• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.179-189
• /
• 1999

This study attempts to propose an evaluation considering the property of concrete pore which affects the deterioration of neutralization and the rebar resistance of concrete. Understanding pore property of concrete in using extent, for practical using of concrete manufacturing condition. basic quality property and durability estimation etc, the results of the experiment are as follows. 1) The result of analysis pore property of every specimen with the method of area ratio, in limitation of $10^{-6}{\sim}10^{-5}m$, the pore distribution ratio was maximum. It was high value as W/C was increased and the unit cement content was decreased. 2) In case of using admixture. the volume of pores was some increased as variation of mixing content. In high W/C range, it was very increased compared with plain concrete. 3) Concerned with compressive strength and volume of pores in hardened concrete, it is possible compressive strength estimation using the property of concrete pores. 4) Direct measurement of concrete pore property is difficult. the valuation of the dynamic modulus of elasticity using ultrasonic wave velocity was available. 5) Quantitatively evaluation of concrete structure durability by past result of pore distribution estimation, and it can be estimative scale of property study on the concrete materials.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.83-83
• /
• 2009

The automotive chassis components are structural assemblies that support the engine, suspension, and steering components of the vehicle. For the development of AHSS components, the durability analysis is important. In this paper, the low cycle fatigue property of AHSS was evaluated for the geometry complex and local plasticity in the base material. The GMAW optimization was implemented for the weld soundness using the moving least square method. And the weld S-N curves of AHSS were evaluated to access durability analysis for the weld region. For the verification, the durability analysis of the couple torsion beam axle (CTBA) was performed and compared to the rig test result. The durability analysis using the low cycle fatigue property and the evaluated weld S-N curve of AHSS met the good agreement with the test result.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.73-78
• /
• 2004

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system. To investigate the durability property of core part of injector in liquid phase LPG injection system, leakage test, SEM test of injectors and analysis of unvaporized fuel components with various LPG fuel qualities were tested. The experimental results showed that no serious problem in durability test using favorable LPG fuel quality, while high leakage amount due to the large scratches in the needle and nozzle of the injector were found using LPG fuel with highly containing olefin components, especially butadiene species.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.713-716
• /
• 2006

The main purpose of this research was to enhance the durability in both the design and construction of dams. Especially, in case of rockfill dams, the durability of tunnel concrete in a concrete-faced rockfill dam(CFRD) is achieved by optimizing the fly ash replacement for cement and application of steel fiber. The effect on durability and thermal property corresponding to the increasing replacement of fly ash and application of steel fiber was evaluated, and the optimum value of fly ash replacement and steel fiber application was recommended. The results show that 15% of fly ash replacement and $20kg/m^3$ of steel fiber application was found to be an optimum level and demonstrated excellent performance in durability and thermal property.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.63-66
• /
• 2005

Recently, Trouble of sand supply is occurred according to exhaustion of natural sand resources. therefore, various measures are proposed for solution of trouble of sand supply also the government settled trouble of sand supply through application of crushed sand. but because both crushed sand are poor against general sand, they lead to lowering of qualify of ready-mixed concrete. Therefore, this study evaluated engineering property and durability of concrete using crushed sand and applied evaluation result to fundamental data for quality control of concrete using crushed sand. The results of this study have shown that quality of concrete using crushed sand independently is poor against general concrete. but, the workability, compressive strength and durability of concrete mixed crushed sand with genera can improve on those of concrete used general sand.

• 한국응용과학기술학회지
• /
• 제33권3호
• /
• pp.483-491
• /
• 2016

나노실리카가 코팅된 유리 표면은 나노실리카 표면에 존재하는 친수성 수산기로 인해 방담성이 매우 증가하나, 실외에 설치된 유리에 코팅된 경우는 비에 의해 씻겨 나가 방담 특성의 내구성이 급격히 감소한다. 또한 나노실리카가 코팅된 유리 표면의 토폴로지는 광투과율 또는 반사방지 특성을 좌우하는 매우 중요한 인자이다. 이러한 나노실리카 코팅의 특성에 관한 내구성을 향상시키기 위하여 가교제로 테트라에틸오르소실리케이트 (TEOS)를 사용하여 나노실리카 (Ludox) 현탁액으로 친수성 나노실리카피막을 제조하였다. 산성 또는 염기성 수용액 중에서의 TEOS의 가수 분해 최적 조건도 물에 대한 접촉각 측정을 통하여 조사하였다. pH=4의 산성 조건에서 1.5 wt% 나노실리카-TEOS 코팅액으로 얻은 최종 투명한 친수성 코팅층은 매우 향상된 친수성에 대한 내구성뿐만 아니라, 코팅하지 않은 유리에 비해 약 2 % 포인트 정도 높은 가시광투과율을 나타내었다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.28-33
• /
• 2018

The automotive front bumper guard is the most important part of the vehicle for protecting the life of driver when a traffic accident happens. In order to ensure safe driving, this part must possess sufficient strength and durability. This study was carried out with structural and fatigue analyses by designing front bumper guard models. After the lowest value for maximum total deformation and equivalent stress was found through structural analysis and the highest value for fatigue life was found for all three models, it was shown that the type C front bumper guard model was the most suitable for application to a real car. The strength property and durability of the optimum design were determined through this study's results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.443-444
• /
• 2009

본 연구는 고내구성 혼화재를 모르타르에 적용하여 기초물성과 염소이온 침투저항성을 비교 검토 후 최종적으로 해양환경하의 고내구성 콘크리트를 개발하는데 그 목적을 두었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.653-656
• /
• 2008

본 연구의 목적은 댐의 설계 및 건설에 있어 댐 콘크리트의 내구성을 향상시키기 위한 것이다. 특히, 콘크리트 표면 차수벽형 석괴댐(Concrete Faced Rockfill Dam)의 경우 표면 차수벽 콘크리트의 내구성은 시멘트의 일부를 플라이애쉬로 치환하고 blended 섬유(고인성 섬유 + 일반 섬유)를 사용함으로써 향상될 수 있다. 따라서 본 연구에서는 플라이애쉬의 치환율 및 blended 섬유의 혼입율에 따른 표면 차수벽 콘크리트의 내구성과 열특성 실험을 수행하고 그 효과를 분석하였다. 실험결과 플라이애쉬 치환율은 15%, blended 섬유의 혼입율은 0.1%(고인성 섬유 $0.09kg/m^3$ + 일반 섬유 $0.81kg/m^3$)인 경우 내구성 측면에서 가장 우수한 결과를 보여 주었으며, 특히 다른 배합에 비하여 균열발생 가능성이 상대적으로 낮은 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.1-4
• /
• 2005

This study is to examine adhesion the characteristics of self adhesive asphalt to minimize of the construction periods and the environmental problems through the performance estimation of materials to reduce waterproof problem and the long durability maintenance of building structures. This study tested the estimation items of self rubberized adhesive asphalt to examine the sheet discovered the most important problem in the construction site and the connection stability in the sheet joint. Besides, this study examined the material characteristics such as tension property, tear property, temperature dependence, heat resistance, adhesion stability and so on. Test results of the separative items satisfied in the reference figure of connection stability and adhesion stability which could confirm adhesion performances and other items also satisfied in the reference.