• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.110-115
• /
• 1998

An axisymmetric Navier-Stokes procedure has been developed to analyze the pulse jet flow in a ceramic filter unit for the dust dislodging process. Using Baldwin-Lomax turbulence model as a closure relationship, the SIAF(Scalar Implicit Approximate Factorization) algorithm together with the ${\delta}^k-Correction$ iterative time marching scheme is adopted to solve the unsteady compressible Navier-Stokes equations. After some validation tests, the code has been applied to solve the pulse jet flow and examine the effects of geometry and reservoir pressure condition on the pressure level inside the filter unit. To avoid dealing with the uncertainty of such factors as the cohesion of the collected dust and the adhesion of the dust to the medium and also to simplify the analysis, the filter wall is assumed to be impermeable. The results for various test cases are presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.231-232
• /
• 2022

Pavement cutting work frequently occurs in new building construction, reconstruction, and complex construction, and this work causes a lot of noise and dust. Eco-friendly pavement cutters are being developed to reduce noise and dust in this work, however the on-site cutting performance of the equipment under development has not been quantified. In this study, the eco-friendly pavement cutter was applied to four residential areas in Seoul and Gyeonggi-do, and its cutting performance was quantified. As a result of the analysis, the eco-friendly pavement cutter showed cutting performance of 20.1~46.9sec/m, and the average was 33.5sec/m. In the future, we plan to conduct additional cutting experiments with various mixing ratios, materials, and depths to confirm the performance of eco-friendly road cutters in more detail.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.267-276
• /
• 2017

Damages have occurred in various fields such as agriculture, industry, and citizen's health due to the yellow dust. Therefore, it is urgent to take measures against it. In this regard, this study collected data of yellow dust over 11 days on a basis of Feb. 23. 2015 when yellow dust was the greatest after 2009, issue words analysis and recomposed health related tweet data. After testing the significance of yellow dust related diseases by association rule analysis with diseases, it obtained the study results as follows: As a result of significance test for the patients with rhinitis, asthma and conjunctivitis by acquiring the condition data of patients from the Health Insurance Review & Assessment Service, conjunctivitis appeared to be significant in 13 cities for 16 cities at 5% significance probability, while asthma and rhinitis showed a significance in 3 and 6 areas. As described above, it is possible to obtain information about citizens' health from SNS data, such as Tweet data and it is judged that these data will provide useful information for establishing measures of citizens' health care.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.603-608
• /
• 2010

A study has been conducted experimentally to investigate behavior of ignition and flame spread over metal dust deposits with particle size using by a developed apparatus and thermogravimetric analysis(TGA). Zr, Ta and Mg-Al(90:10 wt%) alloy metal powders including Mg and Ti with different particle size were used. Also we used PMMA(Polymethylmethacrylate) powder to compare the combustion properties to those of metal powders. When dust layers were more than 5 mm in thickness, the dependency of deposit depth on flame spread rate over dust layer was not shown. With decreasing mean particle diameter, flame spread rate over Ti dust layer decreased, while the spread rate over Mg dust layer increased. For mean diameter of $51{\mu}m$, fire spread rate over pure Mg dust layer decreased to about 50 percent in Mg-Al(90:10 wt%) dust layer. The oxide thickness of metal dust used in this study tended to be inversely proportional with the spread rate, and it was quite small for influence with particle size. From the results of TGA for Ti and Mg, weight increasing curves(550 for Mg, 578 for Ta) were observed in the oxidation process, and they seems to be caused by ignition of upper dust layer.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.109-116
• /
• 2011

This study examined into property of flour dust explosion to get the basic data for safety of industry by protecting accident of dust explosion. The experiment was conducted to know the effect of distance between explodes in the experiment device, effect of flour dust concentration, effect of humidity, effect of explosion pressure to the dust concentration and effect of inactive substance additive. The study indicated that explosion was happened effectively at the optimum distance 100mm or less in inter-polar distance, and minimum ignition energy was measured at 6mm. The data of feed concentration to the probability of explosion showed that the smaller the particle diameter was, the larger probability of explosion was, and the higher the dust concentration was, the more increased the pressure of explosion was, but more than upper limit of dust concentration, then the explosion of pressure decreased. For the effect of humidity, the more it contained water, the more decreased the ignition energy of dust was, so increased minimum explosive concentration, and effective water content was minimum 10% or more. Inactive substance additive was effective in adding more than 15% CaCO3 and CaO as substance inhibiting dust explosion, in which CaCO3 was more effective than CaO. the analysis of the flame of dust explosion was performed by high-speed video camera, it showed the size of flame bacame smaller in order that sub feed, main feed, wheat powder. As a result, sub feed was expected to be less dangerous than others.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.31-38
• /
• 2004

The main purpose of this study is to investigate the characteristics of hybrid collection system combined with centrifugal force of cyclone and filtration of bag filter in one unit system. The experiment and numerical simulation are executed for the analysis of collection efficiency and pressure drop characteristics of hybrid system in comparison with those of a general fabric bag filter with the various experimental parameters such as inlet velocity(filtration velocity), dust concentration and dust type, etc.. In present system, dust particles tangentially coming into the system body are controlled by the centrifugal force effect, and the next collection is made out by the filtration mechanism in the fabric filter media. Therefore, the effective first collection causes the decrease of dust loading on the fabric filter, and it presents quite a lower pressure drop of fabric filter than that of a general fabric filter. At the inlet velocity, $21{\sim}27m/sec$ and inlet concentration(fly ash) $300mg/m^3$, pressure drops through the filter media of hybrid system are shown lower as $10{\sim}22mmH_2O$ comparing to those($17{\sim}33mmH_2O$) of a general fabric bag filter.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.166-173
• /
• 2015

Objectives: The purpose of this study was to evaluate cobalt concentrations in airborne inhalable, total and respirable dust from manufacturing industries using cobalt. Methods: To compare cobalt concentrations, three types of dust samplers(a 37mm closed cassette sampler, Institute of Occupational Medicine(IOM) sampler, and Aluminum cyclone sampler) were used. The analysis of cobalt concentrations was conducted using AAs based on the NIOSH 7300 method. Results: The geometric mean of cobalt concentration in total dust was $1.47{\mu}g/m^3$, and the rate of excess of the Korean Occupational Exposure Limit(KOEL) was 10.0%. The geometric mean concentrations of cobalt in super alloy manufacturing industries were higher than those in plating industries, and molding operations showed higher exposure levels to cobalt than did other operations. Conclusions: The rate of cobalt concentration in inhalable dust from super alloy manufacturing industries exceeding the Workplace Exposure Limit(WEL) as recommended by the Health & Safety Executive(HSE) was 7.1%, which means proper work environmental management is required through wet work environments. Given that molding operations had higher cobalt concentrations, it is necessary to apply measures such as local exhaust for reducing airborne dust in cobalt manufacture industries.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.249-255
• /
• 2000

The comparison of three different kind of simulation by screen3 model, Tem-8 model and EPA formula were undertaken to get a potential concentration and hourly maximum concentration of fugitive dust produced from each construction site in the downtown area of puchon city. The amount of dust estimate U.S EPA formula and fugitive dust formula 22.6078g/sec, 27.9572g/sec respectively. Hourly maximum concenstration at the distance from each construction site by screen3 model are average of $78.89{\sim}728.40{\mu}g/m^3$ and Tem-8 model are $97{\mu}g/m^3$ in site-1, $241{\mu}g/m^3$ in site-2, $268{\mu}g/m^3$ in site-3, $232{\mu}g/m^3$ in site-4, $69{\mu}g/m^3$ in site-5, $36{\mu}g/m^3$ in site-6. Through our experiment, Screen3 model is more encouragingly used than any other model.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.55-60
• /
• 2009

This study was carried out to propose the optimum technologies that can be applicable to noise and fugitive dust controlling in construction sites by comparative analysis in cases. The ninety three environmental management technologies applied to fifty-five construction projects conducted during 2005~2007 in Korea were analyzed by checklist method. The construction companies paid more attention to the noise and fugitive dust controlling technologies than the waste and wastewater. The diverse pollution controlling techniques were applied to the architectural projects than the civil projects to meet the environmental requirements in residential area. The fugitive dust controlling technologies(75.3%) were more widely applied to all construction projects than the noise controlling technologies(24.7%). As the noise controlling techniques, the noise barriers in wall-form which are set up as boundary in construction site were more widely used than the noise barriers in curtain-form, in cabin and silencers. Water spraying systems, wind barriers and mechanical sweepers were the preferred technologies for controlling fugitive dust emission.

• Atmosphere
• /
• v.28 no.4
• /
• pp.491-507
• /
• 2018

This study collected and analyzed records related to the Asian dust phenomenon in Korean history books. I collected a wide range of records from diverse sources and identified data for analysis. 290 records were selected through this process. These records provide a variety of information including the occurrence time and duration of the phenomenon, other natural phenomenon occurring at the same date, descriptions of the phenomenon, and so on. Reports on, Asian dust in the historical records was not continuous or uniform. However, their appearance in certain months of the year is similar to that observed in modern times. In addition, I collected 90 records showing it that can be largely divided into two viewpoints which they were a natural calamity or an unusual phenomenon. Generally, natural phenomenons in historical books are mostly recorded in viewpoint of unusual phenomenon. Nevertheless, research result verified the record as actual observational data. Consequentially, it also indicates that this data is important for research from a meteorological point of view. I think that the data collected through this study can be helpful to modern meteorological studies related to the Asian dust phenomenon.