. 6) No significant differences in the serum IgE level were found between male and female patients. No significant differences in the serum IgE level were found between asthma patients with and without other allergic diseases. 7) The serum IgE level of school aged patients was significant higher than that of preschool aged(p<0.01).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2719-2726
• /
• 2010

The purpose of this study was to investigate the scientific basic grounds for the assessment of health and environmental diseases resulting from air pollutants in Pohang. For this study, we investigated pollutants, weather characteristics and concentration distribution of fine particles ($PM_10$) yearly and each season, using data from Air Quality Monitoring Stations. The properties of concentration distribution and seasonal fluctuation of $PM_10$ were studied qualitatively and quantitatively using CALPUFF, air dispersion model. The average concentration of $PM_10$ for each season was spring($75.7{\mu}g/m^3$)>summer($56.8{\mu}g/m^3$)>winter($53.6{\mu}g/m^3$)>fall( $52.7{\mu}g/m^3$). In the case of spring, high concentrations appear due to the Asian dust frequently occurring. The contributions of $PM_10$ classified by the types of pollution source in Pohang were point source 62%>mobile source 33%>area source 5%. An important point is that 97% of emissions were produced from the iron manufacture in steel industry. Therefore, it is necessary to control the emission sources of pollutants and to construct an observation system at Pohang steel industrial complex from now on. It’s time to control the risk factors for health and environmental disease to protect the health of resident in Pohang and its neighboring areas.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.

• Journal of International Area Studies (JIAS)
• /
• v.18 no.3
• /
• pp.145-168
• /
• 2014

Given the distance from Mt. Baekdu, volcanic ash will have the direct impact on South Korea in case Mt. Baekdu erupts. Ash fall deposits or particulate matters(PM10) in the air will cause damages in various sectors. In particular, the PM10 impact on the manufacturing sector when the ash disperses in Korea is needed to be assessed since South Korea's manufacturing sector accounts for more than 30% of GDP. Meanwhile the economic impacts of PM10, including Asian dust, have been researched in Korea as the events become frequent, and losses in the manufacturing have been also reported. This study is to identify vulnerable sectors to volcanic ash in the korean industry, and to assess economic losses in case of a Mt. Baekdu eruption scenario, based on the historical loss experience with particulate matters. Study results show that airline, precision such as electronics and semiconductors, distribution, shipbuilding, car, leisure, glass, dairy farming are vulnerable to volcanic ash, or PM10. The economic losses in both car and shipbuilding industry is estimated to 46.49 billion Korean won due to shutdown for 6 hours in case of a Mt. Baekdu eruption scenario.