• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1970-1974
• /
• 2010

This paper is how to improve contaminated air by the pollutant from vehicles through ventilators and entrance at the underground station. We are looking for the environment management to take care of customers. There is two ventilation systems. One is natural ventilation system, the other is forced ventilation system. Usually, subway ventilators were installed low on the sidewalk. There are lots of craps on the ventilators, so these things interrupt influx of outside air. But the gas from the vehicles comes into the station through entrance. There is lots of noise while ventilations run. So we install the supply air vents away from the road for the customers. If it's difficult, we cover around the ventilator with clear plastic plates more than 2M heights. We also install silencer on the ventilators. We install the air curtains on the entrances to prevent dust from outside. Seoul Metropolitan has a plan to make 60M deep underground road. To improve underground road air quality, ventilators should be installed that consider the above information.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.271-276
• /
• 2003

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) of Terra and Aqua satellites, launched in December 1999 and May 2002, has been directly received by Korea Aerospace Research Institute (KARI) ground station facility from July 2002. MODIS scans a swath width of 2330 km that is sufficiently wide to cover Korean peninsular, Yellow and East Sea at once. The MODIS has 36 spectral bands between 0.415 $\mu\textrm{m}$ and 14.235 $\mu\textrm{m}$, i.e., through the visible into the thermal infrared. MODIS has been observed active fires, floods, smoke transport, dust storms, severe storms since February of 2000. The satellite imagery obtained through the MODIS will be utilized for many application such as national territorial management, agriculture, natural environment, atmosphere and ocean, etc. In this study is to introduce various application field of MODIS imagery and data processing system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.19-24
• /
• 2002

Static electricity is an everyday phenomenon. There can be few of us who have not experienced a static shock after sliding across a car seat. Other static nuisance effects include the cling of some fabrics to the body, the sticking of a plastic document cover, or the attraction of dust to a TV or computer screen. However, static electricity has been a serious industrial problem. The age of electronics brought with it new problems associated with static electricity and electrostatic discharge. And, as electronic devices became faster and smaller, their sensitivity to ESD increased. In this work, We are study on the control technique of electo-static discharges using semiconductor circuits. Our circuits are prevented well to electrostatic shock or damages from triboelectric charging in cars everyday life.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.57.1-57.1
• /
• 2021

The icy mantles of interstellar grains are developed by the freeze-out of interstellar molecules and atoms onto grain surfaces. The ice molecules become more complex by surface chemistry induced directly by high energy photons or by the thermal energy diffused over heated grain surface. Therefore, the ice composition is an important tracer of physical conditions where the ices form. Ices have been studied via their absorption features against continuum sources, such as young stellar objects or evolved background stars, in infrared wavelengths. The Spitzer IRS was the most sensitive spectrometer for the observations of infrared ice absorption features. We has been developing an automated analysis tool for the Spitzer IRS spectra, especially for the 15 ㎛ CO₂ bending mode. The 15 ㎛ CO₂ absorption feature is very useful for the study of accretion process in star formation since its spectral shape varies with thermal condition of the dust grains. Eventually, this tool will cover the whole range of the Spitzer IRS spectrum (5~20 ㎛).

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.338-352
• /
• 2023

As of 2019, Korea's fine dust is the most severe among 38 OECD countries, and in the same year, 「the Framework on Disaster and Safety Management」 was revised to define fine dust as a social disaster. Currently, the government is working to achieve its emission reduction goals by preparing a comprehensive fine dust management plan (2022-2023) consisting of a total of five areas, 42 tasks, and 177 detailed tasks. However, it is necessary to come up with measures in consideration of the various spatial characteristics of the city, not just as a source of emission. Therefore, in this study, the shape of the city was classified using the LCZ (Local Climate Zone) classification system into 17 types by building type and land cover type in Busan, and the average annual PM10 and PM2.5 concentration were mapped using the IDW technique. In addition, Fragstats and Moving Window were used to quantify the LCZ classification system. Finally, correlation analysis and regression analysis were conducted to analyze the relationship between the LCZ classification system and PM10 and PM2.5. As a result, it was confirmed that the type of low height of the building and the type of green space with trees had a positive effect on the concentration of PM10 and PM2.5. Therefore, this study is expected to be used as basic data to establish fine dust reduction policies based on efficient spatial planning.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.347-351
• /
• 2002

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) Terra and Aqua satellites, launched in 1999 and 2002, is directly received by Korea Aerospace Research Institute (KARI) ground station facility. BURI engineers develop a system to receive direct broadcast downlink from MODIS to provide near-realtime, remotely-sensed, spaceborne data to the user community in Korea. MODIS scans a swath width of 2330 km that is sufficiently wide to cover Korean peninsular, Yellow and East Sea at once. The MODIS has 36 spectral bands between 0.415 fm and 14.235 $\mu$m, i.e. through the visible into the thermal infrared. MODIS has been observed active fires, floods, smoke transport, dust storms, severe storms since February of 2000. The KARI is preparing for distribution of direct broadcasted MODIS data to users in Korea. The MODIS database system will be designed and developed by KARI engineer for data service from year of 2003. MODIS data user group will be organized from $\.{O}$ctober to December 2002.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.93-96
• /
• 2009

황사를 일으키는 원인인 사막화는 최근 50년간 중국 인구의 급격한 증가와 대규모 벌목, 개간으로 가속화 확대되고 있고 세계적으로 매우 중요한 문제이다. 따라서 원격탐사를 통해 중국 황사발원지들의 사막화 과정을 모니터링하는 것은 매우 중요하다. 2000년 이전에는 주로 고비사막과 황토고원에서 발생하던 황사가 2000년 이후에는 내몽골 고원과 만주부근에서 빈번하게 발원하고 있다. 본 연구에서는 변화하고 있는 지표를 파악하기 위하여 이전 황사발원지인 고비사막과 새로운 황사발원지로 주목받고 있는 만주에 대한 토지피복 비교 분석을 수행하였다. 이를 위해 1999년 (05.01-10.31)과 2007년 (05.01-10.31)의 SPOT/VEGETATION의 NDVI (Normalized Difference Vegetation Index) 10-day 자료를 이용하여 NDVI패턴을 분석하였다. 또한 식생의 밀도에 따라 level로 분류하여 식생상태를 비교하였다. 그 결과 황사발원지들의 동진추세를 확인하였고, 최근 고비사막의 식생상태가 2000년 이전보다 호전되고, 만주는 이전보다 악화된 식생상태를 보였다. 또한 최근 우리나라에 영향을 주는 황사는 만주와 만주 주변 영향을 같이 받는 경향을 보였다.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.21-31
• /
• 2012

This paper presents the short-term and long-term measures to determine the fugitive dust concentration in a contaminated site, which is a crucial step for the determination of particulate emission factor (PEF) for risk assessment. As a long-term measure, USEPA method employing Q/C value (inverse of the ratio of the geometric mean air concentration to the emission flux at center of a 0.5-acre square source) seems to be suitable as it reflects regional-specific meteorological conditions. However, it requires nation-wide database collection and interpretation. Use of ASTM method is an alternative as a short-term measure. The method is readily field-applicable as PEF calculation equation is simple and input parameters can be easily derived at the site of interest as well without the nation-wide efforts. Using ASTM method, PEF at the Former Janghang Smelter Site was determined. According to various mode of aggregate size distribution and fractions of vegetative cover, which are the most important factors in PEF calculation, PEF values at the Former Janghang Smelter Site varied greatly. When the mode of aggregate size distribution was set at 0.25 mm, PEF values at the Former Janghang Smelter Site was 5~20 times higher than the default PEF value (i.e., 35 ${\mu}g/m^3$) shown in the current Korean Soil Contamination Risk Assessment Guidance. On contrast, when the mode was set at 2 mm, PEF values at the Former Janghang Smelter Site was 160~640 times lower than the default PEF value in the Korean Guidance.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.312-318
• /
• 2023

In recent years, fine and yellow dust pollution has become serious in Korea and has negatively affected crop production. Particulate matter (PM) adheres to greenhouse coverings, and it reduces the amount of solar radiation transmitted into a greenhouse. A reduction in light transmittance can have a direct effect on crop photosynthesis and an indirect effect on air temperature in a greenhouse, which can lead to differences in crop yield. The objectives of this study were to investigate the changes in light transmittance of different cover materials by PM and to determine the changes in cucumber growth in a greenhouse due to reduced light transmittance. We measured the changes in light transmittance of polyethylene (PE) and polyolefin (PO) films in the PM generation chambers. Also, cucumber plants were cultivated in a greenhouse with four different light reduction treatments (0, 10, 20, and 30% reduction of light transmittance). The initial light transmittance of PO film was higher than that of PE film and the decrease in light transmittance of PO film due to PM was less than that of PE film. The vegetative growth of cucumber was promoted under the reduced light transmittance treatments; however, the yield of cucumber was highest in the control (0% reduction of light transmittance). From the results, we confirmed that PO film was less PM adhesion and that cucumber yield during the spring season can be reduced by the reduction in light transmittance due to PM.